Resumo do conteúdo contido na página número 1
SEBO automatic
Series
For Household Use Only
©Copyright SEBO America, LLC • All rights reserved.
ENGLISH
Resumo do conteúdo contido na página número 2
SEBO automatic X Series Owner’s Manual Series Table of Contents Technical Details 2 Wiring Diagram 2 Important Safety Instructions 3 Special SEBO Product Features 4 Automatic Power Head Height Adjustment 4 Brush Roller Obstruction – Auto Shut-Off 4 Brush Roller Deterioration Warning 4 Stationary Use Warning 4 Bag Full or Clog Warning – Auto Shut-Off 4 Identification of Parts 5 Assembly 5 Optional Attachments 5 Standard Attachments 5 Operating Instructions 6 Starting the Machine 6 Operating Posi
Resumo do conteúdo contido na página número 3
! IMPORTANT SAFETY INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE USING THIS MACHINE When using an electrical appliance, basic precautions must always be followed. To reduce the risk of electric shock, this vacuum cleaner has a polarized plug; one blade is wider than the other. This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not change the p
Resumo do conteúdo contido na página número 4
SPECIAL SEBO PRODUCT FEATURES Your SEBO automatic X series vacuum cleaner is the most technically advanced upright vacuum cleaner in the world. Along with its excellent filtration system (99.9% to 0.3 microns), one of its most important features is its ability to “monitor” the resistance of the brush roller against the floor, so that the proper cleaning height is consistently maintained. In addition, the machine has warning systems and automatic shut-off capabilities that are designed to alert t
Resumo do conteúdo contido na página número 5
Identification of Parts 1. Handle grip 12. Attachment hose 2. On/Off switch 13. Handle catch 3. Handle assembly 14. Carrying handle 4. Retaining ring 15. Cable (cord) hook 5. Cover release flap 16. Attachment tube (active wand) 6. Dust bag housing 17. Crevice nozzle 7. Front cover 18. Upholstery nozzle 8. Housing release button 19. Foot pedal 9. Power head with brush 20. Swivel neck 10. Cable (cord) 21. Support lever 11. Attachment tube handle 22. Projection tab 23. Connecting tube Optional Att
Resumo do conteúdo contido na página número 6
Operating Instructions Starting The Machine A. Before turning on your vacuum cleaner, make sure that the vacuum handle is in its upright locked position and that you have a firm hold on the handle grip to keep the machine from moving forward. 15 1. Turn the quick release cable hook (15) to the up position by moving it to the left or right. 2. Release the power cord plug from the power cord and lift the cord off of the upper cord hook (26). 3. With the switch (2) in the “O” (OFF) position, plug
Resumo do conteúdo contido na página número 7
1 Using the Attachment Tube, 12 Hose & Attachments - Figures 1, 2 & 3 11 The attachment tube (16) is useful for vacuuming corners and hard-to-reach areas. The handle grip (1) should be in the upright, locked position (as shown in figure 1).Grip the attachment tube handle (11), pull it up and away from 16 the machine and stretch out the hose (12) until it locks to the back of the tube (this locking action will prevent the hose from retracting back into the attach- 6 ment tube while it is in use).
Resumo do conteúdo contido na página número 8
Maintenance Always unplug vacuum from outlet ! before dismantling any part of machine! Changing the Dust Bag - Figure 7 Dust Bag Part #5093 AM To change the dust bag, pull the cover release flap forward Figure 7 (#5 on page 5) and lift the cover (7) from the dust bag housing. The cover release flap must remain in a for- ward “pulled-out” position to change dust bags and lock them into place. Squeeze the clamps on both sides of the dust bag sealing plate, slide the plate (28) from the holder (29
Resumo do conteúdo contido na página número 9
Clog Removal Always unplug vacuum from outlet before removing ! any clogs! Clogs in the Airflow Pathway - Figure 12 Most clogs can be removed by accessing the airflow pathway via the orange colored access door (38) located on the underside of the power head. Figure 12 However, other clogs may only be removed by accessing the airflow pathway by disassembling the machine in the opposite sequence of the machine’s original assembly (see assembly, page 5). Clogs in the Attachment Hose - Figure 13 Blo
Resumo do conteúdo contido na página número 10
Trouble-Shooting Guide Always unplug vacuum from outlet before dismantling any part of the machine! ! PROBLEM REASON SOLUTION Does not turn on 1. Handle not fully inserted into the bag 1. Release handle catch, push handle or machine shuts off housing, causing a faulty connection. down, close handle catch. intermittently 2. Not plugged into good outlet. 2. Use another outlet. 3. Cable worn. 3. Replace cable. 4. Dust bag housing (6) not seated 4. Housing release button (8) should fully into proper
Resumo do conteúdo contido na página número 11
White-Gray Machine Pos. Part # Description 1 5634 AM Handle complete (dark gray/light gray) SEBO automatic & 2 5297 SE Handle grip (incl. pos. 7+10) 3 5359 DG Grommet 4 5450 DG Power supply cord 5 05112 Switch Filter Bag Housing and Handle 6 5160 HG Switch cap (light gray) 7 5161 DG Switch cap holder 8 5162 Cable clamp 9 0103 Screw C 3.9x16 DIN 7981 10 5253 UL Wire-antistatic 11 5298 ER Handle cable 12 0129 Screw M 4x12 DIN 966 13 5187 Handle tube 14 0102 Screw F 3.9x13 DIN 7981 15 5040 HG Hose
Resumo do conteúdo contido na página número 12
White-Gray Machine Pos. Part # Description 100 5780 AM Power head cover, cpl. (white/dark gray) SEBO automatic 101 5712 GW Exhaust filter catch (white) 102 5143 Exhaust filter 103 5711 GW Exhaust filter cover (white) 104 5729 UL Swivel neck assembly Base 105 5176 UL Male contact holder 106 0102 Screw F 3.9 x 13 DIN 7981 107 2494 Cable clamp 108 5101 Swivel neck bearing r. h. 109 5178 Swivel neck support r. h. 110 5728 Swivel neck support l. h. 111 5717 Swivel neck bearing l. h. 112 5203 ER PCB 1
Resumo do conteúdo contido na página número 13
White-Gray Machine Pos. Part # Description 100 5790 AM Power head cover, cpl. (white/dark gray) SEBO automatic 101 5712 GW Exhaust filter catch (white) 102 5143 Exhaust filter 103 5711 GW Exhaust filter cover (white) 104 5729 UL Swivel neck assembly Base 105 5176 UL Male contact holder 106 0102 Screw F 3.9 x 13 DIN 7981 107 2494 Cable clamp 108 5101 Swivel neck bearing r. h. 109 5178 Swivel neck support r. h. 110 5728 Swivel neck support l. h. 111 5717 Swivel neck bearing l. h. 112 5203 ER PCB
Resumo do conteúdo contido na página número 14
SEBO Vacuum Cleaner Warranty Three Years Non-Wear Parts - One Year Labor 1. Your authorized SEBO dealer or SEBO will provide exhaust filters, the cable (external cord), the attach- the original product purchaser with replacement of ment hose, the brush rollers, the front bottom plate, Non-Wear Parts which fail due to a material or work- the rear bottom plate, the sealing strip, the attach- manship defect for a period of three (3) years from ment tube, the crevice nozzle, the upholstery nozzle, t
