Resumo do conteúdo contido na página número 1
DUAL DIN SIZED CD RECEIVER
DPX-MP2100
INSTRUCTION MANUAL
© B64-3612-00/00 (MW)
Resumo do conteúdo contido na página número 2
Contents Safety precautions 3 Menu system 16 Menu System Notes 4 Activating Security Code Deactivating Security Code General features 5 Touch Sensor Tone Power Manual Clock Adjustment Selecting the Source Display Illumination Control Volume Dimmer Attenuator Switching preout System Q Built-in Amp Setting Audio Control Supreme Setting Adjusting the detail of Audio Control B.M.S. (Bass Management System) Audio Setup B.M.S. Frequency Offset Speaker Setting AMP Control Subwoofer Output CRSC (Clean R
Resumo do conteúdo contido na página número 3
Safety precautions About CD players/disc changers connected 2WARNING to this unit To prevent injury or fire, take the following Kenwood disc changers/ CD players released in 1998 precautions: or later can be connected to this unit. • To prevent a short circuit, never put or leave any Refer to the catalog or consult your Kenwood dealer metallic objects (such as coins or metal tools) inside for connectable models of disc changers/ CD players. the unit. Note that any Kenwood disc changers/ CD
Resumo do conteúdo contido na página número 4
Notes • If you experience problems during installation, device. consult your Kenwood dealer. • Playing order of the Audio file • When you purchase optional accessories, check with In the example of folder/file tree shown below, the your Kenwood dealer to make sure that they work files are played in the order from to . with your model and in your area. : F Folder older CD ( ) • The characters which can be displayed by this unit : A Audio file udio fi are A-Z 0-9 @ " ‘ ` % & * + – = , .
Resumo do conteúdo contido na página número 5
General features DISP VOL Control knob ATT Q SRC Auxiliary input Clock display LOUD indicator ATT indicator * An equipment such as a portable audio player can Power be connected to the auxiliary input terminal using a commercially available mini-plug (3.5ø). Turning ON the Power Press the [SRC] button. ⁄ • Use the mini-plug which is stereo type and does not Turning OFF the Power have any resistance. Press the [SRC] button for at least 1 second. Volume Selecting the Source Increasing Volume Pr
Resumo do conteúdo contido na página número 6
General features Attenuator Audio Control Turning the volume down quickly. 1 Select the source to adjust Press the [ATT] button. Press the [SRC] button. Each time you press the button, the Attenuator 2 Enter Audio Control mode turns ON and OFF. Press the [VOL] knob. When the Attenuator is ON, the "ATT" indicator blinks. 3 Select the Basic Audio item to adjust Press the [VOL] knob. Each time you press the knob, the item to be adjusted alternates between the items shown in System Q the table b
Resumo do conteúdo contido na página número 7
Adjusting the detail of Audio Control Audio Setup Among the Basic Audio items, you can adjust the Bass Setting the Sound system, such as Cross over level, Middle level, and Treble level in detail. Network. 1 Select the Basic Audio item 1 Select the source to adjust Select the desired item to be set in detail from Press the [SRC] button. followings; 2 Enter Audio Setup mode • Bass level Press the [VOL] knob for at least 1 second. • Middle level 3 Select the Audio Setup item to adjust • Treble le
Resumo do conteúdo contido na página número 8
General features Speaker Setting TEL Mute Fine-tuning so that the System Q value is optimal The audio system automatically mutes when a call when setting the speaker type. comes in. 1 Enter Standby When a call comes in Press the [SRC] button. "CALL" is displayed. Select the "STANDBY" display. The audio system pauses. 2 Enter Speaker Setting mode Listening to the audio during a call Press the [VOL] knob. Press the [SRC] button. The "CALL" display disappears and the audio system 3 Select the Spe
Resumo do conteúdo contido na página número 9
Switching Display Changing the information displayed. Press the [DISP] button. Each time the button is pressed the display switches as shown below. In Tuner source Information Display Frequency "FREQ" Clock "CLOCK" In CD & External disc source Information Display Disc title "D-TITLE" Track title "T-TITLE" Play time "P-TIME" Clock "CLOCK" In Audio file source Information Display Music title & Artist name "TITLE" Album name & Artist name "ALBUM" Folder name "FOLDER" File name "FILE" Play time "P
Resumo do conteúdo contido na página número 10
Tuner/TV control features FM Control knob AM AUTO/AME SRC 1 - 6 Band display Frequency display ST indicator Preset station number Tuning Tuning Mode Selecting the station. Choose the tuning mode. Press the [AUTO] button. 1 Select tuner source Each time you press the button, the Tuning mode Press the [SRC] button. alternates between the modes shown in the table Select the "TUNER" display. below. 2 Select the band Tuning mode Display Operation Push the Control knob towards [FM] or [AM]. Auto see
Resumo do conteúdo contido na página número 11
