Resumo do conteúdo contido na página número 1
WALK BEHIND SCRUBBER
Operating Instructions (ENG)
Instruccio nes de funcionamiento (SPA)
MODELS: SCX364
10052410
IPX4
Read these instructions before using the machine
AK
86037150 02/20/09
PRV NO. 980090
Resumo do conteúdo contido na página número 2
MACHINE DATA LOG/OVERVIEW MODEL _______________________________________ DATE OF PURCHASE __________________________ SERIAL NUMBER ______________________________ SALES REPRESENTATIVE # _____________________ DEALER NAME ________________________________ OPERATIONS GUIDE NUMBER ___________________ PUBLISHED __________________________________________
Resumo do conteúdo contido na página número 3
TABLE OF CONTENTS Machine Data Log/Overview.........................2 Adjusting Squeegee.......................... ........ 4-13 Table of Contents .........................................3 Replace or Rotate Front Squeegee Blade. 4-13 Adjusting Front Squeegee Deflection ........ 4-14 Greasing Axles.................................. ........ 4-15 HOW TO USE THIS MANUAL Machine Troubleshooting.................. ........ 4-16 How to use this Manual. ...............................1-1
Resumo do conteúdo contido na página número 4
HOW TO USE THIS MANUAL This manual contains the following sections: The SAFETY section contains important information regarding hazard or unsafe practices of the - HOW TO USE THIS MANUAL machine. Levels of hazards are identified that could - SAFETY result in product or personal injury, or severe injury - OPERATIONS resulting in death. - MAINTENANCE The OPERATIONS section is to familiarize the - PARTS LIST operator with the operation and function of the machine. The HOW TO USE
Resumo do conteúdo contido na página número 5
IMPORTANT SAFETY INSTRUCTIONS When using an battery powered appliance, basic precaution must always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING THIS MACHINE. To reduce the risk of fire, electric shock, or injury: Use only indoors. Do not use outdoors or expose to rain. Use only as described in this manual. Use only manufacturer’s recommended components and attachments. If the machine is not working properly, has been dropped, damaged, left outdoors, or dr
Resumo do conteúdo contido na página número 6
HAZARD INTENSITY LEVEL The following symbols are used throughout this guide as indicated in their descriptions: HAZARD INTENSITY LEVEL There are three levels of hazard intensity identified by signal words -WARNING and CAUTION and FOR SAFETY. The level of hazard intensity is determined by the following definitions: WARNING - Hazards or unsafe practices which COULD result in severe personal injury or death. CAUTION - Hazards or unsafe practices which could result in minor personal injur
Resumo do conteúdo contido na página número 7
SAFETY LABEL LOCATION NOTE: These drawings indicate the location of safety labels on the machine. If at any time the labels become illegible, promptly replace them. SAFETY DECAL 86252520 PRV NO. 81494 PINCH POINT WARNING 86243830 PRV NO. 500663 BATTERY CAUTION 86252530 PRV NO. 80885 CIRCUIT BREAKER DECAL 86243530 PRV NO. 500565 SEE MANUAL 2% GRADE WARNING SCX364 86037150 1/17/07 2-3
Resumo do conteúdo contido na página número 8
TECHNICAL SPECIFICATIONS ITEM DIMENSION/CAPACITY Nominal power 1440 Watts Rated Voltage 24VDC Rated Amperage 60 Amps 4 X 6 Volt 250-305-335AH @ 20 hr Batteries rate Scrub Brush Motors .33 hp (0.25 Kw) Vacuum Motor .75 hp (0.56 Kw) Propelling Motor .3 hp (0.22 Kw) Mass (GVW) 956 pounds (433 kg) Weight empty without batteries 395 pounds (179 kg) Gravity feed, fully variable with Solution Control automatic shut-off in neutral Solution tank capacity 23 gal. (87 l) Recovery tank cap
Resumo do conteúdo contido na página número 9
TECHNICAL SPECIFICATIONS ITEM MEASURE Height 45 in. (114 cm) Length with 36 in. (90 cm) scrub head 72 in. (183 cm) Width without squeegee and scrub head 24 in. (61 cm) Width of squeegee for 36 in. (90 cm) scrub head 35 in. (89 cm) Width of scrub path for 36 in. (90 cm) scrub head 36 in. (90 cm) 23.5” L (60 cm) x 15” W (38 cm) x 14” Battery Compartment Dimensions H (36 cm) LENGTH WIDTH HEIGHT SPECIAL NOTES: The sound pressure level at the operat
Resumo do conteúdo contido na página número 10
HOW THE MACHINE WORKS The function of the recovery system is to vacuum The Saber Cutter is a battery powered, self- propelled, hard floor scrubber intended for the soiled water back into the recovery tank. The recovery system consists of two squeegees, vacuum commercial use. The appliance applies a cleaning solution onto a hard floor, scrubs the floor with motor, float ball filter, recovery tank and controls. The squeegees wipe the dirty solution off the floor brushes, and then vacu
Resumo do conteúdo contido na página número 11
COMPONENTS 1. Cont rol Panel 2. Front Cover 3. Recovery Tank 11 4. Recovery Tank Drain Hose 5. Scrub Head Fixed 6. Solution Tank 7. Solution Tank Cover 3 13 8. Solution Tank Drain Hose 9. Solution Strainer 10. Rear Squeegee 1 11. Top Cover 7 12. Vacuum Motor 2 13. Recovery Tank Dome 14. Scrub Head Swinging 4 15. Side Squeegee 16. Park Brake (Optional) 16 9 6 12 5 10 8 15 14 1. Control Panel 9. Solution Strainer 2. Front Cover 10. Rear Squeegee 3. Recovery Tank 11.
