Resumo do conteúdo contido na página número 1
CASSETTE RECEIVER
CASSETTEN-RECEIVER
RADIOCASSETTE
RADIO/CASSETTESPELER
KS-LH60R
ATT SOUND
U
R SOURCE F
D
VOL VOL
For installation and connections, refer to the separate manual.
Für den Einbau und die Anschlüsse siehe das eigenständige Handbuch.
Pour l’installation et les raccordements, se référer au manuel séparé.
Bijzonderheden over de installatie en aansluiting van het apparaat vindt u in de
desbetreffende handleiding.
INSTRUCTIONS
BEDIENUNGSANLEITUNG
MANUEL D’INSTRUCTIONS
GEBRUIKSAANWIJZING
Resumo do conteúdo contido na página número 2
How to reset your unit After detaching the control panel, press the reset button on the panel holder using a ball-point pen or a similar tool. This will reset the built-in microcomputer. Note: Your preset adjustments—such as preset channels or sound adjustments—will also be erased. How to use the M (MODE) button If you press M (MODE), the unit goes into functions mode (“MODE” flashes on the upper part of the display). While in functions mode, the number buttons work as different function buttons
Resumo do conteúdo contido na página número 3
Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. CONTENTS How to reset your unit ............................... 2 OTHER MAIN FUNCTIONS ................ 25 How to use the M (MODE) button ............. 2 Changing the general settings (PSM) ....... 25 Detaching the control panel ...................... 29 LOCATION OF THE BUTTONS ............ 4 Control pane
Resumo do conteúdo contido na página número 4
LOCATION OF THE BUTTONS Control panel Display window sd f g h j k l/c zxn v b 1 2 3 4 56 78 9 p q w e r t y u i o ; a 1 (standby/on/attenuator) button Display window 2 SEL (select) button s Disc information indicators 3 Control dial TAG (ID3 Tag), (folder), (track/file) 4 Display window • Lights up only when playing an MP3 disc or a 54 /¢ buttons CD Text on a JVC MP3-compatible CD changer. 65 (up) button d Tape-in indicator 23 (tape direction) button f Main display 70 (eject) button g Playbac
Resumo do conteúdo contido na página número 5
3 • Selects the preset stations while listening to Remote controller the radio (or the DAB tuner). Each time you press the button, the preset station (or service) number increases, and the selected station (or service) is tuned in. ATT SOUND • While playing an MP3 disc on an MP3- compatible CD changer; – Skips to the previous disc if pressed briefly. U – Skips to the previous folder if pressed and held. R SOURCE F Note: While playing a CD on a CD changer, this D always skips to the previous disc
Resumo do conteúdo contido na página número 6
3. Return the battery holder. Preparing the remote Insert again the battery holder by pushing it controller until you hear a clicking sound. Before using the remote controller: • Aim the remote controller directly at the remote sensor on the main unit. Make sure there is no (back side) obstacle in between. WARNING: • Store the battery in a place where children cannot reach. Remote sensor If a child accidentally swallows the battery, • Do not expose the remote sensor to strong consult a doctor im
Resumo do conteúdo contido na página número 7
BASIC OPERATIONS 1 3 2 Turning on the power 3 Adjust the volume. To increase the volume 1 Turn on the power. To decrease the volume Note on One-Touch Operation: Volume level appears. When you select a source in step 2 below, the power automatically comes on. You do not have to press this button to turn on the power. 2 Select the source. Volume (or audio) level indicator (see page 27) 4 Adjust the sound as you want. (See To operate the tuner (FM or AM), pages 23 and 24.) see pages 9 – 18. To play
Resumo do conteúdo contido na página número 8
Setting the clock 4 Set the clock system. 1 Select “24H/12H.” You can also set the clock system to either 2 Select “24H” or “12H.” 24 hours or 12 hours. 12 1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display. (PSM: see page 26.) 5 Finish the setting. 2 Set the hour. 1 Select “CLOCK H” (hour) if not shown on the display. Note: 2 Adjust the hour. To show the clock time on the display, see page 27. 12 To check other information during play, pres
Resumo do conteúdo contido na página número 9
RADIO OPERATIONS To stop searching before a station is received, Listening to the radio press the same button you have pressed for searching. You can use either automatic searching or manual searching to tune in to a particular station. Searching a station manually: Manual search Searching a station automatically: Auto search 1 Select the band (FM1 – 3, AM). Each time you press the 1 Select the band (FM1 – 3, AM). button, the band changes as Each time you press the follows: button, the band chan
Resumo do conteúdo contido na página número 10
3 Tune in to a station you want while Storing stations in memory “MANU” (manual) is flashing. You can use one of the following two methods to To search stations of store broadcasting stations in memory. higher frequencies • Automatic preset of FM stations: SSM (Strong- station Sequential Memory) • Manual preset of both FM and AM stations To search stations of lower frequencies FM station automatic preset: SSM You can preset 6 local FM stations in each FM • If you release your finger from the but
Resumo do conteúdo contido na página número 11
