Manual do usuário VocoPro PV-802

Resumo do conteúdo contido na página número 1

Attaching the Speaker Stand Adapters
The PV-802 speakers can each be mounted on speaker stands using a VocoPro speaker stand adapter (sold separately).
NOTE: These speaker stand adapters are included with the purchase of VocoPro SS-88 speakers
stands. Contact your local VocoPro dealer to order a pair of VocoPro SS-88 speaker stands.
Attaching the Adapter to the Speakers
NOTE: The 4 mounting screws are included with the PV-802.
1. Remove the rubber pads covering the screw openings on the bott

Resumo do conteúdo contido na página número 2

Mounting on a Speaker Stand / Voltage Selector Setting up the Speaker Stands Setup each SS-88 speaker stand by extending the support lefts to a position that is stable and tighten the tension mechanism firmly. Each end of the SS-88 pole has a particular diameter fitted for common speakers’ mounting cavities. If the SS-88 pole does NOT fit flush into the mounting adapter on the PV-802, loosen the SS-88 pole and reverse it in the stand and then remount the speaker. Mounting the Speaker(s) Once the