Manual do usuário Kenwood KDC-MP7028

Resumo do conteúdo contido na página número 1

CD-RECEIVER
KDC-X889
KDC-MP828
KDC-MP7028
KDC-MP728
KDC-X789
KDC-MP628
INSTRUCTION MANUAL
Take the time to read through this instruction manual.
Familiarity with installation and operation procedures will help you obtain the best
performance from your new CD-receiver.
For your records
Record the serial number, found on the back of the unit, in the spaces designated on the
warranty card, and in the space provided below. Refer to the model and serial numbers
whenever you call upon your KENWOOD

Resumo do conteúdo contido na página número 2

Contents Safety precautions 4 Tuner features 28 Tuning Notes 5 Tuning Mode Direct Access Tuning About CDs 7 Station Preset Memory Auto Memory Entry About AAC, MP3 and WMA 8 Preset Tuning Notes on Multi-function Key RDS features 30 System 9 Radio Text Scroll PTY (Program Type) General features 10 Registration of a station as a PTY Power Program Type preset Selecting the Source CD/Audio file/External disc control Volume features 32 Attenuator Audio Control Playing CD & Audio file Audio Setup Pla

Resumo do conteúdo contido na página número 3

Menu system 41 Basic Operations of remote 51 Menu System Accessories/ Security Code Installation Procedure 54 Touch Sensor Tone Manual Clock Adjustment Connecting Wires to Terminals 55 Date Adjustment Date Mode Installation 56 Synchronize Clock DSI (Disabled System Indicator) Removing the Unit 58 Selectable Illumination Dimmer Troubleshooting Guide 59 Switching preout Built-in Amp Setting Specifications 63 G-Counter Level set G-Analyzer Reset G-Analyzer Calibration setup G-Analyzer Stop Watch D

Resumo do conteúdo contido na página número 4

Safety precautions About CD players/disc changers 2WARNING connected to this unit To prevent injury or fire, take the KENWOOD disc changers/ CD players released in following precautions: 1998 or later can be connected to this unit. • To prevent a short circuit, never put or leave any Refer to the catalog or consult your Kenwood metallic objects (such as coins or metal tools) dealer for connectable models of disc changers/ inside the unit. CD players. • Never watch the G-Analyzer Display s

Resumo do conteúdo contido na página número 5

Notes • If you experience problems during installation, Before using this unit for the first time consult your Kenwood dealer. This unit is initially set on the Demonstration mode. When using this unit for the first time, cancel the • If the unit fails to operate properly, press the Reset (page 50). button. The unit returns to factory settings when the Reset button is pressed. • Press the reset button if the disc auto changer fails About ODD (Offset Dual Differ

Resumo do conteúdo contido na página número 6

Notes 2Warning About DAB Tuner control 2CAUTION Refer to A group on the Instruction manual of DAB Use of controls or adjustments or performance of Tuner KTC-9090DAB (optional accessory) for the procedures other than those specified herein may control method of DAB Tuner function. result in hazardous radiation exposure. However, the following control methods of the In compliance with Federal Regulations, following function for this unit may be differed from the are reproductions of labels on,

Resumo do conteúdo contido na página número 7

About CDs Handling CDs Removing CDs • Don’t touch the recording surface of the CD. When removing CDs from this unit pull them out horizontally. CDs that can’t be used • CDs that aren’t round can’t be used. • CD-R and CD-RW are easier to damage than a normal music CD. Use a CD-R or a CD-RW after reading the caution items on the package etc. • Don’t stick tape etc. on the CD. • CDs with coloring on the recording surface or that Also, don’t use a CD with tape stuck on it. are dirty can’t be use

Resumo do conteúdo contido na página número 8

About AAC, MP3 and WMA The playable AAC/MP3/WMA file (hereafter called Audio file) and the media format has the following • File/Folder name is the number of the characters limitation. The Audio file, which is out of the including the extensions. specification, may not able to be played normally, • MP3 ID3 Tag can only display the tag of Ver1.X. (KDC- or the file and folder names may not be displayed MP7028/MP728/MP628 only) correctly. • AAC ID3 Tag cannot be displayed. Limitation of stru

Resumo do conteúdo contido na página número 9

Notes on Multi-function Key System Multi-function Key System serves to control various Real operational example of the Multi- functions with the [1] — [6] buttons. function Key System The basic operation of the Multi-function Key Example: Turning ON/OFF the Random Play during System is described below. CD play. 1. Show the function display of the Random Play. If "RDM" is not shown in the display, press the What’s the Multi-function Key System? [NEXT] button to switch the sections until the

Resumo do conteúdo contido na página número 10

General features ANG ATT Control knob VOL Release button NEXT/ 1 – 6 SRC MENU ANG ATT Control knob VOL 1 – 6 Release button NEXT/ SRC MENU Power Volume Turning ON the Power Increasing Volume Press the [SRC] button. Turn the [VOL] knob clockwise. Turning OFF the Power Decreasing Volume Press the [SRC] button for at least 1 second. Turn the [VOL] knob counterclockwise. Selecting the Source Attenuator Turning the volume down quickly. Press the [SRC] button. Press the [ATT] button. Source required D