Manual preset 4 Repeat the above procedure to store other stations into other preset You can preset up to 6 stations in each band numbers. (FM1, FM2, FM3, and AM) manually. Notes: Ex.: Storing FM station of 92.5 MHz into the • A previously preset station is erased when a new preset number 1 of the FM1 band. station is stored in the same preset number. • Preset stations are erased when the power supply to 1 Select the band (FM1 – 3, AM) you the memory circuit is interrupted (for example, want to
Resumo do conteúdo contido na página número 12
RDS OPERATIONS To use Network-Tracking Reception What you can do with RDS You can select the different modes of network- RDS (Radio Data System) allows FM stations to tracking reception to continue listening to the send an additional signal along with their regular same programme in its finest reception. programme signals. For example, the stations When shipped from the factory, “AF” is selected. send their station names, as well as information about what type of programme they broadcast, • AF:
Resumo do conteúdo contido na página número 13
Using TA Standby Reception 1 Press and hold SEL (select) for more than 2 seconds so that one of the TA Standby Reception allows the unit to switch PSM items appears on the display. temporarily to Traffic Announcement (TA) from the current source (another FM station, tape, or (PSM: see page 26.) other connected components). • TA Standby Reception will not work if you are listening to an AM station. Press T (TP/PTY) to activate TA Standby Reception. 2 Select “AF-REG” (alternative frequency/regiona
Resumo do conteúdo contido na página número 14
Using PTY Standby Reception 4 Finish the setting. PTY Standby Reception allows the unit to switch temporarily to your favorite programme (PTY: Programme Type) from the current source (another FM station, tape, or other connected components). • PTY Standby Reception will not work if you are 7 When the current source is FM, the PTY listening to an AM station. indicator either lights up or flashes. • If the PTY indicator lights up, PTY Standby You can select your favorite programme type for Recepti
Resumo do conteúdo contido na página número 15
Searching your favorite programme 2 Select one of the twenty-nine PTY codes. (See page 18.) You can search any one of the PTY codes. Selected code name In addition, you can store your 6 favorite appears on the display. programme types in the number buttons. When shipped from the factory, the following 6 programme types have been stored in the number buttons (1 to 6). To store your favorite programme types, see below. To search your favorite programme type, see 3 Press and hold the number button
Resumo do conteúdo contido na página número 16
• If there is a station broadcasting a programme To search your favorite programme type of the same PTY code as you selected, that station is tuned in. 1 Press and hold T (TP/PTY) for more • If there is no station broadcasting a than 2 seconds while listening to an programme of the same PTY code as you FM station. selected, the station will not change. Note: In some areas, the PTY search will not work correctly. Other convenient RDS The last selected PTY code appears. functions and adjustments 2
Resumo do conteúdo contido na página número 17
Changing the display mode while Setting the TA volume level listening to an FM station You can preset the volume level for TA Standby Reception. When a traffic programme is received, You can change the initial indication on the the volume level automatically changes to the display to station name (PS NAME) or station preset level. frequency (FREQ) while listening to an FM RDS • See also “Changing the general settings station. (PSM)” on page 25. • See also “Changing the general settings (PSM)” on
Resumo do conteúdo contido na página número 18
PTY codes NEWS: News SOCIAL: Programmes on social AFFAIRS: Topical programmes expanding activities on current news or affairs RELIGION: Programmes dealing with any INFO: Programmes which impart aspect of belief or faith, or the advice on a wide variety of topics nature of existence or ethics SPORT: Sport events PHONE IN: Programmes where people can EDUCATE: Educational programmes express their views either by DRAMA: Radio plays phone or in a public forum CULTURE: Programmes on national or TRAVEL
Resumo do conteúdo contido na página número 19
TAPE OPERATIONS To stop play and eject the cassette Listening to a cassette Press 0. You can play back type I (normal) tapes. Tape play stops, the control panel flips down. The cassette automatically ejects from the cassette compartment. The source changes to the 1 Open the control panel. previously selected one. If you change the source, tape play also stops (without ejecting the cassette this time). • You can also eject the cassette by pressing 0 while the unit is turned off. Note on One-Touch
Resumo do conteúdo contido na página número 20
To play back tapes recorded with the Dolby B NR* 1 Press M (MODE) to enter the functions mode while listening to a tape. “MODE” flashes on the upper part of the Ex.: When you locate three tunes ahead display. of the current tune 2 Press (Dolby B), while “MODE” is still Each time you press the buttons, the number flashing on the display so that the changes up to ±9. (Dolby B) indicator lights up. When the beginning of the specified tune is “DOLBY B” also appears on the display for located, play
