Resumo do conteúdo contido na página número 1
ATT
CD RECEIVER KD-SX950
RECEPTOR CON CD KD-SX950
RECEPTEUR CD KD-SX950
45 CD CHANGER CONTROL
MO
SCM
RND
SSM
DISP
RPT
SCAN
INT
789 10 11 12
CD-CH FM/AM CD
BBE
For installation and connections, refer to the separate manual.
Para la instalación y las conexiones, refiérase al manual separado.
Pour l’installation et les raccordements, se référer au manuel séparé.
For customer Use:
Enter below the Model No. and
Serial No. which are located on
the top or bottom of the cabinet.
INSTRUCTIONS
Retain th
Resumo do conteúdo contido na página número 2
INFORMATION (For USA) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarante
Resumo do conteúdo contido na página número 3
Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. CONTENTS How to reset your unit .................................................................... 2 BASIC OPERATIONS ....................................................5 RADIO OPERATIONS ...................................................6 Listening to the radio .......................................
Resumo do conteúdo contido na página número 4
REMOTE OPERATIONS...............................................31 Installing the battery .................................................................... 31 Using the remote controller ......................................................... 32 CD CHANGER OPERATIONS ......................................33 Playing CDs ................................................................................... 33 Selecting CD playback modes...................................................... 35 EX
Resumo do conteúdo contido na página número 5
ATT BASIC OPERATIONS 1 Note: When you use this unit for the first time, set the built-in clock correctly, see page 21. 3 2 1 Turn on the power. “HELLO” appears on the display. Note on One-Touch Operation: When you select a source in step 2 below, the power automatically comes on. You do not have to press this button to turn on the power. 2 Select the source. To operate the tuner, see pages 6 – 10. FM/AM CD CD-CH To operate the CD player, see pages 11 – 15. To operate the CD changer, see pages 33
Resumo do conteúdo contido na página número 6
RADIO OPERATIONS Listening to the radio 2 1 1 Select the band (FM1, FM2, FM3 or AM). FM/AM You can select any one of FM1, FM2, and FM3 to listen to an FM station. FM1 FM2 FM3 AM Audio (see page 25) or Selected band (or clock time: see page 24) volume level indicator. appears. 2 To search stations Start searching a station. of higher While searching stations, “SEEK” appears on frequencies. the display. When a station is received, searching stops. To search stations of lower frequencies. To stop s
Resumo do conteúdo contido na página número 7
Storing stations in memory You can use one of the following two methods to store broadcasting stations in memory. • Automatic preset of FM stations: SSM (Strong-station Sequential Memory) • Manual preset of both FM and AM stations FM station automatic preset: SSM You can preset 6 local FM stations in each FM band (FM1, FM2 and FM3). 2 1 1 Select the FM band number (FM1, FM2 or FM/AM FM3) you want to store FM stations into. FM1 FM2 FM3 AM 2 Press and hold both buttons for more than 2 seconds. SSM
Resumo do conteúdo contido na página número 8
Manual preset You can preset up to 6 stations in each band (FM1, FM2, FM3 and AM) manually. EXAMPLE: Storing an FM station of 88.3 MHz into the preset number 1 of the FM1 band 2 3 1 1 Select the FM1 band. FM/AM 2 Tune into a station of 88.3 MHz. See page 6 to tune into a station. 3 Press and hold the number button (in this example, 1) for more than 2 seconds. Preset number flashes Selected band and “MEMO” flash alternately for a while. 4 Repeat the above procedure to store other stations into ot
Resumo do conteúdo contido na página número 9
Tuning into a preset station You can easily tune into a preset station. Remember that you must store stations first. If you have not stored them yet, see pages 7 and 8. 2 1 1 Select the band (FM1, FM2, FM3 or AM) you want. FM/AM FM1 FM2 FM3 AM 2 Select the number (1 – 6) for the preset station you want. 9 EN06-10.KD-SX950[J]/F 9 99.12.13, 1:11 PM ENGLISH
Resumo do conteúdo contido na página número 10
Other convenient tuner functions MO/RND RPT/SCAN Scanning broadcast stations When you press RPT/SCAN (Repeat/Scan) while listening to the radio, station scanning starts. Each time a broadcast is tuned in, scanning stops for about 5 seconds (“SCAN” flashes on the display), and you can check what program is now being broadcast. If you want to listen to that program, press the same button again to stop scanning. Selecting FM reception sound When an FM stereo broadcast is hard to receive: Press MO/R
Resumo do conteúdo contido na página número 11
CD OPERATIONS Playing a CD 1 1 Open the control panel. 2 1. Insert a disc into the loading slot. The unit turns on, draws a CD and starts playback automatically. 2. Close the control panel by hand. Total playing time of Total track number Elapsed the inserted disc of the inserted disc playing time Current track Lights up Notes: • When a CD is inserted up side down, “PLEASE” and “EJECT” appear on the display alternately. When you open the control panel by pressing 0, the CD automatically ejects.
