Resumo do conteúdo contido na página número 1
Operation/Reference Guide
MIO R-1 AUDIO
Tango Distributed Audio Remote Control
Initial Release: 2/19/2008
Distributed Audio
Resumo do conteúdo contido na página número 2
AMX Limited Warranty and Disclaimer This Limited Warranty and Disclaimer extends only to products purchased directly from AMX or an AMX Authorized Partner which include AMX Dealers, Distributors, VIP’s or other AMX authorized entity. AMX warrants its products to be free of defects in material and workmanship under normal use for three (3) years from the date of purchase, with the following exceptions: • Electroluminescent and LCD Control Panels are warranted for three (3) years, except for the
Resumo do conteúdo contido na página número 3
Table of Contents Table of Contents Overview ............................................................................................................1 Specifications............................................................................................................ 2 Touch And Tilt Sensor............................................................................................... 2 MIO R-1 AUDIO Setup .................................................................................
Resumo do conteúdo contido na página número 4
Table of Contents Satellite and Other ....................................................................................................... 17 Custom XM ................................................................................................................... 18 Direct Numeric Access ........................................................................................... 18 Tuners.......................................................................................................
Resumo do conteúdo contido na página número 5
Overview Overview The MIO R-1 AUDIO (FG147-04) remote provides custom control features, contained in an elegant handheld device, designed specifically for use with Matrix Distributed Audio Systems using Metreau DAS-MET-6SRC and/or DAS-MET-NUM keypads. The MIO R-1 AUDIO (FIG. 1) controls 6 different device modes, supports 3 macro functions and is capable of executing 219 functions. Selecting a source device sends a command to the master and runs predetermined events associated with that sour
Resumo do conteúdo contido na página número 6
Overview Specifications The MIO R-1 AUDIO device specifications are as follows: MIO R-1 AUDIO Specifications Power Requirements: 4 AAA Alkaline Batteries (included) - approx. 5 hours battery life Transmission AMX 38 KHz/455 KHz IR Frequencies Note: The Metreau MET-6N keypads only support 38 KHz. When used with MET- 6N keypads, the MIO R-1 AUDIO must be set to 38 KHz. Transmission • 100 feet at 38KHz Range (distance) • 50 feet at 455KHz with MIO IR Receiver Transmission • 140 degrees (+/-70° fro
Resumo do conteúdo contido na página número 7
MIO R-1 AUDIO Setup MIO R-1 AUDIO Setup Installing Your Custom Buttons 1. Flip and turn the MIO R-1 AUDIO so that the buttons are facing away from you and the device is upside down. 2. Holding the device in both hands, place your thumbs on the battery door and push up to slide the battery door free. 3. Unscrew the 6 screw points indicated in FIG. 2. 1 4 2 5 3 6 FIG. 2 6 screwpoints (battery compartment cover removed) 4. Turn the unit over so the buttons are facing you. 5. Lift the top assemb
Resumo do conteúdo contido na página número 8
MIO R-1 AUDIO Setup Battery Low Indicator When the battery charge level is too low to sustain continuous operation, the LCD flashes, "Battery Low" and the device shuts down. 4 MIO R-1 AUDIO
Resumo do conteúdo contido na página número 9
Programming The MIO R-1 AUDIO Programming The MIO R-1 AUDIO Most functionality of the MIO R-1 AUDIO is handled using the application KeypadBuilder. Go to www.amx.com for the KeypadBuilder Instruction Manual. The MIO R-1 AUDIO recognizes a select number of Serial Commands. For a full list and descriptions, consult Persistent Serial Commands section on page 10. Using Connector Ports on The MIO R-1 AUDIO The programming jack is used for communication between the device and KeypadBuilder. The pro
Resumo do conteúdo contido na página número 10
Programming The MIO R-1 AUDIO IR Code Matrix The IR Code emitted depends upon which of the 6 configurable modes is selected. Below is the list of codes for each button within each mode. IR Code Matrix Button Label Mode 1 Mode 2 Mode 3 Mode 4 Mode 5 Mode 6 1 Power Symbol 9 49 89 129 169 209 2 GUIDE 38 78 118 158 198 238 3 EXIT 37 77 117 157 197 237 4 MENU 31 71 111 151 191 231 5 INFO 39 79 119 159 199 239 6 L 32 72 112 152 192 232 7 M 33 73 113 153 193 233 8 K 34 74 114 154 194 234 9 A 35 75 11
Resumo do conteúdo contido na página número 11
Programming The MIO R-1 AUDIO IR Code Matrix (Cont.) Button Label Mode 1 Mode 2 Mode 3 Mode 4 Mode 5 Mode 6 41 S. REV Z 7 47 87 127 167 207 42 PLAY A 1 41 81 121 161 201 43 S. FWD Y 6 46 86 126 166 206 44 REW E 5 45 85 125 165 205 45 FWD D 4 44 84 124 164 204 Configuration Mode The configuration mode allows you to set the following device features: IR Transmit Mode (38 KHz or 455 KHz) Timeout Adjustment Download Mode Debug Mode Battery Type LED Awake Brightness Sleep Brightness To enter c
