Manual do usuário Metra Electronics 99-5719

Resumo do conteúdo contido na página número 1

INSTALLATION INSTRUCTIONS FOR PART 99-5719 INSTALLATION INSTRUCTIONS FOR PART 99-5719
APPLICATIONS
FORD TAURUS
2004 - 2007
99-5719
KIT FEATURES
• ISO & DIN Head Unit Provision w/ Pocket
• DDIN Head unit provisions
• Integrated auto climate controls and display
• Integrated passenger airbag light
• Painted Scratch Resistant Matte Black
KIT COMPONENTS
• A) Radio Housing • B) ISO Brackets • C) ISO Trim Plate • D) Pocket
• E) DDIN Brackets • F) DDIN Trim Plate • G) In-Car Temp Sensor Hous

Resumo do conteúdo contido na página número 2

99-5719 99-5719 TABLE OF CONTENTS NOTES DASH DISASSEMBLY • FORD TAURUS 2004 - 2007 . . . . . . . . . . . 1 KIT PREPARATION • FORD TAURUS 2004 - 2007 . . . . . . . . . . . 2 KIT ASSEMBLY • FORD TAURUS 2004 - 2007 . . . . . . . . . 3-6 *NOTE: This product has software that can be flashed via the AXXESS USB-CAB cable and AXXESSINTERFACE.COM. Please contact the Metra tech support team if you feel this product is not performing properly. *NOTE: Refer Also to the

Resumo do conteúdo contido na página número 3

99-5719 99-5719 DASH DISASSEMBLY NOTES FORD TAURUS 2004- 2007 Disconnect the negative 1 A battery terminal to prevent an accidental short circuit. Using Metra’s 86-5618, pull 2 the factory radio/climate control panel from the dash. (Fig. A) Disconnect the audio system 3 B connectors, blower motor switch connector, vacuum hose harness, a/c damper door switch connector, and potentiometer connector. Remove the panel. Remove (2) torx-head screws 4 securing the mounting clips to the

Resumo do conteúdo contido na página número 4

99-5719 KIT PREPARATION 99-5719 FORD TAURUS 2004- 2007 FORD TAURUS 2004- 2007 AUDIO WIRING Remove the In-Car temp 2 1 A Fig. A Back wall sensor housing from the Open the trunk, remove (4) pop- back of the factory control clips from the driver’s side trunk Inside edge Back panel. Insert into the includ- of sub-dash wall liner and remove the liner. (see Fig. B ed In-Car temp sensor Fig. A Inside edge Fig. A) ocate the factory tuner on of sub-dash housing and mount the the wall of the t

Resumo do conteúdo contido na página número 5

99-5719 99-5719 FORD TAURUS 2004- 2007 FORD TAURUS 2004- 2007 DDIN/STACKED ISO DIN DIN HEAD UNIT PROVISION HEAD UNIT PROVISION 1 Locate the factory wiring har- A ......... Continued from Pg.5 ness in the dash. Metra recommends using the prop- Snap the double DIN trim B plate into the radio housing. er mating adapters (included) 5 from Metra and AXXESS to (Fig. B) integrate your new radio. Continue to “Audio Wiring”...... Re-connect the negative bat- tery terminal and test the unit for

Resumo do conteúdo contido na página número 6

99-5719 99-5719 FORD TAURUS 2004- 2007 FORD TAURUS 2004- 2007 DDIN/STACKED ISO DIN ISO DIN HEAD UNIT PROVISION HEAD UNIT PROVISION 1 Locate the factory wiring har- A Locate the factory wiring har- 1 A ness in the dash. Metra ness in the dash. Metra recommends using the proper recommends using the proper mating adapters (included) mating adapters (included) from Metra and AXXESS to from Metra and AXXESS to integrate your new radio. Re- integrate your new radio. Re- connect the negati