Resumo do conteúdo contido na página número 1
ENGLISH
ESPAÑOL
FRANÇAIS
KD-HDR44
CD RECEIVER / RECEPTOR CON CD /
RÉCEPTEUR CD
Having TROUBLE with operation?
Please reset your unit
Refer to page of How to reset your unit
Still having trouble??
USA ONLY
Call 1-800-252-5722
http://www.jvc.com
We can help you!
For canceling the display demonstration, see page 4. / Para
cancelar la demostración en pantalla, consulte la página 4. / Pour
HD Radio Technology manufactured under license from iBiquity Digital Corporation. U.S. and
annuler la démons
Resumo do conteúdo contido na página número 2
Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. INFORMATION (For U.S.A.) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates
Resumo do conteúdo contido na página número 3
How to attach/detach the control CONTENTS panel 3 How to attach/detach the control panel 3 How to reset your unit 3 How to forcibly eject a disc 3 Maintenance 4 Canceling the display demonstration How to reset your unit 4 Setting the clock Your preset adjustments will 5 Preparing the remote controller also be erased. 5 About discs 6 Basic operations 7 Listening to the radio 9 Listening to a disc How to forcibly eject a disc 10 Connecting the other external [Hold] components 11 Listeni
Resumo do conteúdo contido na página número 4
Canceling the display demonstration Display demonstration will be activated automatically if no operation is done for about 20 seconds. 1 Turn on the power. 4 Select . [Hold] 2 5 [Hold] (Initial setting) 3 6 Finish the procedure. (Initial setting) Setting the clock 1 Turn on the power. [Hold] 2 [Hold] (Initial setting) 3 Select . 4 Select . 5 Adjust the hour. (Initial setting) 6 Adjust the minute. 7 Finish the procedure. 4 ENGLISH EN02-17_KD-HDR44[J]_f
Resumo do conteúdo contido na página número 5
Preparing the remote controller When you use the remote controller for the first Caution: time, pull out the insulation sheet. • Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. • Battery shall not be exposed to excessive heat Insulation sheet such as sunshine, fire, or the like. For USA-California Only: This product contains a CR Coin Cell Lithium Warning (to prevent accidents and Battery which contains Perchlorate Material— damage): s
Resumo do conteúdo contido na página número 6
Basic operations Loading slot Control dial Display window Ejects the disc Remote sensor Front auxiliary input jack • DO NOT expose to bright sunlight. Detaches the panel When you press or hold the following button(s)... Remote Main unit General operation controller — Turns on/off [Hold]. Selects the sources (FM, CD, F-AUX, BT AUDIO or R-AUX or / SOURCE SOURCE BT PHONE, AM). • “CD” is selectable only when a disc is loaded. Control dial VOL – / + Adjusts the volume level. (turn) — Selects item
Resumo do conteúdo contido na página número 7
Listening to the radio You can tune in to both conventional and HD Radio broadcasts. What is HD Radio™ broadcasting? HD Radio stations can deliver high-quality digital sound—AM digital will have FM-like sound quality (in stereo) and FM digital will have CD-like sound quality—with static-free and clear reception. Furthermore, stations can offer text and data, such as artist names and song titles. • HD Radio tuners can also tune in to conventional analog broadcasts. • Many HD Radio stations offe
Resumo do conteúdo contido na página número 8
Improving the FM reception Automatic presetting (FM/AM) —SSM (Strong-station Sequential Memory) 1 [Hold] You can preset up to 18 stations for FM and 6 stations for AM. • HD Radio multicast channels can also be preset. 2 While listening to a station/channel... ] ] ] 1 [Hold] Reception improves, but stereo effect will be lost. 2 To restore the stereo effect, repeat the same procedure to select . FM: ] ] ] Changing the HD Radio
Resumo do conteúdo contido na página número 9
Using the remote controller Selecting a preset station/channel 5 / ∞ : [Press] Changes the preset stations/ channels. 1 [Hold] Searches for HD Radio stations only. or 2 / 3 : [Press] Searches for stations 2 automatically. [Hold] Searches for stations manually. • Pressing the number buttons (1 – 6) can also select the preset stations/channels (1 – 6). Listening to a disc Playback starts automatically. All tracks will be played repeatedly until you change the source or eject the disc. Chan
Resumo do conteúdo contido na página número 10
Selecting the playback modes 3 You can use only one of the following playback modes at a time. REPEAT 1 TRACK RPT : Repeats current track [Hold] FOLDER RPT : Repeats current folder RANDOM • Pressing number button 1 (RPT) or FOLDER RND : Randomly plays all tracks 2 (RND) can enter REPEAT/RANDOM of current folder, then setting directly. Then, perform step 3. tracks of next folders 2 ALL RND : Randomly plays all tracks To cancel repeat play or random play, select “RPT OFF” or “RND OFF.” ] “
Resumo do conteúdo contido na página número 11
