Resumo do conteúdo contido na página número 1
™ ®
ENGLISH pp. 1-17
™
ESPAÑOL pág. 18-27
FRANÇAIS p. 28-37
Deep Cleaner
The Easy to Use
Deep Cleaner
SteamVac™ Dual V™ Deep Cleaner cleans carpet fibers by
applying hot tap water and cleaning solution.
www.hoover.com
Resumo do conteúdo contido na página número 2
Grounding Important Safeguards! Instructions When using an electrical appliance, always follow basic precautions, including the following: A READ ALL INSTRUCTIONS BEFORE USING APPLIANCE. B WARNING: To reduce the risk of fire, electric shock, or injury: • Use indoors only. • Do not use with damaged cord or plug. If appliance is not working as it C • Use only on surfaces moistened by should, has been dropped, damaged, the cleaning process. Do not immerse left outdoors, or dropped into water, This
Resumo do conteúdo contido na página número 3
Thank you for choosing a HOOVER product. Contents Important safeguards . . . . . . . . . . 2 If you need any assistance: Parts needed for assembly. . . . . . . 3 Visit our website at www.hoover.com. Click on the “Service” button to find Assembling deep cleaner . . . . . . 4-6 the service outlet nearest you OR Deep cleaner description . . . . . . . . 6 Call 1-800-944-9200 for an automated referral of service outlet locations (U.S. General operation . . . . . . . . . . . . 7-9 only) OR Filling
Resumo do conteúdo contido na página número 4
The assembled cleaner will look like this 1-2 1-3 C drawing. Model with SpinScrub™ hand tool is shown. B A NOTE: If the cord protector (A) on back Attach upper handle of handle should become dislodged Remove clean water tank (upper tank) during unpacking, make sure it is repo- from deep cleaner. sitioned properly before continuing with assembly of your deep cleaner. With the arrow (B) on the cord protector pointing down, press groove (C) in the cord protector into slot in the lower handle. 1-5
Resumo do conteúdo contido na página número 5
1-9 1-10 1-11 I H G I J Rotate top of caddy toward cleaner Identify the hose parts before storing Storing hose and handle. Slide caddy down so notch (G) hose. tools on caddy rests in hook (H) on cleaner. I. Nozzle connector end Press hose, a few inches from nozzle J. Solution tube connector end (I), into caddy. Bring hose up and over top of caddy. 1-12 1-13 1-14 M J L K Press hose into opposite side of caddy. Loop hose over top of caddy again. Repeat on other end of hose. Loop hose at bottom of
Resumo do conteúdo contido na página número 6
1-18 1-19 Pull tool down and outward. How to reattach tool To reposition the tool, reverse this proce- cover dure. The tool cover is designed with a break- away feature which allows it to snap free if it is pushed open too far. To reattach, align hinges of cover with holes on sides of tool storage area. Snap door into place. 2. How to use The assembled deep cleaner will look like the drawing. Deep Cleaner Description Model with SpinScrub™ hand tool is shown. 1. Hand grip 2-1 2. Solution trigge
Resumo do conteúdo contido na página número 7
2-2 2-3 2-4 A To transport Handle release pedal ON/OFF switch Step on pedal (A) to lower handle to To turn cleaner ON, push switch down. To move your deep cleaner from room to operating position. Handle does not lock room, put handle in upright and locked To turn cleaner OFF, push switch up. into a single position but “floats” to allow position, tilt deep cleaner back on convenient operation. wheels and push forward. 2-6 2-5 2-7 B Carrying handle Automatic shut off Brush setting selector When th
Resumo do conteúdo contido na página número 8
2-9 2-10 2-8 C D How to fill Wash/rinse switch The tanks Unplug deep cleaner from electrical This switch allows you to easily change Clean water tank outlet. from cleaning your carpet or floor with a (upper tank) detergent/water mix to rinsing with water Place deep cleaner handle in the The clean water tank (C) holds the water only. upright, locked position. that will either be mixed with detergent To remove tank, press down on tank for cleaning the carpet or floor, or used Set the switch to WA
Resumo do conteúdo contido na página número 9
2-17 2-18 2-16 Position bottom of tank onto cleaner Push the top of the tank and tank Push up on the handle once the tank is using one hand on each side of the tank back to latch it to the unit. handle while supporting the back of the to center it on the unit. unit with your other hand. NOTE: the tank pivots towards the back of the unit. 2-20 2-21 2-19 Position bottom of tank onto cleaner and NOTE: There may be a small amount of Check tank to make sure it is securely pivot tank to snap it into p
Resumo do conteúdo contido na página número 10
d. When cleaning entire floor, move f. To prevent staining, use plastic or alu- furniture out of area to be cleaned minum foil to protect wood or metal sur- 3. How to clean (may not be necessary if only high traf- faces from possible water spray. fic areas are to be cleaned). For furni- g. To avoid wetting and possible damage Before you begin ture too heavy to move, place aluminum to wood floors underneath area rugs/car- foil or wax paper under legs. This will cleaning pet, either move area rugs
Resumo do conteúdo contido na página número 11
