Resumo do conteúdo contido na página número 1
®
™ ™
MultiSync LCD1735NXM /LCD1935NXM
35SeriesCover 1 5/6/04, 1:47 PM
Resumo do conteúdo contido na página número 2
Index Warning .................................................................................................................... 1 Features & Benefits .............................................................................................. 2 Contents ................................................................................................................. 3 Quick Start ............................................................................................................. 4 C
Resumo do conteúdo contido na página número 3
WARNING TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT USE THIS UNIT'S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE PRONGS CAN BE FULLY INSERTED. REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, MAKE SURE POWER CORD IS UNPLUGGED FROM WALL SOCKET. TO FULLY DISENGAGE THE POWER TO THE UNIT, PL
Resumo do conteúdo contido na página número 4
Features & Benefits Congratulations on your purchase of an NEC-Mitsubishi display. Knowing that your product was developed by a worldwide leader in visual display technology that has delivered innovative solutions for more than 100 years, you can rest assured that your display will provide you with many years of high performance and unforgettable viewing experiences. Every time you turn on your display, you will enjoy a number of features and benefits, including: • High resolution, brightness le
Resumo do conteúdo contido na página número 5
Contents ® Your new NEC MultiSync LCD monitor box* should contain the following: • LCD1735NXM or LCD1935NXM • Power Cord • Video Signal Cable • User’s Manual • Audio Cable • AC Adapter Power Cord Video Signal Cable ® ™ ™ MultiSync LCD1735NXM /LCD1935NXM Audio Cable AC Adapter User’s Manual *Remember to save your original box and packing material to transport or ship the monitor. 3 LCD35Seriesmanual071904.p65 3 7/19/04, 7:24 AM
Resumo do conteúdo contido na página número 6
Quick Start ® To attach the MultiSync LCD monitor to your system, follow these instructions: 1. Turn off the power to your computer. 2. For the PC or MAC with DVI digital output: Connect the DVI signal cable (not included) to the connector of the display card in your system (Figure A). Tighten all screws. For the PC with Analog output: Connect the 15-pin mini D-SUB signal cable to the connector of the display card in your system. Tighten all screws. For the MAC: Connect the MultiSync Macintosh
Resumo do conteúdo contido na página número 7
Quick Start –continued Screen Position Adjustment In order to optimize the best viewing position, you can adjust the tilt of the monitor by using both of your hands to hold the edges of the monitor as shown in the figure below. The monitor can be adjusted to +15 degrees up or -5 degrees down as indicated by arrow below. VESA Wall Mounting While using the VESA mounting function, you need to push the screen backward and it will hold at about 15 degree. Then apply a little bit more force to fold un
Resumo do conteúdo contido na página número 8
Controls 1. Adjustment Control Press the (-) button to decrease the OSM setting and Volume Buttons and press the (+) button to increase the OSM setting, when OSM menu is displaying. Press the (-) or (+) button to decrease or increase the audio volume when OSM menu is not displaying. 2. DC Power Switch/ Press the power switch to switch the monitor ON/OFF. DC Power-On Indicator LED light is blue - power is ON LED light is amber - monitor is in “Power Saving Mode” LED is off - power is OFF 3. Funct
Resumo do conteúdo contido na página número 9
Controls –continued Brightness To increase or decrease the brightness. Contrast To increase or decrease the contrast (analog only). H. Position This function let’s you adjust the display’s horizontal position (analog only). V. Position To adjust the display’s vertical position (analog only). Sharpness To adjust the image sharpness. Five selections are available. A smoother setting is more suitable for pictures, while a sharper setting is more suitable for text (analog only). OSD Transparency To
Resumo do conteúdo contido na página número 10
Recommended Use Safety Precautions and Maintenance FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLOWING WHEN SETTING UP AND USING ® THE MULTISYNC LCD COLOR MONITOR: • DO NOT OPEN THE MONITOR. There are no user serviceable parts inside and opening or removing covers may expose you to dangerous shock hazards or other risks. Refer all servicing to qualified service personnel. • Do not spill any liquids into the cabinet or use your monitor near water. • Do not insert objects of any kind into the cabin
Resumo do conteúdo contido na página número 11
Recommended Use –continued CORRECT PLACEMENT AND ADJUSTMENT OF THE MONITOR CAN REDUCE EYE, SHOULDER AND NECK FATIGUE. CHECK THE FOLLOWING WHEN YOU POSITION THE MONITOR: • For optimum performance, allow 20 minutes for warm-up. • Adjust the monitor height so that the top of the screen is at or slightly below eye level. Your eyes should look slightly downward when viewing the middle of the screen. • Position your monitor no closer than 16 inches and no further away than 28 inches from your eyes. Th
