Resumo do conteúdo contido na página número 1
3-073-156-A1 (1) GB
Video Cassette
Recorder
Operating Instructions
PAL NTSC
SLV-ED828ME/SG
SLV-ED323ME/SG
© 2002 Sony Corporation
Resumo do conteúdo contido na página número 2
• If the unit is brought directly from a cold WARNING to a warm location, moisture may To prevent fire or shock hazard, do not condense inside the VCR and cause expose the unit to rain or moisture. damage to the video head and tape. When To avoid electrical shock, do not open the you first install the unit, or when you cabinet. Refer servicing to qualified move it from a cold to a warm location, personnel only. wait for about four hours before operating the unit. The mains lead must only be chan
Resumo do conteúdo contido na página número 3
Getting Started Table of Contents Additional Operations Getting Started 45 Playing/searching at various speeds 4 Index to parts and controls 46 Setting the recording duration time 10 Step 1 : Unpacking 47 Checking/changing/cancelling 11 Step 2 : Setting up the remote timer settings commander 49 Recording stereo and bilingual 13 Step 3 : Connecting the VCR programmes (SLV-ED828ME/SG 15 Step 4 : Setting up the VCR with only) the Auto Set Up function 50 Searching using the index function 18 Step 5
Resumo do conteúdo contido na página número 4
Getting Started Index to parts and controls Refer to the pages indicated in parentheses ( ) for details. Front panel For SLV-ED828ME/SG 1?/1 ON/STANDBY switch 9M FF (fast-forward) button (30) (45) 2 Remote sensor (11) q;m REW (rewind) button (30) (45) 3 Tape compartment qa EASY TIMER (36) 4A EJECT button (30) qs PROGRAM/TRACKING +/– 5H PLAY button* (30) (45) buttons* (37) (51) 6x STOP button* (17) (30) (57) qd LINE-2 IN VIDEO/AUDIO L/R 7z REC (record) button (33) (46) (left/right) jacks (55) (5
Resumo do conteúdo contido na página número 5
Getting Started For SLV-ED323ME/SG 1?/1 ON/STANDBY switch 8z REC (record) button (33) (46) (57) 2A EJECT button (30) 9x STOP button (17) (30) (57) 3 Remote sensor (11) q;X PAUSE button (30) (41) (57) 4 Tape compartment qa EASY TIMER (36) 5m REW (rewind) button (30) (45) qs PROGRAM/TRACKING +/– 6H PLAY button (30) (45) buttons* (37) (51) 7M FF (fast-forward) button (30) (45) * The PROGRAM/TRACKING + button has a tactile dot. continued Getting Started 5
Resumo do conteúdo contido na página número 6
Index to parts and controls (continued) Display window 1426 3 5 7 0 9 8 1 Tape indicator 7 Timer indicator (39) (43) 2 START indicator (37) 8 Recording indicator (33) 3 STOP indicator (37) 9 Time counter/clock/line/programme position indicator (31) (32) (57) 4 MONTH indicator (40) 0 Tape speed indicators (32) (38) 5 YEAR indicator 6 STEREO indicator* (49) * SLV-ED828ME/SG only Getting Started 6
Resumo do conteúdo contido na página número 7
Getting Started Rear panel For SLV-ED828ME/SG 1 2 3 5 4 For SLV-ED323ME/SG 1 2 3 5 4 1 (in from antenna) connector (13) 4 LINE OUT AUDIO R/L/VIDEO 1 (audio right/audio left/video) jacks* 2 LINE IN 1 AUDIO R/L/VIDEO 2 LINE OUT AUDIO/VIDEO jacks* 1 (audio right/audio left/video) jacks* (14) (56) 2 LINE IN 1 AUDIO/VIDEO jacks* 5 (out to tv) connector (13) (55) 1 3 Mains lead (13) * SLV-ED828ME/SG only 2 * SLV-ED323ME/SG only continued Getting Started 7
Resumo do conteúdo contido na página número 8
Index to parts and controls (continued) 1Z EJECT button (30) Remote commander 2 INPUT SELECT button (32) (42) (57) 3 TV/VIDEO button (for TV) 4 CLEAR button (31) (47) 5 Programme number buttons* 6 -/-- (ten’s digit) button 7 VOL (volume) +/– buttons 123 8z REC (record) button (33) (46) 456 9 REC SPEED (recording speed) button (32) 789 q; MENU button (21) (47) 0 qaX PAUSE/M button (21) (30) x STOP/m button (21) (30) m REW (rewind)/< button (21) (30) (45) M FF (fast-forward)/, button (21) (30) (45
Resumo do conteúdo contido na página número 9
Getting Started qs?/1 (on/standby) switch (43) qd •TV/VIDEO remote control switch (11) 1 2 qf AUDIO MONITOR button* * (49) qg DISPLAY button (31) (33) 1 qh PROG (programme) +/– buttons* (34) qjy SLOW button (45) qk ×2 button (45) 123 ql./> INDEX SEARCH 456 buttons (50) 789 1 * The H PLAY, AUDIO MONITOR, 0 number 5 and PROG + buttons have a tactile dot. 2 * SLV-ED828ME/SG only Getting Started 9
Resumo do conteúdo contido na página número 10
Step 1 : Unpacking Check that you have received the following items with the VCR: • Remote commander • Aerial cable • R6 (size AA) batteries • Plug adaptor (SLV-ED828ME and ED323ME only) Check your model name The instructions in this manual are for the 4 models: SLV-ED828ME/SG and ED323ME/SG. Check your model name by looking at the rear panel of your VCR. SLV-ED828ME is the model used for illustration purposes. Any difference in operation is clearly indicated in the text, for example, “SLV-ED
Resumo do conteúdo contido na página número 11