Function of remote control Auto Memory Entry Direct Access Tuning Putting stations with good reception in the memory automatically. Entering the frequency and tuning. 1 Select the band for Auto Memory Entry 1 Select the band Push the Control knob towards [FM] or [AM]. Press the [FM] or [AM] button. 2 Enter Direct Access Tuning mode 2 Open Auto Memory Entry Press the [DIRECT] button on the remote Press the [AME] button for at least 2 seconds. control. "A-MEMORY" is displayed. "– – – –" is displa
Resumo do conteúdo contido na página número 12
Tuner/TV control features Function of LX BUS Television Function of LX BUS Television TV Tuning Preset TV Tuning Selecting the TV channel of a connected LX BUS Recalling the TV channels in the memory. Television (optional accessory). 1 Select the TV band The action depends on the setting of the connected Push the Control knob toward [FM]. LX BUS Television. Refer to the user instruction of the LX BUS Television for details. 2 Recall the TV channel Press the desired [1] — [6] button. 1 Select T
Resumo do conteúdo contido na página número 13
CD/Audio file/External disc control features Control knob SRC SCAN RDM/ REP F.SEL M.RDM 3 Track number Play time Disc number IN indicator Playing CD & Audio file Playing External Disc Playing discs set in the optional accessory disc When a disc is inserted player connected to this unit. Press the [SRC] button. Press the [SRC] button. Select the "CD" display. Select the display for the disc player you want. ⁄ Display examples: • When a CD is inserted, the "IN" indicator is ON. Display Disc playe
Resumo do conteúdo contido na página número 14
CD/Audio file/External disc control features Function of disc changers with remote control Fast Forwarding and Reversing Direct Disc Search Fast Forwarding Doing Disc Search by entering the disc number. Hold down toward [¢] with the Control knob. Release to resume the playback. 1 Enter the disc number Press the number buttons on the remote Reversing control. Hold down toward [4] with the Control knob. Release to resume the playback. 2 Do Disc Search ⁄ Press the [+] or [–] button. • There is no
Resumo do conteúdo contido na página número 15
Folder name display 2 Release it when the music you want to listen Displays the current folder name. to is played Press the [SCAN] button. Random Play 2 Select the folder level Play all the music on the disc or Audio file folder in Push the Control knob towards up or down. random order. With the up of the Control knob, you move 1 level Press the [RDM] button. down and with the down of the Control knob, 1 Each time you press the button, Random Play turns level up. ON or OFF. When the Random
Resumo do conteúdo contido na página número 16
Menu system Control knob MENU SRC Menu display Menu System 4 Exit Menu mode Press the [MENU] button. Setting beep sound during operation, etc. ⁄ functions. The Menu system basic operation method is • When other items those applicable to the basic operation method above are displayed, their setting explained here. The reference for the Menu items content chart is entered. (Normally the setting listed at and their setting content is after this operation the top of the chart is the original s
Resumo do conteúdo contido na página número 17
⁄ ⁄ • You can set the Security Code with a 4 digit number of your • When the Security Code function is activated, "CODE choice. SET" changes to "CODE CLR". • The Security Code cannot be displayed or referenced. Make • To deactivate the Security Code function, see the next a note of the Security Code and treasure it up. section . 1 Enter Standby Press the [SRC] button. Select the "STANDBY" display. In Standby mode 2 Enter Menu mode Deactivating Security Code Press
Resumo do conteúdo contido na página número 18
Menu system In Standby mode In Standby mode Manual Clock Adjustment Dimmer Dimming this unit’s display automatically when the 1 Select Clock Adjustment mode vehicle light switch is turned ON. Push the Control knob towards up or down. Select the "CLK ADJ" display. Display Setting "DIM AUTO" The display dims. 2 Enter Clock Adjust mode "DIM OFF" The display doesn’t dim. Press the Control knob for at least 1 second. The clock display blinks. 3 Adjust the hours Push the Control knob towards up or do
Resumo do conteúdo contido na página número 19
When LX AMP unit connecting Display Setting "SPRM ON" Plays sound using the Supreme function. AMP Control "SPRM OFF" Plays the original sound stored in the audio file. You can control the LX AMP connected to the unit. ⁄ 1 Select AMP Control mode • The sound effect may be imperceptible depending Push the Control knob towards up or down. on the relationship between the audio file format and Select the "AMP CTRL" display. setting. 2 Enter AMP Control mode Press the Control knob for at least 1 se
Resumo do conteúdo contido na página número 20
Menu system Auxiliary Input Display Setting Text Scroll Selecting the display when changing to Auxiliary Setting the displayed text scroll. input source. Display Setting 1 Select Auxiliary input source "SCL AUTO" Repeats scroll. Press the [SRC] button. "SCL MANU" Scrolls when the display changes. Select the "AUX"/ "AUX EXT" display. ⁄ 2 Enter Menu mode • The text scrolled is listed below. Press the [MENU] button for at least 1 second. - CD text "MENU" is displayed. - Folder name/ File name