Resumo do conteúdo contido na página número 12
Specifications ® Monitor MultiSync LCD1735NXM™ Notes Specifications Monitor LCD Module with Diagonal : 17.0 inch Active matrix; thin film transistor (TFT) Acrylic Panel Viewable Image Size : 17.0 inch liquid crystal display (LCD); 0.264 mm dot 2 Native Resolution (Pixel Count) : 1280 x 1024 pitch; 250cd/m white luminence; 450:1 contrast ratio, typical Input Signal Video : ANALOG 0.7 Vp-p/75 Ohms Sync : Separate sync. TTL Level Horizontal sync. Positive/Negative Vertical sync. Positive/Negative D
Resumo do conteúdo contido na página número 13
Specifications –continued ® Monitor MultiSync LCD1935NXM™ Notes Specifications Monitor LCD Module with Diagonal : 19.0 inch Active matrix; thin film transistor (TFT) Acrylic Panel Viewable Image Size : 19.0 inch liquid crystal display (LCD); 0.294 mm dot 2 Native Resolution (Pixel Count) : 1280 x 1024 pitch; 250cd/m white luminence; 450:1 contrast ratio, typical Input Signal Video : ANALOG 0.7 Vp-p/75 Ohms Sync : Separate sync. TTL Level Horizontal sync. Positive/Negative Vertical sync. Positive
Resumo do conteúdo contido na página número 14
Troubleshooting No picture • The signal cable should be completely connected to the display card/computer. • The display card should be completely seated in its slot. • Front Power Switch and computer power switch should be in the ON position. • Check to make sure that a supported mode has been selected on the display card or system being used. (Please consult display card or system manual to change graphics mode.) • Check the monitor and your display card with respect to compatibility and recom
Resumo do conteúdo contido na página número 15
References NEC-Mitsubishi Monitor Customer Service & Support Customer Service and Technical Support: (800) 632-4662 Fax: (800) 695-3044 Parts and Accessories/Macintosh Cable Adapter: (888) NEC-MITS [888-632-6487] Customer Service Policies & Processes: http://www.necmitsubishi.com/ css/ServicePolicies/ServicePolicies.htm Online Technical Support Knowledge Base: http://www.necmitsubishi.com/ css/knowledgebase.cfm Customer Service & Technical Support Email: http://www.necmitsubishi.com/ css/tech
Resumo do conteúdo contido na página número 16
Limited Warranty NEC-Mitsubishi Electronics Display of America, Inc. (hereinafter “NMD-A”) warrants this Product to be free from defects in material and workmanship and, subject to the conditions set forth below, agrees to repair or replace (at NMD-A’s sole option) any part of the enclosed unit which proves defective for a period of one (1) year from the date of first consumer purchase. Spare parts are warranted for ninety (90) days. Replacement parts or unit may be new or refurbished and will m
Resumo do conteúdo contido na página número 17
AVERTISSEMENT AFIN D’ÉVITER TOUT RISQUE D’INCENDIE OU D’ÉLECTROCUTION, NE PAS EXPOSER CET APPAREIL À LA PLUIE OU À L’HUMIDITÉ. NE PAS UTILISER LA FICHE D’ALIMENTATION POLARISÉE AVEC UNE PRISE DE CORDON DE RALLONGE OU AUTRE PRISE SAUF SI LES BROCHES PEUVENT ÊTRE ENTIÈREMENT INTRODUITES. NE PAS OUVRIR LE BOÎTIER, LEQUEL CONTIENT DES COMPOSANTS À HAUTE TENSION. CONFIER TOUS TRAVAUX À DU PERSONNEL TECHNIQUE QUALIFIÉ. ATTENTION RISQUE DE DÉCHARGE ÉLECTRIQUE • NE PAS OUVRIR ATTENTION : POUR ÉVITER TOU
Resumo do conteúdo contido na página número 18
Caractéristiques et avantages Nous vous félicitions d’avoir acheté cet écran NEC-Mitsubishi. En sachant que votre produit a été développé par un leader mondial dans le domaine de la technologie d’affichage visuel, lequel a trouvé des solutions innovatrices pour plus des 100 prochaines années, vous pouvez être assuré que votre écran vous offrira une performance élevée ainsi que des expériences de visionnement inoubliables, et ce, pendant de nombreuses années. À chaque fois que vous allumez votre
Resumo do conteúdo contido na página número 19
Contenu ® La boîte* de votre nouveau moniteur NEC MultiSync contient : • Moniteur LCD1735NXM ou LCD1935NXM • Cordon d'alimentation • Câble pour le signal vidéo • Manuel de l’utilisateur • Un cache-câbles • Câble d’audio • Adaptateur CA Cordon d'alimentation Câble pour le signal vidéo ® ™ ™ MultiSync LCD1735NXM /LCD1935NXM Câble d’audio Adaptateur CA Manuel de l’utilisateur * Ne pas oublier de conserver la boîte et le matériel d'emballage d'origine pour transporter ou expédier le moniteur. 17 LCD
Resumo do conteúdo contido na página número 20
Mise en marche rapide Pour raccorder le moniteur LCD au système, suivez les directives ciaprès: 1. Mettez l’ordinateur hors tension. 2. Pour un PC ou un Mac équipé d’une sortie numérique DVI :Branchez le câble DVI-D-DVI-D (non fourni) au connecteur de la carte graphique de votre ordinateur (Figure A). Serrez toutes les vis. Pour un PC équipé d’une sortie analogique :Branchez le câble de signal miniconnecteur D-SUB à 15 broches-DVI au connecteur de la carte graphique de votre système. Serrez tout
