Resumo do conteúdo contido na página número 1
CABINET TYPE AIR CONDITIONER
Operation & Installation Manual
FAN SET HEALTH TEMP+ TEMP- HEALTH
ON/OFF MODE HUMI TIMER
TEMP SLEEP
AP482AKEAA
AP602AKEAA
No.0010578212
Please read this operation manual before using the air conditioner.
Please keep this manual carefully and safely.
Resumo do conteúdo contido na página número 2
Content Operation 1-2 Cautions Parts 3-4 Operation 5-12 Operation hints 13 Energy saving 14 Maintenance 15-16 Trouble shooting 17 When problems occur 18-19 Indoor & outdoor unit connection 20 21 Tools necessary 22-26 Installation procedures 27 Others
Resumo do conteúdo contido na página número 3
Cautions Disposal of the old air conditioner Consult your local authorities for the name and address of the waste materials Before disposing an old air conditioner collecting centers and waste paper that goes out of use, please make sure disposal services nearest to your house. it's inoperative and safe. Unplug the air conditioner in order to avoid the risk of Safety Instructions and Warnings child entrapment. Before starting the air conditioner, read It must be noticed that air conditioner the
Resumo do conteúdo contido na página número 4
Cautions All electrical repairs must be carried 2. If the supply cord is damaged, it must out by qualified electricians. be replaced by the manufacturer or its Inadequate repairs may result in a service agent or a similar qualified major source of danger for the user of person. the air conditoiner. 3. If the fuse on PC board is broken Do not damage any parts of the air please change it with the type of T 3.15A conditioner that carry refrigerant by /250VAC. piercing or perforating the air
Resumo do conteúdo contido na página número 5
Parts 1 SET HEALTH ON/OFF MODE FAN TEMP+ TEMP- HEALTH HUMI TIMER SLEEP TEMP 2 ON/OFF MODE FAN SET HEALTH TEMP+ TEMP- HEALTH HUMI TEMP TIMER SLEEP 2 SET HEALTH HUMI TIMER TEMP SLEEP I n d o o r u n i t 3 1 Outlet grill 2 Operation panel 3 Inlet grill 4 4 Air filter [inside the unit] Remote controller 1 TEMP ON FAN HEALTH OFF MODE SLEEP SWING 2 CLOCK SET TIMER HEAT RESET LIGHT LOCK Outdoor unit 1 Inlet grill 2 Outlet grill 3
Resumo do conteúdo contido na página número 6
Parts Manual Operation SET HEALTH ON/OFF MODE FAN TEMP+ TEMP- HEALTH HUMI TIMER TEMP SLEEP 1 12 2 14 11 20 21 4 TIMER 14 TEMP Used to select Used to set temp.,temp. 22 B A TIMER ON, TIMER range:16 C~30 C OFF, TIMER 27 19 15 Timer ON/OFF display ON/OFF. 28 18 16 Fan speed and air 17 5 LOCK sending direction display 25 Used to lock buttons 24 and LCD display. Remote 23 controller LOW MID HIGH AUTO 26 6 RESET 16 14 TEMP Used to reset the 15 Control 2 12 3 2 12 3 4 3 2 12 34 4 3 2 12 34 panel contr
Resumo do conteúdo contido na página número 7
Operation Clock set MODE When unit is started for the first time SLEEP SWING and after replacing batteries in remote controller, clock should be adjusted as follows: SET CLOCK TIMER 1 Press CLOCK button, "AM"or "PM" flashes. 3 1 2 2 Press or to set correct time. Each press will increase HEAT or decrease 1 min . If the button is kept pressed, time will LIGHT LOCK RESET change quickly. 3 After time setting is confirmed, press SET, "AM" and "PM" stop flashing, while clock starts working. Re
Resumo do conteúdo contido na página número 8
Operation MODE FAN TEMP+ TEMP- HEALTH ON/OFF TEMP Control panel Remote-control unit Remote AUTO COOL DRY FAN HEAT controller Control panel AUTO COOL DRY FAN HEAT Then select AUTO run or select COOL operation or select DRY operation or select HEAT operation* 3 Select temp. button Press TEMP button TEMP TEMP+ Every time the button is pressed, temp. ON FAN setting increases 1 C HEALTH OFF TEMP- Every time the button is pressed, temp. MODE setting decreases 1 C SLEEP SWING If the butt
Resumo do conteúdo contido na página número 9
Fan Operation Operation Manual Operation Control panel MODE FAN TEMP+ TEMP- HEALTH ON/OFF TEMP Remote controller 1.Unit start Press ON/OFF button to start your air conditioner. Previous operation status appears on LCD (except for TIMER, SLEEP, setting). 2.Select operating mode Press MODE button. At each press, operation mode changes as follows: Remote AUTO COOL DRY FAN HEAT controller TEMP ON Control panel AUTO FAN COOL DRY HEALTH OFF FAN HEAT MODE Then select FAN SLEEP SWING 3. Adjust fan spee
Resumo do conteúdo contido na página número 10
Operation Air flow adjustment Swing louvers (Vertical louvers) (Horizontal louvers) Up and down Side from side Position 1 Position 1 (Not availble in these units) Position 2 Position 2 Position 3 TEMP (Not availble in these units) ON FAN Position 3 HEALTH OFF Position 4 MODE Position 4 SLEEP SWING Position 5 CLOCK SET [COOL/DRY/FAN Position 5 /AUTO(COOL) TIMER have not] Position 6 HEAT (AUTO SWING) Position 6 RESET LIGHT LOCK Position 7 Position 8 (AUTO SWING) 2.Up & down air direction Press the
Resumo do conteúdo contido na página número 11
