Resumo do conteúdo contido na página número 1
XDMA6700
INSTALLATION/OWNER'S MANUAL
® ®
AM/FM/CD/MP3/WMA/iPod /Bluetooth Ready Receiver with Detachable Face
Resumo do conteúdo contido na página número 2
XDMA6700 INSTALLATION Preparation Please read entire manual before installation. Before You Start • Disconnect negative battery terminal. Consult a qualified technician for instructions. • Avoid installing the unit where it would be subject to high temperatures, such as from direct sunlight, or where it would be subject to dust, dirt or excessive vibration. Getting Started • Remove trim ring from unit, • Remove transit screws located on top of the unit. • Insert the supplied keys i
Resumo do conteúdo contido na página número 3
XDMA6700 INSTALLATION Wiring Diagram BLACK 8-pin Female Mini-DIN Yellow BTM60 Connection (sold separately) Auxiliary Input WHITE 10-pin Female Mini-DIN IPC2M Connection (sold separately) Antenna Connector BLACK Front Preamp Output FUSE When replacing the fuse, make sure new fuse is the correct type and amperage. Using an incorrect fuse could damage the radio. The XDMA6700 uses one 10 amp ATM fuse located beside the wiring connector. 3
Resumo do conteúdo contido na página número 4
XDMA6700 OPERATION Control Locations - Receiver 1 2 3 4 5 6 7 8 9 10 11 21 20 19 18 17 16 15 14 13 12 Release EQ/Key 9 1 12 Band/Play/Pause/Key * Mute/End Call 2 13 Volume/Audio/Setup Display/Key 0 3 14 Mode/Search Tuner Scan/Key 8 4 15 Preset /Menu Call/Redial 5 16 6 Preset 1/Repeat 17 Return/Key 7 7 Preset 5/Folder Down 18 Auto Store/Preset Scan/Enter/Key # 8 Preset /Random 19 Power 9 Preset 3/Intro 20 Tune/Track Down 10 Eject 21 Tune/Track Up 11 Preset 6/Folder Up The XDMA6700 allows
Resumo do conteúdo contido na página número 5
XDMA6700 OPERATION General Operation Faceplate Removal Press RELEASE and pull away from the left side to remove. To re-install, insert right side of faceplate first then push left side to secure. Semi-Permanent Remove trim ring, and install supplied #1 x 7/3” Phillips Faceplate Installation head screw through left side of mounting frame into faceplate. Power On/Off Press POWER or any other button (except eject) to turn the unit on. Inserting a disc will turn the unit on automatically
Resumo do conteúdo contido na página número 6
XDMA6700 OPERATION General Operation Display Press DISP to select between clock and different types of information, such as radio frequency, CD track/elapsed time, or MP3/WMA/iPod song information. Set the Clock With the unit on, press and hold DISP until the clock begins to flash, then release. Press TUNE to adjust the hours and nn TUNE to adjust the minutes. Press DISP momentarily to ll save the selected time. 12/24-hour Clock The clock will display 1-hour AM/PM time in USA freq
Resumo do conteúdo contido na página número 7
XDMA6700 OPERATION General Operation - Setup Menu Menu Function Options Action Loudness Curve LOUD OFF Disables the loudness function. LOUD ON Enables the loudness function. Activating this feature will enhance the bass and treble frequencies when listening to music at low volumes. Tuner Frequency FREQ USA Programs the unit to USA tuner spacing. Spacing (00kHz for FM and 10kHz for AM) FREQ EUR Programs the unit to European tuner spacing. (50kHz for FM and 9kHz for AM) Clock Displ
Resumo do conteúdo contido na página número 8
XDMA6700 OPERATION General Operation Audio Press rotary encoder momentarily to select between Volume (default), Bass, Treble, Balance and Fader. VOLUME BASS TREBLE BALANCE FADER Bass Press rotary encoder until BAS appears then rotate encoder left/right to adjust ( -6 minimum / +6 maximum). Treble Press rotary encoder until TRE appears then rotate encoder left/right to adjust ( -6 minimum / +6 maximum). Balance Press rotary encoder until BAL appears then rotate encoder left/right to adjus
Resumo do conteúdo contido na página número 9
XDMA6700 OPERATION AM/FM Tuner Operation Seek Tuning Press TUNE or TUNE momentarily to seek the nn ll next strong station. Manual Tuning Press TUNE or TUNE for more than two seconds, nn ll then release. "MANUAL" will momentarily appear in the display. Press TUNE or TUNE momentarily to nn ll move radio frequency up or down one step at a time. Press and hold to advance quickly. If tuning is not adjusted for five seconds, the unit will return to seek tuning mode (default). "AUT
Resumo do conteúdo contido na página número 10
XDMA6700 OPERATION CD Player Operation Insert CD With the label facing up, insert a standard size CD into the CD slot. The CD will automatically begin playback. Eject CD Press EJECT to eject the CD. The unit will change to previous mode of operation (AM, FM, auxiliary input, iPod or Bluetooth). If the disc is not removed within 10 seconds, the unit will reload the disc. The unit does not have to be turned on to eject CD. Track Select Press TRACK to skip to the beginning of the next
Resumo do conteúdo contido na página número 11
