Resumo do conteúdo contido na página número 1
VRCD100M/RMCD100M
CD Player and AM/FM Stereo Receiver
with Auxilary Input jack
Resumo do conteúdo contido na página número 2
Welcome! Dear Customer, CONGRATULATIONS. The VRCD100M/RMCD100M Compact Disc Player and AM/FM Stereo Receiver with AUX Input Jack, when used as described, will give you years of dependable service in your car, truck, RV, or mini-van. We have taken numerous measures in quality control to ensure that your product arrives in top condition and will perform to your satisfaction. In the rare event that your VRCD100M/RMCD100M Compact Disc Player and AM/FM Stereo Receiver with AUX Input Jack contai
Resumo do conteúdo contido na página número 3
Precautions This unit will only play the following discs. Type of disc Label on the disc Recorded material Size of disc CD Audio only 12 cm • Do not attempt to modify the unit. • Do not operate in extremely high or low tem- peratures. The temperature inside the vehicle • Modifying the unit will void the warranty. should be between 32º F (0º C) and 100º F (37º C) before turning on your unit. • Stop the vehicle before carrying out any operation that could interfere with your driv- ing. Care o
Resumo do conteúdo contido na página número 4
Notes on Installation • Disconnect negative battery terminal before starting installation. Consult the vehicle’s owner’s manual for proper instruction. • The unit is designed for a 12 Volt DC negative ground operation system only. Before installing the unit, make sure your vehicle is a 12 Volt DC negative ground system. • Mark the polarity of the existing speaker wires before disconnecting the old unit. • Be sure to connect the color coded leads according to the diagram. Incorrect connec- tion
Resumo do conteúdo contido na página número 5
Before You Install Automotive audio equipment installations can be troublesome at times, even to the most experienced of installation technicians. If you are not confident working with electrical wiring, removing and reinstalling interior panels, carpeting, dashboards or other compo- nents of your vehicle, please call our toll-free help line 1-800-445-1797 and our in-house technical service team will answer your installation questions. Contact the vehicle's manufacturer for vehicle specific
Resumo do conteúdo contido na página número 6
Installation DIN FRONT-MOUNT (Method A) After inserting the Mounting Sleeve into the dashboard, select tabs on top, bottom, and sides, then bend them to secure the mounting sleeve in the dash board.(Fig. 1) Fig. 1 Follow the diagram in Fig. 2 for in- 1. Dashboard 2. Nut (5mm) stalling the rear mounting strap to 3. Spring washer the head unit. The rear mounting 4. Screw (5 x strap will help keep the head unit 25mm) 5. Screw from moving around inside the dash- 6. Strap board. 7. Plain w
Resumo do conteúdo contido na página número 7
Installation DIN REAR-MOUNT (Method B) Installation using the screw holes on both sides of the unit. 1. Screw holes on the side of the unit. 2. Screws. Use either truss screws (5 x 8mm) or flush surface screws (4 x 8mm), depending on the shape of the screw holes in the bracket. 3. Vehicle’s Factory Mounting Bracket 4. Dashboard or Console 5 Hook (Remove this part) Note: The mounting sleeve, outer trim ring, and the mounting strap are not used for this method of installation. PARTS 2 Keys 1
Resumo do conteúdo contido na página número 8
Installation WIRING CONNECTIONS Wiring Harness Socket Antenna Receptacle Wiring Harness & Plug Antenna Cable & Plug Black: Ground Blue/White: Auto-Antenna Yellow: Battery 5A RCA Line Out Red = Right White = Left Red: ACC Power 1A Front Speaker Out (L) Grey (+) White (+) Left Front Right Front Grey / Black (-) White / Black (-) Speaker Wiring Notes Follow the above wiring diagram to install the head unit with new or existing speakers. • This unit is designed for use with two • Never bridge
Resumo do conteúdo contido na página número 9
Location of the Controls 1 2 3 4 VOL+ CD PLAYER / AM/FM STEREO RECEIVER VRCD100M / RMCD100M 21 5 SEL 6 20 7 VOL- 19 18 17 16 15 14 13 12 11 10 9 8 1. Reset 11. Distance / Repeat button 2. CD portal 12. Stereo/ Scan Button 3. LCD screen 13. Clock Tune Button 4. Disc eject 14. Line-in button 5. Station Up & Next Track / Fast 15. EQ Button Forward 16. Mute 6. Band button 17. Power Button 7. Station Down & Previous Track / 18. Radio Tuning knob Fast Reverse 19. Volume increase Button 8. Auxiliary I
Resumo do conteúdo contido na página número 10
Basic Operation 1. Turning the Unit On / Off 4. Balance Press the power button to turn the unit on, Press SEL Button until the display shows press the POWER button again to turn the “BAL”, then use the VOL +/- Buttons to unit off. adjust the volume balance between the left & right speakers. 2. Mode Selection Press the BAND Button to select Radio 5. Loudness Control Mode. Press the LUD/RDM Button to emphasize Press the Play / Pause Button to when the Bass output, the word “LOUD” on the ther
Resumo do conteúdo contido na página número 11
Radio Operation 1. Choose A Radio Band 4. Intro Press the BAND Button anytime to access Press the MO / INT Button to play the first the radio function. The unit has one FM 10 seconds of each track. Press this but- Band and one AM Band. Each press of ton again to when you find the track you the Band Button will change the radio from wish to play. one Band to the other. 5. Repeat 2. Radio Tuning Press the LOC / RPT Button to repeat In Radio Mode, turn the Radio Tuning the same track continuous
Resumo do conteúdo contido na página número 12
Simple Troubleshooting Guide PROBLEM CAUSE/SOLUTION No Power Check wiring connections. Check and make sure the fuse is not blown. Replace with the proper rating/size fuse. Some errors occur in the LCD or Press the RESET Button. nothing functions when buttons are pressed. Unable to receive stations Check and make sure the antenna is con- nected properly. Poor radio reception Check and make sure the antenna is the correct length. Make sure the antenna is not broken. If the antenna is broken, re
Resumo do conteúdo contido na página número 13
S p e c i fi c a t i o n s GENERAL Operating Power ............................................................... 12 Volts DC, Negative Ground Output Wiring ....................................................... Designed for using two speakers only RCA line out ........................................................................... low-level outputs - 250 MV Output Impedance ...................................................... Compatible 4 to 8 Ohm Speakers Fuses ........................
Resumo do conteúdo contido na página número 14
Limited Warranty VIRTUAL REALITY SOUND LABS® products are designed and manufactured to provide a high level of trouble- free performance. VIRTUAL REALITY SOUND LABS® warrants, to the original purchaser, that its products are free from defects in material and workmanship for 30 days from the date of original purchase. As part of our commitment to product excellence. VIRTUAL REALITY SOUND LABS® and/or it’s affiliates routinely improve the designs, materials or production methods of its existin
Resumo do conteúdo contido na página número 15
Resumo do conteúdo contido na página número 16
©2007 Virtual Reality Sound Labs® All designs, logos and images are the exclusive property of Virtual Reality Sound Labs® and/or its affiliates. All rights reserved. 011507 Printed in China 00000
