Resumo do conteúdo contido na página número 15
Þ % % % Þ % Þ EN 15 Index Search Next Function Memory Your recorder automatically marks You can set your recorder's power to go off automatically after £ 2 index codes at the beginning of the tape is fully rewound. Before starting, make sure the each recording. This function gives recorder is in the Stop mode. you quick access to any one of 9 For Automatic Power Off After Tape Rewind . . . index codes in either direction. . . . press REW, then press within 2 seconds. NOTE: Before starting, make
Resumo do conteúdo contido na página número 16
PLAY 3 RECORDING 16 EN TV signals being received by the recorder’s built-in tuner can be recorded onto a video tape. You can “capture” a TV programme using your video recorder. Basic LOAD A CASSETTE Insert a cassette with the record safety tab intact. Recording c The counter is reset to 0:00:00 and the recorder 1 power comes on automatically. Turn on the TV and select the VIDEO channel (or AV mode). CHOOSE A PROGRAMME Press TV PROG +/– or the NUMBER keys to select the channel you wish to record.
Resumo do conteúdo contido na página número 17
3 EN 17 Record One Programme While Watching Another Recording SELECT CHANNEL TO Features WATCH Once recording is in progress, all you need to do is to set the channel controls on the TV for the station you 1 wish to view. c The programme selected with the TV’s channel controls appears on the TV screen while the one selected with the TV PROG buttons is recorded on the tape. Elapsed Recording Time Indication You can check the exact time of a recording. SET COUNTER DISPLAY Press DISPLAY until a cou
Resumo do conteúdo contido na página número 18
% % 3 RECORDING (cont.) 18 EN The B.E.S.T. (Biconditional Equalised Signal Tracking) system checks the condition of the tape in use during recording and playback, and compensates to provide the highest-possible recording and playback pictures. The default setting for both B.E.S.T. Picture recording and playback is “ON”. Preparation System TURN THE RECORDER ON Turn on the TV and select the VIDEO channel (or AV mode). Press . 1 ACCESS MAIN MENU SCREEN Press MENU. 2 ACCESS MODE SET SCREEN Place the
Resumo do conteúdo contido na página número 19
EN 19 Recording Playback The recorder assesses the quality of the tape once you initiate playback. START RECORDING Press and hold RECORD and press PLAY on the remote, or press RECORD on the recorder. START PLAYBACK 1 DURING B.E.S.T. Press PLAY. 1 c The recorder adjusts the playback picture quality based on the quality of the tape in use. B.E.S.T. COMPLETE c B.E.S.T. is active during Auto Tracking. “BEST” appears blinking on the recorder’s display panel. NOTES: c When watching a tape recorded wit
Resumo do conteúdo contido na página número 20
% % % 3 TIMER RECORDING 20 EN The SHOWVIEW timer programming system eliminates the need to input channel, date, start and stop time data when setting the timer record function. Simply key in the SHOWVIEW number for the TV program you wish to record (found in most TV listings) SHOWVIEW and the recorder’s timer is automatically programmed. You have to set "GUIDE PROG" numbers, which are assigned to each station for purposes of SHOWVIEW timer programming, for all Setup the stations stored in your r
Resumo do conteúdo contido na página número 1
T
V
V
O
L
–
OK
3
+
T
V
G
P
O
R
ENGLISH
The default setting of On-Screen Display language for this recorder
CONTENTS
is ENGLISH.
SAFETY FIRST 2
Safety Precautions ...................... 2
VIDEO CASSETTE RECORDER
INSTALLING YOUR NEW RECORDER 3
Basic Connections ..................... 3
INITIAL SETTINGS 4
Video Channel Set ..................... 4
Auto Set Up ............................... 6
HR-J459EE
Select Language ......................... 8
Clock Set ................................... 9
On-Scre
Resumo do conteúdo contido na página número 2
SAFETY FIRST 2 EN Safety Precautions The rating plate and the safety caution are on the rear of the unit. WARNING: DANGEROUS VOLTAGE INSIDE WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. CAUTION IMPORTANT n When you are not using the recorder for a long period of n Please read the various precautions on this page before time, it is recommended that you disconnect the power installing or operating the recorder. cord from the mains outlet. n It should be not
Resumo do conteúdo contido na página número 3
INSTALLING YOUR NEW RECORDER EN 3 It's essential that your video recorder be properly connected. Follow these steps carefully. THESE STEPS MUST BE COM- PLETED BEFORE ANY VIDEO OPERATION CAN BE PER- Basic FORMED. CHECK CONTENTS Connections Make sure the package contains all of the accessories listed in “Specifications” (Z pg. 46). 1 Aerial terminal SITUATE RECORDER RF Cable (provided) Place the recorder on a stable, horizontal surface. 2 CONNECT RECORDER TO TV The connection method you use depend
Resumo do conteúdo contido na página número 4
3 INITIAL SETTINGS 4 EN If you have connected the video recorder to your TV via the provided RF cable only (RF connection) – Go to "With RF Connection" below. Video If you have connected the video recorder to your TV via both the provided RF cable and an AV cable (AV connection) – Go to "With AV Connection" on next Channel Set page. Video Channel (RF Output Channel) is the channel on With RF Connection which your TV receives picture and sound signals from the video recorder through the RF cable.