To clean nozzle 3-4 If lint or other debris becomes lodged in A nozzle, it can be removed for cleaning. B 3-3 To replace nozzle, line up tabs (A) on nozzle with holes (B) in cleaner. Slide tabs into holes. Slide nozzle completely onto cleaner. Unplug deep cleaner from electrical Press down on nozzle to secure it. outlet. Replace recovery tank (Figs. 2-21 and Remove both tanks as described in Figs. 2-22). 2-10 and 2-21. With handle in upright The nozzle must be in the proper position, tilt cle
Resumo do conteúdo contido na página número 12
R B O A T R E A T F L E O O O R N 6. Set Wash/Rinse switch to WASH. Turn 3-9 Cleaning bare floors cleaner ON. 7. To release solution, press trigger. How to attach bare floor Slowly move deep cleaner forward and attachment backward over area to be cleaned. (Available at additional cost if not includ- 8. To pick up dirty solution, release trig- ed with your cleaner.) ger and slowly move deep cleaner over area where solution has just been dis- Unplug deep cleaner from electrical persed. Use both fo
Resumo do conteúdo contido na página número 13
Remove solution tube (F) from solution 3-13 connection port. H F To remove hose: Squeeze latches (H) on top and bottom of hose. Remove hose from port. Close door. Select tool How to attach tools Your model includes some combination I. SpinScrub™ hand tool has rotating 3-15 of the following tools, but may not brushes for extra scrubbing action on include them all. L small carpet areas, carpeted stairs and upholstery. For some models, the 3-14 brushes can be removed for converting to the scrub mo
Resumo do conteúdo contido na página número 14
After using scrub tool 3-19 To clean scrub pad, pull it off module. Wash it in water with mild detergent. Rinse and let air dry. Pad must be com- pletely dry before reattaching to module. Replacement pads may also be pur- chased. Ask for HOOVER part no. 40308001. Using the scrub tool With a little solution, test the scrub tool on a hidden area before using on the desired surface. If no surface change is visible, continue to use as described below. 1. Attach hose and solution tube as instructed i
Resumo do conteúdo contido na página número 15
3-22 3-23 Cleaning upholstery Read “Before you begin cleaning” instructions on page 9. Be sure to check the cleaning code on your upholstery. Use your deep cleaner only on upholstery marked “W” or “W/S”. 1. Attach hose and solution tube as instructed in Figs. 3-10 to 3-12. 2. Place handle in upright position. Agitator brushes will not rotate while 8. Gently press the tool onto the fabric. Make no more than 2 passes with the handle is in upright position. Press the trigger and slowly pull the
Resumo do conteúdo contido na página número 16
Possible cause 5-1 Storage 5. If you have a A Possible solution Before storing: • Recovery tank full/automatic problem • Empty clean water tank and let air If a minor problem occurs, it usually can A dry. Replace on deep cleaner. be solved quite easily when the cause is • Unused detergent can be stored in found by using the check list below. the detergent container. • Empty recovery tank, rinse tank Problem: Machine won’t run and lid thoroughly with clean water Possible cause and let air dry.
Resumo do conteúdo contido na página número 17
Full One Year Service To obtain approved HOOVER service Warranty and genuine HOOVER parts, locate the (Domestic Use) nearest Hoover Sales and Service Center or Authorized Hoover Warranty Service Dealer (Depot) by: Your HOOVER® appliance is warranted •checking the Service section of in normal household use, in accordance Hoover on-line at www.hoover.com with the Owner’s Manual against original OR defects in material and workmanship for a period of one full year from date of pur- • checking the l
Resumo do conteúdo contido na página número 18
Anote y guarde HOOVER® Anote los números COMPLETOS de modelo y serie en los espacios provistos y guárdelos. limpiadora en Los números de modelo y de serie se encuentran en la parte de atrás de la aspiradora. profundidad ™ No. de modelo _____________________________ SteamVac No. de serie _____________________________ ™ Dual V Consejo: Adjunte su recibo de compra a este manual del propietario. Para obtener el servicio de garantía de su producto HOOVER puede requerirse la La limpiadora en verificac
Resumo do conteúdo contido na página número 19
Use estas instrucciones en español instalar una toma de corriente eléctrica 1-3 junto conlas figuras paso-a-paso adecuadamente conectada a tierra (B). provistas en el manual de inglés. La orejuela verde y rígida, la extensión o NOTA: Si el protector del cordón (A) se el dispositivo similar (F) que sale del sale de su sitio durante el desempaque, Gracias por haber adaptador se debe conectar a una asegúrese de que vuelva a ser conexión a tierra permanente (G) como elegido un producto colocado de l
Resumo do conteúdo contido na página número 20
retirar y colgar para guardarlo. 2. Cómo usar la 1-14 Si no lo desea instalar en la limpiadora por ahora, continúe con la figura 1-10 limpiadora en Repita en el otro extremo de la para ver cómo colocar adecuadamente manguera. Oprima el tubo de solución profundidad la manguera en el portaaccesorios. (J) en el lado opuesto del clip. 2-1 1-8 1-15 Deslice las lengüetas (E) del Descripción de la portaaccesorios en las ranuras (F) que Inserte la parte superior del accesorio limpiadora en están en la