Operation Sleep Function Control panel MODE FAN TEMP+ TEMP- HEALTH ON/OFF TEMP SLEEP Use of SLEEP function Before using this function, the clock must be set. After the unit's start, set running mode and then press SLEEP button once to make the air conditioner have the previous-set sleep time (first power-on is "1h"). The sleep symbol will appear. Press time button / : you can choose the time in 1~8 hours. Each time the button is pressed, the time increases/decreases 1 hour: "xh" and "OFF" in
Resumo do conteúdo contido na página número 12
Timer ON/OFF Function Operation Manual Operation TIMER MODE FAN TEMP+ TEMP- HEALTH ON/OFF TEMP Control panel Set clock correctly before starting TIMER operation Remote controller 1.Unit start After unit start, select your desired operation mode (operation mode will be displayed on LCD) 2.TIMER mode selection Press TIMER button on the remote controller to change TIMER mode. Every time the button is pressed, display of TIMER mode ON changes as follows: blank ON OFF ON OFF TEMP AM AM 12:00 PM12:00
Resumo do conteúdo contido na página número 13
Timer ON-OFF Function Operation Manual Operation Control panel MODE FAN TEMP+ TEMP- HEALTH ON/OFF TIMER TEMP Set clock correctly before starting TIMER operation Remote controller 1.Unit start After unit start, select your desired operation mode (operation mode will be displayed on LCD) 2.TIMER mode selection Press TIMER button on the remote controller to change TIMER ON mode. Every time the button is pressed, display of TIMER mode changes as follows: TEMP ON OFF ON OFF blank ON AM AM 12:00 PM12:
Resumo do conteúdo contido na página número 14
Control panel display Operation Control panel ON/OFF MODE FAN TEMP+ TEMP- HEALTH TEMP Display function 1.Control panel display control: Press the LIGHT button ,the LCD will display according to the following sequence when press once : LCD bright LCD bright LCD not bright Buzzer not act Buzzer act Buzzer act 2.LCD color control: Function Color Priority Function Color Priority Auto White & Pink 1 Blowing Yellow & Green 1 Cooling Blue 1 Negativeion& Green 2 Anti-bacterial Heating & Auxillary
Resumo do conteúdo contido na página número 15
Operation hints Unit operation Protection devices inside the unit will activate to stop unit operation, when ambient temp. is extremely low or high. When unit is running under high humidity in cooling or dehumidifying mode, condensate might appear at outlet grill. 3-min delay protection Unit will not restart until 3 min have elapsed for the protection of the unit. Fan speed changes When Fan speed is set at Auto in cooling mode, it will be automatically reduced as room temp. is approaching temp
Resumo do conteúdo contido na página número 16
Energy saving Keep proper room temp. Too cold or too warm is no good to your health, and power consumption will be increased as well. Proper temp. Air filter should be periodically cleaned If air filter is clogged: It will cause poor cooling and heating efficiency, higher power consumption and even problem may occur. In cooling operation, water will flow out. Use Timer effectively OFF ON You may use Timer mode to keep AM PM5:00 8:00 a comfortable room temp.when you wake up or come home from outs
Resumo do conteúdo contido na página número 17
Maintenance Disconnect power supply Don't touch it with wet Don't wash with hot water hand or solvent to clean the unit Don't spray any paint or insecticide Don't splash water directly on indoor on the unit. unit. This could be very dangerous This will cause damage or even fire accident. Air filter cleaning Pull it out from top as shown in Fig. Use water or vacuum cleaner to clean it. If it is extremely dirty, wash it with neutral detergent or soap water. Wash it with clean water and install it
Resumo do conteúdo contido na página número 18
Maintenance Indoor and outdoor cleaning Clean it with warm and wet cloth or with neutral detergent, then wipe it dry with clean and soft cloth. If air conditioner is very dirty, clean it with cloth soaked in neutral detergent,then wipe off the detergent with clean water. Don't use water higher than 40 C , which will cause discoloring and deformation. Don't use insecticide or other chemical detergents. After season maintenance Let the unit run in Fan mode for half a day in a fine weather to dry c
Resumo do conteúdo contido na página número 19
Trouble shooting Followings are not problems During unit start and operation or at stop, a swishing or Sound of water flowings are not gurgling noise may be heard. This noise is generated by problems. refrigerant flowing in the system. During unit operation, a cracking noise may be heard. Sound of cracking is heard. This noise is generated by the casing expanding or shrinking because of temperatuer changes. Smells are generated. This is because the system circulates smells from the interior air
Resumo do conteúdo contido na página número 20
When problems occur Before asking services, please firstly check your unit according to following. Air conditioner won't start. Is city power supply normal? Is leakage current breaker Is power supply switch activated? turned on? This is very dangerous, please Power disconnect power supply Power supply failure? immediately and contact your switch is not set dealer. at ON. Poor cooling or heating Are operation controlls Are there any obstacles at inlet Is air filter too dirty? adjusted correctly o