Resumo do conteúdo contido na página número 12
Locating a track or a particular portion on a CD ¢ 4 Number buttons To fast-forward or reverse the track Press and hold ¢, while playing a CD, to fast-forward the track. Press and hold 4 , while playing a CD, to reverse the track. To go to the next tracks or the previous tracks Press ¢ briefly, while playing a CD, to go ahead to the beginning of the next track. Each time you press the button consecutively, the beginning of the next tracks is located and played back. Press 4 briefly, wh
Resumo do conteúdo contido na página número 13
Selecting CD playback modes MO/RND RPT/SCAN To play back tracks at random (Random Play) You can play back all tracks on the CD at random. MO Each time you press MO/RND (Mono/Random) while playing a CD, CD RND random play mode turns on and off alternately. When the random mode is turned on, the RND indicator lights up on the display and a track randomly selected starts playing. To play back tracks repeatedly (Repeat Play) You can play back the current track repeatedly. Each time you press RPT/SCA
Resumo do conteúdo contido na página número 14
INT To play back only intros (Intro Scan) Each time you press INT (Intro) briefly while playing a CD, CD intro scan INT mode turns on and off alternately. When the intro scan mode is turned on, “INT” appears on the display for 5 seconds and the track number flashes. The first 15 seconds of each track are played sequentially. Track number of the currently playing track 14 EN11-15.KD-SX950[J]/F 14 99.12.13, 1:12 PM ENGLISH
Resumo do conteúdo contido na página número 15
Playing a CD Text In a CD Text, some information about the disc (its disc title, performer and track title) is recorded. You can show these disc information on the display. DISP DISP Select text display mode while playing a CD Text. Each time you press the button, the display changes as follows: Disc Title / Performer Track Title Current track and Elapsed playing time Notes: • The display shows up to 8 characters at one time and scrolls if there are more than 8 characters. See also “Selecting th
Resumo do conteúdo contido na página número 16
SOUND ADJUSTMENTS Adjusting the sound You can adjust the sound characteristics to your preference. 2 Equalization pattern indicator 1 1 Select the item you want to adjust. Indication To do: Range BAS Adjust the bass –06 (min.) — +06 (max.) (Bass) TRE Adjust the treble –06 (min.) — +06 (max.) (Treble) FAD Adjust the front and rear speaker R06 (rear only) — F06 (front only) (Fader)* balance BAL Adjust the left and right speaker L06 (left only) — R06 (right only) (Balance) balance WOOFER Adjust t
Resumo do conteúdo contido na página número 17
II Turning on/off the BBE function II The BBE * function restores the brilliance and clarity of the original live sound in recording, broadcasts, etc. When a speaker reproduces sound, it introduces frequency-dependent phase shifting, causing II high-frequency sounds to take longer to reach the ear than low frequency sounds. The BBE function adjusts the phase relationship between the low, mid and high frequencies by adding a progressively longer delay time to the low and mid frequencies, so that
Resumo do conteúdo contido na página número 18
Using the Sound Control Memory You can select and store a preset sound adjustment suitable to each playback source. (Advanced SCM) Selecting and storing the sound modes Once you select a sound mode, it is stored in memory, and will be recalled every time you select the same source. A sound mode can be stored for each of the following sources — FM1, FM2, FM3, AM, CD and external components. • If you do not want to store the sound mode separately for each playback source, but want to use the same
Resumo do conteúdo contido na página número 19
Recalling the sound modes Source buttons Select the source while the “Link” indicator is CD-CH FM/AM CD lit on the display. The “Link” indicator starts flashing, and the sound mode stored in memory for the selected source is recalled. Sound mode indicator Equalization pattern of the selected sound mode appears. Notes: • You can adjust each sound mode to your preference, and store it in memory. If you want to adjust and store your original sound mode, see “Storing your own sound adjustments” on p
Resumo do conteúdo contido na página número 20
Storing your own sound adjustments You can adjust the sound modes (BEAT, SOFT, POP: see page 18) to your preference and store your own adjustments in memory. 1,3 2 2 2 1 SCM Call up the sound mode you want to adjust. See page 18 for details. Within 5 seconds 2 1 2 To adjust the bass or treble level 1 Select “BAS” or “TRE.” Within 5 seconds 2 Adjust the bass or treble level. II To turn on or off the BBE function BBE See page 17. Within 5 seconds 3 Press and hold SCM (Sound Control Memory) SCM unt