Resumo do conteúdo contido na página número 11

3 Select the Detail Audio item for adjustment 1 Select the source for adjustment Press the [VOL] knob. Press the [SRC] button. Each time the knob is pressed, the items that 2 Enter Audio Control mode can be adjusted switch as shown below. Press the [VOL] knob. 4 Adjust the Detail Audio item 3 Select the Basic Audio item for adjustment Turn the [VOL] knob. Press the [VOL] knob. Bass level Each time the knob is pressed, the items that can Adjustment Item Display Range be adjusted switch as show

Resumo do conteúdo contido na página número 12

General features Function of the KDC-X889/KDC-MP828 3 Select the Audio Setup item for adjustment Audio Control Press the [VOL] knob. Each time the knob is pressed, the items that can 1 Select the source for adjustment be adjusted switch as shown below. Press the [SRC] button. 4 Setup the Audio item Turn the [VOL] knob. 2 Enter Audio Control mode Press the [VOL] knob. Adjustment Item Display Range 2 Front High Pass Filter* "HPF-F Fc" 3 Select the Audio item for adjustment (KDC-MP728/MP628) Throu

Resumo do conteúdo contido na página número 13

Function of the KDC-X889/KDC-MP828 5 Exit Audio Setup mode Audio Setup Press [VOL] knob for at least 1 second. Setting the Sound system, such as Volume offset and Dual Zone. Function of the KDC-MP7028/KDC-MP728/KDC- 1 Select the source for adjustment X789/KDC-MP628 Press the [SRC] button. Speaker Setting 2 Enter Audio Setup mode Fine-tuning so that the System Q value is optimal Press the [VOL] knob for at least 1 second. when setting the speaker type. 3 Select the Audio Setup item for adjustme

Resumo do conteúdo contido na página número 14

General features Subwoofer Output 4 Select the Sound Field Control item for adjustment Turning the Subwoofer output ON or OFF. Press the [1] — [3] and [5] button. Hold down on [AM] of the Control knob for at Each time the [1] — [3] and [5] button is pressed, least 1 second. the adjustable audio items are switched among Each time the button is pressed, Subwoofer ranges of all stage section’s tables on the output switches ON and OFF. following pages. When it’s ON, "SW ON" is displayed. Multi

Resumo do conteúdo contido na página número 15

5 Adjust the Sound Field Control item 2 Select the key function section Push the Control knob to [4] or [¢]. Press the [NEXT] button. Each time the knob is pushed, the setting Repeatedly press the button until "S.M.S" is switches as shown below. displayed above the [2] button. Refer to Sound Field Control Item Range (page 9). Front High Pass Filter Center/ Rear High Pass Filter Center 3 Enter Sound Management mode (KDC-X889) Through/30 — 100/120/150/ Press

Resumo do conteúdo contido na página número 16

General features Equalizer Control 1 Select the source for adjustment • User memory: Press the [SRC] button. The values set on the

Resumo do conteúdo contido na página número 17

• TruBass: Assisting the playback for the super bass Function of the KDC-X889/KDC-MP828 sound. WOW Control • SRS 3D: Making a natural 3D sound field. • SRS 3D cannot be set in tuner source. 1 Select the source for adjustment Press the [SRC] button. 6 Exit WOW Control mode Press the [6] ("RTN") button. 2 Select the key function section Press the [NEXT] button. Repeatedly press the button until "WOW" is • T o get the best sound, first set the Speaker select. displayed above the [4] button. Re

Resumo do conteúdo contido na página número 18

General features Function of the KDC-X889/KDC-MP828 4 Enter recall mode Memory mode Press the [1]("CALL") button. 5 Select the recall item The values of Field Control can be stored in Press the [1]("CALL1")/[2]("CALL2") button for memory. at least 2 seconds. 1 Adjust the item you wish to put in memory "CALL1": Recall the value put in "MEM.1" by By referring to (page 14), (page 18). (page 15), and "CALL2": Recall the value put i

Resumo do conteúdo contido na página número 19

7 Select the characters Push the Control knob to [FM] or [AM]. • The faceplat e is a precision piece of equipment and can be damaged by shocks or jolts. For that reason, • Characters can be entered by using a remote with a keep the faceplate in its special storage case while numbers buttons. detached. Example: If "DANCE" is entered. • Do not expose the faceplate or its storage case to direct sunlight or excessive heat or humidity. Also Character Button Times pressed avoid places with too

Resumo do conteúdo contido na página número 20

General features Display Mode Switching Switching the display mode. • * Function of the KDC-X889/MP828/MP7028/MP728/ X789 1 Select the key function section 5 Exit display control mode Press the [NEXT] button. Press the [6] ("RTN") button. Repeatedly press the button until "DISP" is displayed above the [6] (KDC-X889/MP828)/[2] (KDC-MP7028/MP728/X789/MP628) button. • Under the display type other than "Display Type D", Refer to the function item is not displ