Resumo do conteúdo contido na página número 1
3-865-683-11(1)
FM/AM Cassette
Car Stereo
US
Operating Instructions
Owner’s Record
The model and serial numbers are located on the bottom of the unit.
Record the serial number in the space provided below.
Refer to these numbers whenever you call upon your Sony dealer regarding this
product.
Model No. XR-C7220 Serial No.
For installation and connections, see the supplied installation/connections
manual.
XR-C7220
1999 by Sony Corporation
Resumo do conteúdo contido na página número 2
Warning Welcome ! This equipment has been tested and found to Thank you for purchasing this Sony Cassette comply with the limits for a Class B digital Player. This unit lets you enjoy a variety of device, pursuant to Part 15 of the FCC Rules. features as well as an optional rotary These limits are designed to provide commander or an optional wireless remote. reasonable protection against harmful interference in a residential installation. This In addition to the cassette playback and radio equip
Resumo do conteúdo contido na página número 3
Table of Contents This Unit Only With Optional Equipment Location of controls ............................................ 4 CD/MD Unit Playing a CD or MD ......................................... 16 Getting Started Playing tracks repeatedly — Repeat Play .............................................. 17 Resetting the unit ................................................ 6 Playing tracks in random order Detaching the front panel .................................. 6 — Shuffle Play ...............
Resumo do conteúdo contido na página número 4
Location of controls OPEN + – PRESET SOUND DISC MODE 6 D-BASS LIST DSPL 1 OFF 2 3 SOURCE g SHIFT SET UP PLAY MODE ENTER SEEK / AMS OFF 1 2 3 4 5 6 XR-C7220 Refer to the pages listed for details. 1 SEEK/AMS (seek/Automatic Music 8 PRESET/DISC button Sensor/manual search) control During radio reception: 8, 10, 17, 20, 21 Preset stations select 10 2 MODE (*) button During CD/MD playback: During tape playback: Disc change 17 Playback direction change 8 9 DSPL (display mode change) button During ra
Resumo do conteúdo contido na página número 5
Optional wireless remote (RM-X47) OFF MODE SOURCE DIR SEEK AMS – PRESET + REW DISC FF – SOUND SEL ATT DSPL The corresponding buttons of the wireless remote control the same functions as those on this unit. 1 OFF button 6 DSPL button 2 SEEK/AMS button 7 PRESET/DISC button You cannot perform manual search and 3 (Ð) (+) buttons manual tuning with the remote. 4 ATT button 8 SOURCE button 5 SOUND/SEL button 9 MODE/DIR button When the POWER SELECT switch is set to the B position, the unit cannot be op
Resumo do conteúdo contido na página número 6
Attaching the front panel Place the hole a in the front panel onto the spindle b on the unit as illustrated, then push Getting Started the left side in. Resetting the unit a Before operating the unit for the first time or b after replacing the car battery, you must reset the unit. Remove the front panel and press the reset button with a pointed object, such as a ball- point pen. Reset button μ Note Pressing the reset button will erase the clock setting and some memorized functions. Detaching the
Resumo do conteúdo contido na página número 7
2 Press (SHIFT). Setting the clock The clock uses a 12-hour digital indication. The clock starts. Example: To set the clock to 10:08 1 Press (SHIFT), then press (2) (SET UP) 3 Press (SHIFT). repeatedly until “CLOCK” appears. After the clock setting is complete, the display returns to normal playback mode. Note If the POWER SELECT switch on the bottom of the unit is set to the B position, turn the power on 1 Press (4) (n). first, then set the clock. The hour indication flashes. 2 Set the hour. t
Resumo do conteúdo contido na página número 8
Fast-winding the tape During playback, push the SEEK/AMS Cassette Player control up or down and hold. Fast-forward Listening to a tape Rewind SEEK / AMS 1 Press (OPEN) and insert a cassette. To start playback during fast-forwarding or Playback starts automatically. rewinding, press (MODE) (*). 6 Locating a specific track — Automatic Music Sensor (AMS) During playback, push the SEEK/AMS control up or down and release for each track you want to skip. You can skip up to nine tracks at one time. 2 C
Resumo do conteúdo contido na página número 9
Playing a tape in various Radio modes You can play the tape in various modes: •REP (Repeat Play) repeats the current track. •NR (Dolby NR) lets you select the Dolby* NR Memorizing stations B system. •METAL (Metal) lets you play a metal or CrO2 automatically tape. — Best Tuning Memory (BTM) •BL SKP (Blank Skip) skips blanks longer than eight seconds. The unit selects the stations with the strongest •ATA (Automatic Tuner Activation) turns on signals and memorizes them in the order of the tuner aut
Resumo do conteúdo contido na página número 10
If you cannot tune in a preset Memorizing only the station Push and release the SEEK/AMS control desired stations up or down to search for the station You can preset up to 18 FM stations (6 each for (automatic tuning). FM1, 2, and 3) and up to 12 AM stations Scanning stops when the unit receives a (6 each for AM1 and 2) in the order of your station. Push the SEEK/AMS control up or choice. down repeatedly until the desired station is received. 1 Press (SOURCE) repeatedly to select the Note tuner.