Resumo do conteúdo contido na página número 5
EN 5 With AV Connection SET VIDEO CHANNEL Set your TV to UHF channel 36. IMPORTANT: c If the two vertical white bars appear clearly on the 3 Before performing the following steps, make sure the screen as shown in the illustration (Z "TEST SIGNAL" recorder's power is off and there is no cassette inserted in on page 4), press OK and then go to step 4. the recorder. c If the two vertical white bars do not appear clearly, press OK and then TV PROG + or – to set the video recorder to a vacant channel
Resumo do conteúdo contido na página número 6
3 INITIAL SETTINGS (cont.) 6 EN The Auto Set Up function simplifies installation by guiding you through the procedures of setting the language, clock and tuner channels — simply follow the on-screen menus that appear when the button is first pressed to power on the recorder Auto Set Up after you plug the mains power cord into a mains outlet. Auto Channel Set IMPORTANT Before starting, make sure of the following: c Don't press any buttons on the recorder or remote that c The TV aerial cable shou
Resumo do conteúdo contido na página número 7
3 EN 7 START AUTO CHANNEL SET Press MENU and the "AUTO SET" screen AUTO SET 6 appears. When Auto Channel Set is completed, PLEASE WAIT "SCAN COMPLETED" appears for about 5 ++ + 0 seconds on the screen, then the normal screen [MENU] : EXIT appears. c The Auto Set Up function scans all the channels that are receivable by your recorder. It then automatically assigns each receivable channels to the TV PROG buttons. It skips non-receivable channels. c As Auto Set Up progresses, the " " mark on the s
Resumo do conteúdo contido na página número 8
3 INITIAL SETTINGS (cont.) 8 EN TURN ON THE RECORDER Press . Select 1 Language ACCESS MAIN MENU SCREEN Turn on the TV and select the VIDEO channel (or AV mode). Press MENU. 2 ACCESS INITIAL SET SCREEN Press PUSH JOG %Þ to MAIN MENU place the pointer next to MODE SET 3 "INITIAL SET", then press AUTO CH SET 123 OK or PUSH JOG . MANUAL CH SET 2 INITIAL SET 45 6 7 89 [5°] = [MENU] : EXIT 4 0 ACCESS LANGUAGE SELECT SCREEN 1 Press PUSH JOG %Þ to INITIAL SET place the pointer next to CLOCK SET 4 "L
Resumo do conteúdo contido na página número 9
3 EN 9 TURN THE RECORDER ON Press . Clock Set 1 Turn on the TV and select the VIDEO channel (or AV mode). ACCESS MAIN MENU SCREEN Press MENU. 2 ACCESS INITIAL SET SCREEN 123 2 Press PUSH JOG %Þ to MAIN MENU 45 6 place the pointer next to MODE SET 3 "INITIAL SET", then press 7 89 AUTO CH SET OK or PUSH JOG . MANUAL CH SET INITIAL SET 4 0 [5°] = [MENU] : EXIT 1 ACCESS CLOCK SET SCREEN Press PUSH JOG %Þ to place the pointer next to "CLOCK SET", then press OK or PUSH JOG . The OK 4 Clock Set
Resumo do conteúdo contido na página número 10
% % 3 INITIAL SETTINGS (cont.) 10 EN You can choose whether or not to have various operational indicators appear on screen, by setting this function ON or OFF. On-Screen TURN ON THE RECORDER Press . Displays 1 ACCESS MAIN MENU Turn on the TV and select the VIDEO channel (or AV mode). SCREEN Press MENU. 2 ACCESS MODE SET SCREEN Place the pointer next to "MODE SET" by pressing PUSH JOG %Þ, then press OK or PUSH JOG . 3 123 2 45 6 ENABLE/DISABLE 7 89 ON-SCREEN DISPLAY 4 0 The default setting is
Resumo do conteúdo contido na página número 11
% % 3 INFORMATION ON COLOUR SYSTEM EN 11 You can play back PAL, NTSC and MESECAM tapes, or record PAL and SECAM* signals on this recorder. Follow the procedure below to select the appropriate colour system. * SECAM signals will be recorded as MESECAM on this recorder; Colour MESECAM is the designation for tapes with SECAM signals that have been recorded on a MESECAM-compatible PAL video cassette recorder. System Set TURN ON THE RECORDER Press . 1 ACCESS MAIN MENU SCREEN 123 Press MENU. 2 45 6 2
Resumo do conteúdo contido na página número 12
FF REW PLAY 3 PLAYBACK 12 EN The easiest, most basic operation possible with your video recorder is tape playback. Already-recorded signals on a video tape are read by your video recorder and displayed on your TV just like a TV programme. Basic LOAD A CASSETTE Playback Make sure the window side is up, the rear label side is facing you and the arrow on the front of the cassette is 1 point toward the recorder. Don’t apply too much Turn on the TV and select the VIDEO channel (or AV mode). pressure
Resumo do conteúdo contido na página número 13
% % % PLAY PLAY 3 EN 13 Variable-Speed Search ACTIVATE VARIABLE-SPEED Playback SEARCH During playback, press PUSH JOG or . Features c The more times you press, the faster the playback 1 picture moves. c To decrease speed, press the button for the opposite direction. To resume normal playback, press PLAY. REW Still Picture/Frame-By-Frame Playback PAUSE DURING PLAYBACK Press PAUSE. If there is vertical jitter, use the TV PROG buttons to correct the picture. 1 ACTIVATE FRAME-BY-FRAME PLAYBACK
Resumo do conteúdo contido na página número 14
PLAY 3 PLAYBACK (cont.) 14 EN Manual Tracking Your video recorder is equipped with automatic tracking control. During playback, you can override this and adjust the tracking manually by pressing the TV PROG buttons. REVIEW 123 2 OVERRIDE AUTOMATIC 45 6 TRACKING 7 89 Press (SP/LP) on the remote to engage manual tracking. 4 0 1 TV PROG ADJUST TRACKING 30 SEC MANUALLY 1 Press TV PROG + or – to adjust tracking. FF REW 2 PAUSE RETURN TO AUTOMATIC TRACKING Press SP/LP ( ) on the remote to re-engage