Recommended to use a 3-terminal plug head stereo mini plug for optimum audio output. Listening to the other external components For details, refer also to the instructions supplied with the external components. Turn on the connected component and ~ Ÿ start playing the source. ] “F-AUX” or “R-AUX” Selecting a preset sound mode You can select a preset sound mode suitable 2 for the music genre. FLAT = NATURAL = DYNAMIC = VOCAL BOOST = ] ]
Resumo do conteúdo contido na página número 12
Menu operations Repeat step 2 if necessary. 1 2 3 [Hold] • To return to the previous menu, press BACK. If no operation is done • To exit from the menu, press for about 60 seconds, the MENU. operation will be canceled. Menu item Selectable setting, [Initial: Underlined] DEMO For settings, see page 4. CLOCK DIMMER SET AUTO : Changes the display and button illumination between the Day/Night adjustments 1 in setting when you turn off/on the car headlights * . / ON : Selects the Ni
Resumo do conteúdo contido na página número 13
Menu item Selectable setting, [Initial: Underlined] L/O MODE SUB.W : Selects if the REAR/SW terminals are used for connecting a subwoofer (through an external amplifier). / REAR : Selects if the REAR/SW terminals are used for connecting the speakers (through an external amplifier). 5 SUB.W LPF * LOW 55Hz / LOW 85Hz / LOW 120Hz : Frequencies lower than 55 Hz/85 Hz/120 Hz are sent to the subwoofer. 5 SUB.W LEVEL * 00 — 08 [ 04 ] : Adjusts the subwoofer output level. HPF ON : Activates the High
Resumo do conteúdo contido na página número 14
Troubleshooting Symptom Remedy/Cause Sound cannot be heard from the speakers. Adjust the volume to the optimum level. / Make sure the unit is not muted/paused. (page 6) / Check the cords and connections. “MISWIRING CHK WIRING THEN RESET Check to be sure the terminals of the speaker leads are covered UNIT” / “WARNING CHK WIRING THEN with insulating tape properly, then reset the unit. (page 3) RESET UNIT” appears on the display and no If the message does not disappear, consult your JVC car audio
Resumo do conteúdo contido na página número 15
Symptom Remedy/Cause Disc sound is sometimes interrupted. Stop playback while driving on rough roads. / Change the disc. / Check the cords and connections. “NO DISC” appears on the display. Insert a playable disc into the loading slot. “PLEASE” and “EJECT“ appear alternately Press 0, then insert a disc correctly. on the display. “IN DISC” appears on the display. The disc cannot be ejected properly. Make sure nothing is blocking the loading slot. Disc cannot be played back. • Use a disc with MP
Resumo do conteúdo contido na página número 16
Using Bluetooth ® devices For Bluetooth operations, it is required to connect the Bluetooth adapter, KS-BTA100 (not supplied) to the auxiliary input jack (R-AUX/BT ADAPTER) on the rear of the unit. (page 10) • For details, refer also to the instructions supplied with the Bluetooth adapter and the Bluetooth device. • Operations may be different according to the connected device. Preparation 1 Register (pair) a Bluetooth device with KS-BTA100. Refer to the instructions manual supplied with KS-B
Resumo do conteúdo contido na página número 17
Specifications AUDIO AMPLIFIER SECTION CD PLAYER SECTION Type : Compact disc player Signal Detection System : Non-contact optical pickup (semiconductor laser) Number of Channels : 2 channels (stereo) Power Output : 20 W RMS × 4 Channels at 4 Ω Frequency Response : 5 Hz to 20 000 Hz and ≤ 1% THD+N Signal-to-Noise Ratio : 98 dB Signal-to-Noise Ratio : 80 dBA (reference: 1 W Wow and Flutter : Less than measurable limit into 4 Ω) MP3 Decoding Format (MPEG1/2 Audio Load Impedance : 4 Ω (4 Ω to 8
Resumo do conteúdo contido na página número 18
Muchas gracias por la compra de un producto JVC. Como primer paso, por favor lea detenidamente este manual para comprender a fondo todas las instrucciones y obtener un máximo disfrute de esta unidad. IMPORTANTE (EE.UU.) Este equipo se ha sometido a todo tipo de pruebas y cumple con las normas establecidas para dispositivos de Clase B, de conformidad con la Parte 15 de las reglas de la FCC (Comisión Federal de Comunicaciones). Estas reglas están diseñadas para asegurar una protección razonable
Resumo do conteúdo contido na página número 19
Cómo montar/desmontar el CONTENIDO panel de control 3 Cómo montar/desmontar el panel de control 3 Cómo reposicionar su unidad 3 Cómo expulsar el disco por la fuerza 3 Mantenimiento 4 Cancelación de las demostraciones en pantalla Cómo reposicionar su unidad 4 Puesta en hora del reloj También se borrarán los 5 Preparación del control remoto ajustes preestablecidos por 5 Acerca de los discos usted. 6 Operaciones básicas 7 Para escuchar la radio Cómo expulsar el disco por la 9 Escuchando u
Resumo do conteúdo contido na página número 20
Cancelación de las demostraciones en pantalla La demostración en pantalla se activará automáticamente si no se efectúa ninguna operación durante unos 20 segundos. 1 Encienda la unidad. 4 Seleccione . [Sostener] 2 [Sostener] 5 (Configuración inicial) 3 6 Finalice el procedimiento. (Configuración inicial) Puesta en hora del reloj 1 Encienda la unidad. [Sostener] 2 [Sostener] (Configuración inicial) 3 Seleccione . 4 Seleccione . 5 Ajuste la hora. (Configurac