Resumo do conteúdo contido na página número 11
2 Press (4) (n) after locating the Changing the display item desired character. Each time you press (DSPL), the item changes The flashing cursor moves to the next as follows: space. Frequency ÷ Clock After you select the desired item, the display will automatically change to the Motion Display mode after a few seconds. In the Motion Display mode, all the above If you press (1) (N), the flashing cursor items are scrolled in the display one by one in moves to the left. order. Tip 3 Repeat steps 1
Resumo do conteúdo contido na página número 12
LIST MODE SOUND Erasing the station name 1 Tune in any station and press (LIST) for Other Functions two seconds. 2 Press (DSPL) for two seconds. You can also control this unit with an optional rotary commander. 3 Rotate the dial to select the name that you want to erase. Labeling the rotary 4 Press (5) (ENTER) for two seconds. The name is erased. commander Repeat steps 3 and 4 if you want to erase other names. Depending on how you mount the rotary commander, attach the appropriate label as shown
Resumo do conteúdo contido na página número 13
By rotating the control Using the rotary (the SEEK/AMS control) commander The rotary commander works by pressing buttons and/or rotating controls. By pressing buttons (the SOURCE and MODE buttons) Rotate the control and release it to: (SOURCE) •Locate the beginnings of tracks on the tape. Rotate and hold the control, and release it to fast-wind the tape. To start playback while fast-winding the tape, press (MODE). (MODE) •Locate a specific track on a disc. Rotate and hold the control until you l
Resumo do conteúdo contido na página número 14
Press (SOUND) to Adjusting the sound adjust the volume and sound menu. characteristics You can adjust the bass, treble, balance, and fader. You can store the bass and treble levels Press (LIST) to: independently for each source. • Display the memorized names. • Display the program type. 1 Select the item you want to adjust by Changing the operative direction pressing (SOUND) repeatedly. The operative direction of controls is factory- VOL (volume) n BAS (bass) n set as shown below. TRE (treble) n
Resumo do conteúdo contido na página número 15
Changing the sound and Boosting the bass sound — D-bass display settings You can enjoy a clear and powerful bass The following items can be set: sound. The D-bass function boosts the low •CLOCK (page 7). frequency signal with a sharper curve than •BEEP – to turn the beep sound on or off. conventional bass boost. •RM (Rotary Commander) – to change the You can hear the bass line more clearly even operative direction of the rotary commander. while the vocal volume remains the same. You — Select “NO
Resumo do conteúdo contido na página número 16
After you select the desired item, the display With Optional Equipment will automatically change to the Motion Display mode after a few seconds. CD/MD Unit In the Motion Display mode, all the above items are scrolled in the display one by one in order. This unit can control a maximum of ten external CD/MD units in this configuration: Tip CD unit – maximum of five The Motion Display mode can be turned off. (See MD unit – maximum of five “Changing the sound and display settings” on Any combination
Resumo do conteúdo contido na página número 17
Locating a specific track — Automatic Music Sensor (AMS) Playing tracks repeatedly — Repeat Play During playback, push the SEEK/AMS control up or down and release for each You can select: track you want to skip. •REP-1 – to repeat a track. •REP-2 – to repeat a disc. To locate succeeding tracks 1 During playback, press (SHIFT), then To locate preceding press (3) (PLAY MODE) repeatedly until tracks “REP” appears. SEEK / AMS 2 Press (4) (n) repeatedly until the Locating a specific point in a track
Resumo do conteúdo contido na página número 18
Displaying the disc memo name Labeling a CD — Disc Memo Press (DSPL) during CD or CD TEXT disc (For a CD unit with the custom file function) playback. You can label each disc with a personalized name. You can enter up to eight characters for a disc. If you label a CD, you can locate the disc by name (page 19) and select specific Each time you press (DSPL) during CD or tracks for playback (page 20). CD TEXT playback, the item changes as follows: 1 Play the CD and press (LIST) for two $ seconds. E
Resumo do conteúdo contido na página número 19
Erasing the disc memo Locating a disc by name 1 Press (SOURCE) repeatedly to select CD. — List-up (For a CD unit with the custom file function or an MD unit) 2 Press (MODE) repeatedly to select the CD unit. You can use this function for discs that have been assigned a custom name. For more information on disc names, refer to “Labeling a 3 Press (LIST) for two seconds. CD” (page 18). 4 Press (DSPL) for two seconds. 1 Press (LIST). The name assigned to the current disc appears in the display. 5 Ro
Resumo do conteúdo contido na página número 20
Playing specific tracks only Selecting specific tracks You can select: •BANK-ON – to play the tracks with the for playback “PLAY” setting. — Bank •BANK-INV (Inverse) – to play the tracks with the “SKIP” setting. (For a CD unit with the custom file function) If you label the disc, you can set the unit to 1 During playback, press (SHIFT), then skip or play the tracks of your choice. press (3) (PLAY MODE) repeatedly until “BANK” appears. 1 Start playing the disc and press (SHIFT), then press (3) (P