Resumo do conteúdo contido na página número 12
Programming The MIO R-1 AUDIO Debug Mode Pressing button "4" on the remote toggles development mode between ON and OFF. The display indicates the selected mode. In development mode, the display shows the IR code assigned to buttons when pressed. This mode is useful to the programmer when determining what IR codes are associated to each mode. Battery Type Pressing button "6" on the remote toggles the battery type between Normal and Recharge. The display indicates the selected type. The type o
Resumo do conteúdo contido na página número 13
Programming The MIO R-1 AUDIO Updating MIO R-1 AUDIO Firmware Updating firmware in the MIO R-1 AUDIO is also done through the programming jack. To update the main firmware for the MIO R-1 AUDIO: 1. Connect the MIO R-1 AUDIO to your computer via the programming jack (FIG. 3). 2. Put the device into Download mode, as shown on page 7. 3. Open NetLinx Studio. 4. Set the Master Communication Settings to Axcess Master and set the baud rate to 115200. 5. Go to Tools > Firmware Transfers > Send to Axce
Resumo do conteúdo contido na página número 14
Programming The MIO R-1 AUDIO Persistent Serial Commands There are a select number of persistent commands the MIO R-1 AUDIO recognizes. Establish a HyperTerminal session with your device to use the following commands: Serial Commands @BRT Set Brightness level Syntax: "'BRIT-,'" Variables: brightness level # = a value from 0 - 32. "'@BRT-#'" (Set LED Awake brightness level) "'@BRT-#,#'" (Set LED Awake brightness level, sleep brigh
Resumo do conteúdo contido na página número 15
MIO Remote Charging Base MIO Remote Charging Base The MIO remotes are complemented either with a MIO-RCC charging base (FG147-02) or the MIO-RCC rechargeable upgrade kit (FG147-03K). One charging base, a new back housing and a MIO-RBP rechargeable lithium ion battery (FG147-10) are included with the rechargeable upgrade kit. The charging base upgrade kit transforms the MIO R-1, R-2 and R-3 into a rechargeable device. Begin with Installing The Rechargeable Battery for the MIO-RCC rechargeable
Resumo do conteúdo contido na página número 16
MIO Remote Charging Base The specifications for the MIO remote charging base and kit are as follows: MIO-RCC Remote Charging Kit (FG147-03K) with Base (FG147-02) Specifications Dimensions (HWD) Charging Base - 1.61 (4.09 cm) (height); 4.25 (10.80 cm) (diameter) Lithium Ion Battery - 2.13” x 1.38” x .28” (5.41 cm x 3.45 cm x .71 cm) Weight • 1.15 lbs (.52 kg) - Remote Charging Cradle • .15 lbs (.07 kg) - Power Supply • .06 lbs (.027 kg) - Rechargeable Lithium Battery Included Items: • Rechargeab
Resumo do conteúdo contido na página número 17
MIO Remote Charging Base 5. Remove the back housing. 6. Place the new housing on the device so that the rechargeable battery port connection is now accessible. See FIG. 8. 7. Replace the 6 screws. 8. Connect the terminal end of the Lithium-Ion battery to the port shown in FIG. 8. It may be necessary to use a thin, blunt object to fully seat the battery connector within its port. Lithium Ion Battery Rechargeable Battery Port Connection FIG. 8 Rechargeable Battery Port on The MIO Remote 9. Pre
Resumo do conteúdo contido na página número 18
MIO Remote Charging Base Changing Battery Modes Configuration Mode The Configuration mode allows you to set the battery type. To enter Configuration mode: 1. Press and hold the STOP button and the INPUT button simultaneously. The two buttons must be pressed within 0.1 seconds of each other and held down for 2 seconds. The device indicates you are now in Configuration mode. Battery Type 2. Pressing button 6 on the remote toggles the battery type between Normal and Recharge. The display indicat
Resumo do conteúdo contido na página número 19
Using the MIO R-1 AUDIO Remote Using the MIO R-1 AUDIO Remote Tone Control & SRS Setting To access the Tone Control and SRS settings, press the TONE button (FIG. 1). This enables the Tone Control Mode with BASS as the first mode selected. TONE button FIG. 1 TONE button There are 3 Tone Control Modes available for adjustment, and 4 SRS options, as follows: BASS: Increase / Decrease from -10dB to +10dB (Up/Down NAV buttons) Treble: Increase / Decrease from -10dB to +10dB (Up/Down NAV buttons
Resumo do conteúdo contido na página número 20
Using the MIO R-1 AUDIO Remote Privacy Mode When the privacy feature is engaged, the room/zone cannot be paged, apart from this, the room/zone will function normally. To use the privacy feature in a specific zone, the keypad must be OFF (no sources selected) To engage Privacy mode, press the Privacy (PRIV) button. To disengage, press any Source or Navigation button. Privacy (PRIV) button FIG. 3 Privacy (PRIV) button Zone Control To turn a single Zone ON, press any Source button (or press
