Resumo do conteúdo contido na página número 1
IR/RF LCD 8-DEVICE WITH LEARNING
UNIVERSAL REMOTE CONTROL (URC-9910)
User’s Guide
Resumo do conteúdo contido na página número 2
TABLE OF CONTENTS Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Installing Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Setting The Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Features And Functions . . . . . . . . . . . .
Resumo do conteúdo contido na página número 3
INTRODUCTION The One For All IR/RF LCD 8-Device With Learning Universal Remote Control (URC-9910) is our latest high-performance universal remote control. It is designed to operate up to eight home entertainment devices, including TV, video, and audio components. Moreover, this remote control contains sophisticated technology that will allow you to conveniently consolidate the clutter of all of the original remote controls used in your home entertainment system. It’s packed with easy-to-use fea
Resumo do conteúdo contido na página número 4
Resumo do conteúdo contido na página número 5
SETTING THE CLOCK 1. On the URC-9910 remote control, press and hold SET until you see the display change from the default device and time to [CODE SET]. NOTE: Default values for device, its code, and time are shown above.Your remote control settings may be different. NOTE: If you wish to exit the programming mode at any time, press EXIT once. You will see an [EXIT] message as the remote control returns to normal operation. NOTE: If you see an [INVALID] message, you have inadver- tently pressed a
Resumo do conteúdo contido na página número 6
D N U O S D FEATURES AND FUNCTIONS Use the illustration below to locate features on the URC-9910 remote control and then study the Key Charts (on the next three pages) to learn how they function. SELECT 6 N U O R R U S
Resumo do conteúdo contido na página número 7
D N U O S D Key Charts The LED (red light) blinks to show that the remote control is working and sending signals. The LCD (Liquid Crystal Display) provides 15 alphanumeric charac- ters that display status messages during remote control operation and programming.Also, one or more icons appear in the LCD to indicate the following conditions: or Morning or Afternoon Time Low Battery IR Signal Transmission Press TV, VCR, DVD, AUX, SAT, CBL, RCVR/AMP,or CD once to select a desired home entertainment
Resumo do conteúdo contido na página número 8
FEATURES AND FUNCTIONS Key Charts (continued) Use EXIT to exit from your selected device’s guide or menu. Use INFO to display the current channel and program information. Use VOL+ (or VOL-) to raise (or lower) the audio volume. Press MUTE once to turn the audio off or on. In the TV, VCR, DVD, SAT,and CBL modes, use FAV to scan favorite channels and/or all channels. (See Using Channel Scan and Programming Favorite Channel Scan on page 41.) Use CH+ (or CH-) to select the next higher (or lower)
Resumo do conteúdo contido na página número 9
Use the transport keys to control your VCR, DVD or CD player, or VOD (Video On Demand) if available on your cable or satellite service. To record a VCR program, press REC twice. Use SLEEP to activate your device’s sleep timer (not available for all devices). After programming, press M1 ~ M3 once to run a desired macro (see Using Macros on page 34). After programming, press L1 ~ L4 once to activate a learned function. (See Using Learning on page 30.) Use PIP to switch the Picture-In-Picture featu
Resumo do conteúdo contido na página número 10
SETTING UP YOUR COMPONENTS The URC-9910 remote control is preprogrammed at the factory to operate an RCA TV and VCR, a Motorola (GI) cable converter, an RCA satellite receiver, a Pioneer CD player, a Toshiba DVD player, a Pioneer audio receiver/ amplifier, and a One For All home automation device. To control devices other than the default brands, perform the follow- ing steps and repeat them as needed for each device to be pro- grammed; otherwise skip this section: NOTE: For TV/VCR Combo control
Resumo do conteúdo contido na página número 11
For example, to enter the first GE VCR code (on page 17), press 0 twice, 6 once,0 once, and then SELECT once. If the code is entered correctly, you will see the [SUCCESS] message. 6. Press EXIT to exit the programming mode.You will see an [EXIT SETUP] message as the URC-9910 remote control returns to normal operation. 7. To verify the code works, aim the URC-9910 remote control at the desired device, press its device key once and then press POWER once. The device should turn off. If it does not
Resumo do conteúdo contido na página número 12
Resumo do conteúdo contido na página número 13
6. (Optional) Skip this step if your TV/VCR Combo does not have a separate TV code. Otherwise, press TV once.You will see the display change to [TV] and its current code. Use the keypad to enter the separate TV code for your device. 7. Press EXIT to exit the programming mode.You will see [EXIT SETUP] as the URC-9910 remote control returns to normal operation. 8. To verify the code works, aim the URC-9910 remote control at the desired device, press VCR once and then press POWER once. The TV/VCR
Resumo do conteúdo contido na página número 14
SEARCHING FOR YOUR CODE If your device does not respond to the URC-9910 remote control after trying all codes listed for your brand, or if your brand is not listed at all, try manually searching for your code. For example, to manually search for a code for your TV: 1. Turn on the TV. 2. On the URC-9910 remote control, press and hold SET until you see the display change from the current device and time to [CODE SET]. NOTE: The device, its code, and time are examples. Your remote control settings
Resumo do conteúdo contido na página número 15
SEARCHING FOR YOUR CODE (continued) NOTE: In the manual search mode, the URC-9910 remote control will send IR codes from its library to the selected device, starting with the most popular code first. 7. If the device (e.g., TV) turned off, skip to the next step. If it did not turn off, aim the URC-9910 remote control at the device (e.g., TV) and press the ▲ key once to advance the manual search to the next code (e.g., TV and 0054).Again you will see the LED (red light) blink and the (IR) icon fl
Resumo do conteúdo contido na página número 16
Resumo do conteúdo contido na página número 17
Resumo do conteúdo contido na página número 18
where the learned feature is stored. The feature should activate. If not, try the programming the learning key again, starting with step 1 (on page 29). Deleting A Function From A Learning Key 1. On the URC-9910 remote control, press and hold SET until you see the display change from the cur- rent device and time to [CODE SET]. NOTE: The device, its code, and time are examples. Your remote control settings may be different. NOTE: To exit programming at any time, press EXIT once or allow 30 secon
Resumo do conteúdo contido na página número 19
USING VOLUME LOCK In its default (unlocked) state, the URC-9910 remote control allows each device to control its own volume only in its own mode (e.g., TV volume in the TV mode,VCR volume in VCR mode, etc.). However, using our Volume Lock feature, you can lock the volume controls for each device to all modes (e.g., RCVR/AMP volume in all modes). Moreover, using the Volume Unlock feature (see the next page), you can further customize the settings so that a device’s volume controls are unlocked in
Resumo do conteúdo contido na página número 20
Programming Volume Unlock 1. On the URC-9910 remote control, press and hold SET until you see the display change from the current device and time to [CODE SET]. 2. Press the ▼ key five times until you see the display change to [VOL UNLOCK]. (x 5) NOTE: If you go past [VOL UNLOCK],press the ▲ key one or more times to return to it. SELECT 3. Press SELECT once to begin programming.You will see the display change to [ALL MODE]. To unlock one mode, skip to step 4. Otherwise press SELECT once to unl