Resumo do conteúdo contido na página número 12
CONTROLS 2 13 17 3 5 6 9 8 16 7 1 15 4 10 14 12 11 3-5 SCX364 86037150 1/17/07
Resumo do conteúdo contido na página número 13
CONTROLS 1. Key Switch 10. Squeegee Lift Lever 2. Emergency Shut Off Switch (Optional) 11. Squeegee Pitch Adjustment Knob 3. Speed Control Knob 12. Squeegee Deflection Adjustment Knobs 4. Propel Control Lever 13. Battery Charge Level Indicator 5. Reverse Button 14. Parking Brake (Optional) 6. Brush Switch 15. Hour Meter 7. Actuator Switch Deck Up-Down 16. Brush Pressure Indicator 8. Solution Control Knob 17. Actuator Switch Deck In-Out 9. Vacuum Switch 1. KEY SWITC
Resumo do conteúdo contido na página número 14
CONTROLS 11. SQUEEGEE PITCH ADJUSTMENT KNOB 7. ACTUATOR SWITCH DECK UP-DOWN Adjusts the amount of brush pressure to the Adjusts the deflection at the ends of the squeegee. floor by raising or lowering the scrub deck. Use the brush pressure indicator to determine To increase squeegee blade deflection at the the correct pressure. ends, turn knob counterclockwise. To increase brush pressure, press the bottom To decrease squeegee blade deflection at the of the switch. ends, turn k
Resumo do conteúdo contido na página número 15
CONTROLS 13. BATTERY CHARGE LEVEL INDICATOR 16. BRUSH PRESSURE INDICATOR Indicates the charge level of the batteries. The brush pressure indicator corresponds to the amp draw of the scrub brush motors to tell The meter display is divided into 10 vertical bars. how hard the motors are working. The green Bar illuminated on the far right indicate full charge. zone indicates medium or proper operating Bars flashing near the left side indicate the brush pressure. The red zone indicates
Resumo do conteúdo contido na página número 16
MACHINE OPERATION FILLING SOLUTION TANK PRE-RUN MACHINE INSPECTION FOR SAFETY: Before leaving or servicing Do a pre-run inspection to find possible problems machine; stop on level surface, turn off machine that could cause poor performance or lost time from and remove key. breakdown. Follow the same procedure each time to avoid missing steps. 1. Turn the machine power off. NOTE: See maintenance section for pre-run 2. Set the parking brake if your machine is machine
Resumo do conteúdo contido na página número 17
MACHINE OPERATION 4. Select the scrub path width that you wish to NORMAL SCRUBBING clean with. Plan the scrubbing pattern in advance. The longest track is around the perimeter of the area to be 5. Lower the scrub brushes to the floor. cleaned. For efficient operation, the runs should be the longest possible without turning, 6. Turn the scrub brushes on (brushes will start stopping, or raising and lowering scrub when machine is propelled). deck/squeegee. 7. Drive machi
Resumo do conteúdo contido na página número 18
MACHINE OPERATION DOUBLE SCRUB SOLUTION TANK For floors which are heavily soiled or have thick 1. Loosen small drain hose from the retainer, then accumulations of floor finish may not clean lower hose in direction of the drain. sufficiently with one pass. In these cases it will be 2. Remove the solution tank cover. necessary to double scrub. 3. Flush the solution tank out with clean water and To double scrub, make the first pass over the surface being cleaned with both squeegees
Resumo do conteúdo contido na página número 19
MAINTENANCE SERVICE SCHEDULE 100 200 MAINTENANCE DAILY WEEKLY MONTHLY HRS HRS Check batteries after charging; add water if necessary * Check pad wear to prevent buildup of chemicals * Check linkages and connectors for wear and damage * * Check hoses for wear, blockages, or damage Clean squeegee; check for adjustment; inspect for wear * Check handles, switches, knobs, domes, and gaskets for damage * Clean out recovery tank * Clean out solution tank; r
Resumo do conteúdo contido na página número 20
MAINTENANCE 4 1 11 8 6 5 7 10 2 12 13 9 3 7. Traction Motor 1. Batteries 8. Circuit Breakers 2. Rear Squeegee 9. Scrubhead Fixed and Swinging 3. Scrub Brushes 10. Vacuum Motor 4. Float Shut-Off 11. Actuator Scrub Deck Up-Down 5. Solution Strainer 12. Actuator Scrub Deck In-Out 6. Brush Motor 13. Side Squeegee 4-2 SCX364 86037150 1/17/07