Getting Started Step 2 : Setting up the remote commander Inserting the batteries Insert two R6 (size AA) batteries by matching the + and – on the batteries to the diagram inside the battery compartment. Insert the negative (–) end first, then push in and down until the positive (+) end clicks into position. Using the remote Remote sensor commander You can use this remote commander to operate this VCR and a Sony TV. Buttons on the remote commander marked with a dot (•) can be used to operate you
Resumo do conteúdo contido na página número 12
Step 2 : Setting up the remote commander (continued) Notes • With normal use, the batteries should last about three to six months. • If you do not use the remote commander for an extended period of time, remove the batteries to avoid possible damage from battery leakage. • Do not use a new battery together with an old one. • Do not use different types of batteries together. • Some buttons may not work with certain Sony TVs. Getting Started 12
Resumo do conteúdo contido na página número 13
Getting Started Step 3 : Connecting the VCR Connect the aerial to your VCR and TV as shown below to watch TV programmes and VCR pictures on your TV. In addition, if your TV has audio/video (A/V) input jacks, we recommend you connect the VCR to your TV using an audio/video cable to get a better picture and sound. Connecting the aerial Mains lead AERIAL IN to mains Aerial cable (supplied) : Signal flow 1 Disconnect the aerial cable from your TV and connect it to on the rear panel of the VCR. 2 C
Resumo do conteúdo contido na página número 14
Step 3 : Connecting the VCR (continued) Additional connections For SLV-ED828ME/SG To a TV that has audio/ video input jacks This additional connection improves picture and sound LINE OUT quality. Connect the TV as LINE IN shown on the left. Audio/video cable (not supplied) For SLV-ED323ME/SG LINE OUT LINE IN Audio/video cable (not supplied) To a stereo system (SLV-ED828ME/SG only) You can improve sound LINE OUT quality by connecting a AUDIO R/L LINE IN stereo system to the LINE OUT AUDIO R/L ja
Resumo do conteúdo contido na página número 15
Getting Started Step 4 : Setting up the VCR with the Auto Set Up function Before using the VCR for the first time, set up the VCR using the Auto Set Up function. With this function, you can set the language for the on-screen display and TV channels automatically. 1 Turn on your TV and set it to the video channel. Tune the TV to channel 32 (the initial RF channel for this VCR). Refer to your TV manual for TV tuning instructions. If the picture does not appear clearly, see “To change the RF chan
Resumo do conteúdo contido na página número 16
Step 4 : Setting up the VCR with the Auto Set Up function (continued) 3 Press OK. PLAY The SYSTEM SELECT menu – B/G OK appears. – D/K – I : MENU : OK : 4 Press M/m to select the appropriate TV system, then press OK. PLAY OK The VCR starts searching for all of the receivable channels and presets 40% them (in the appropriate order for your local area). MENU : If you want to change the order of the channels or disable unwanted programme positions, see “Changing/disabling programme positions” on pa
Resumo do conteúdo contido na página número 17
Getting Started To cancel the Auto Set Up function Press MENU. To change the RF channel If the picture does not appear clearly on the TV, change the RF channel on the VCR and TV. Select INSTALLATION from the menu, then press M/m to highlight VCR OUTPUT CH and press <. Select the RF channel by pressing the M/m buttons. Then, tune the TV to the new RF channel so that a clear picture appears. Tip • If you want to change the language for the on-screen display from the one preset in the Auto Set U
Resumo do conteúdo contido na página número 18
Step 5 : Setting the clock You must set the time and date on the VCR to use the timer features properly. Before you start… • Turn on the VCR and the TV. • Set the TV to the video channel. • Refer to “Index to parts and controls” for button locations. MENU 1 Press MENU, then press M/m/
Resumo do conteúdo contido na página número 19
Getting Started 4 Set the day, month, and year in sequence by pressing < to select PLAY the item to be set, and press M/m to OK 2002 2 8/0 9 18 : 3 select the digits, then press <. The day of the week is set automatically. : : MENU : OK : MENU 5 Press MENU to exit the menu. Tip • To change the digits while setting, press , to return to the item to be changed, and select the digits by pressing M/m. Getting Started 19
Resumo do conteúdo contido na página número 20
Step 6 : Selecting the TV system You must select the appropriate TV system for your area. Before you start… • Turn on the VCR and the TV. • Set the TV to the video channel. • Refer to “Index to parts and controls” for button locations. MENU 1 Press MENU, then press M/m/