XDMA6700 OPERATION CD Player Operation - MP3/WMA Files Playing an MP3/WMA Disc When an MP3/WMA encoded disc is first inserted, “READING” will appear in the display. Depending on the number of files and folders, this may take several seconds. Displaying Information Press DISP to select between track number/elapsed time (default), clock, track name, directory name, title, artist and album. “NO ID3 TAG” will be displayed if the MP3 file contains no ID3 tag information. “UNKNOWN
Resumo do conteúdo contido na página número 12
XDMA6700 OPERATION CD Player Operation - MP3/WMA Files Refer to the following button function table when selecting, searching or navigating MP3/WMA files and folders: MP3/WMA Button Function Table Button Function SRCH Direct Select, Search and Navigate Modes Enter/Confirm Preset #1 A, B, C, 1 Preset # D, E, F, Preset #3 G, H, I, 3 Preset # J, K, L, Preset #5 M, N, O, 5 Preset #6 P, Q, R, 6 Key #7 S, T, U, 7 Key #8 V, W, X, 8 Key #9 Y, Z, /, 9 Key #0 -, _, +, 0 Rotary Encoder (pu
Resumo do conteúdo contido na página número 13
XDMA6700 OPERATION CD Player Operation - MP3/WMA Files Alphanumeric File Press SRCH for more than 3 seconds, then release. or Folder Search Press SRCH again, an " " will flash in the display. * Step 1 Use the buttons in the table on page 1 (3 character maximum input) or the rotary encoder to enter the desired alphanumeric search characters. Press MUTE to advance one character to the right. Step 2 Press to initiate the selected alphanumeric search. Step 3 Turn the rot
Resumo do conteúdo contido na página número 14
XDMA6700 OPERATION CD Player Operation - MP3/WMA Files Navigating Note After navigating by direct select, alphanumeric search or file/folder navigate modes, the track number and elapsed time will be displayed by default. Press DISP momentarily to select clock, track name, directory name, title, artist and album. *Folder Access Press to select the previous folder. Press to select the next folder. *Folder access is only available on MP3/WMA discs recorded with more tha
Resumo do conteúdo contido na página número 15
XDMA6700 OPERATION CD Player Operation - MP3/WMA Files Media Compatibility The following types of discs/files are compatible: • CD-ROM (ISO), CD-R, CD-RW • CD-DA • MP3 data • WMA data The following types of discs/files are not compatible: • WMA files that are protected by DRM (Digital Rights Management). • WMA lossless format • Discs recorded with Track At Once or packet writing • MP3 PRO format • MP3 playlists • WAV format Playback Order MP3/WMA playback sequence is based on reco
Resumo do conteúdo contido na página número 16
XDMA6700 OPERATION CD Player Operation - MP3/WMA Files Additional MP3/WMA An internal buffer provides ESP (Electronic Skip Protection) to Information virtually eliminate skipping. When playing a disc recorded with regular audio files (CD-DA or .WAV) and MP3/WMA files, the unit will play the MP3/WMA files only. Only MP3 files with filename extension (.mp3) can be played. Only WMA files with filename extension (.wma) can be played. Do not attempt to play discs which contain non-MP3/WM
Resumo do conteúdo contido na página número 17
XDMA6700 OPERATION ® iPod Operation (Optional) Connect iPod Connecting an iPod requires the IPC2M cable (sold seperately). (Not Included) Once connected, press MODE until "IPOD" appears in the display. The iPod will automatically begin playback. If a song is playing on the iPod before it is connected, it will continue to play. Displaying Information Press DISP to select between elapsed time (default), track number, clock, title, artist and album. “UNKNOWN ARTIST” will be displayed
Resumo do conteúdo contido na página número 18
XDMA6700 OPERATION ® iPod Operation (Optional) Press and hold or to fast forward or reverse a Fast Forward ll nn and Reverse song. Pause Press / II to temporarily stop playback. l Press / II again to resume playback. l Intro Press INT to play the first 10 seconds of each song. Press INT again to cancel. Repeat Press RPT to continuously repeat selected song. Press RPT again to cancel. It is not possible to select songs in repeat mode. Random Pr
Resumo do conteúdo contido na página número 19
XDMA6700 OPERATION ® Bluetooth Operation (Optional) Overview Connecting a Bluetooth device requires first connecting the Dual BTM60 module (sold separately). When connected to a Dual Bluetooth Ready head unit, the BTM60 supports the HFP (hands-free profile), ADP (advanced audio distribution profile) and AVRCP (audio video remote control profile). Preparation Before you can use a mobile device with this head unit, it must be connected and authenticated - commonly referred to as "pairing
Resumo do conteúdo contido na página número 20
XDMA6700 OPERATION ® Bluetooth Operation (Optional) Description Function Press once. An "_" will appear on the display. Input the desired phone number using the 0-9, *, # buttons on the Making a Phone Call head unit front panel. Press to begin dialing. A phone call may also be placed from your mobile device using the keypad, phone book or speed dial. To enter last number dialing mode, press , then press a second time. The head unit will display "Last Number Dialing." Press KEY 0 to
