Manual do usuário Radio Shack 15-2143

Resumo do conteúdo contido na página número 1

15-2143
Front Cover Art

Resumo do conteúdo contido na página número 2

Table of Contents Introduction Introduction ...................................................... 3 Thank you for buying this RadioShack Universal Setup ............................................................... 4 Remote Control. Installing Your batteries ................................ 4 Battery Saver ............................................... 4 Your remote control operates the common Code Saver ................................................. 4 features of most, but not all, model

Resumo do conteúdo contido na página número 3

Setup Setup, cont. Installing Your Batteries TV Volume/Mute Punch-Through Feature 1. On the back of the remote, The TV Volume/Mute punch-through feature lets you push down on the tab and control the Volume and Mute function of your TV in any lift off the cover. mode programmed to be a VCR, DVD, CABLE or SAT 2. Insert two AAA alkaline device, without needing to change to TV mode. batteries matching the polarity (+ and -) marked VCR/DVD Punch-Through Feature inside. 3. Replace the battery cover. P

Resumo do conteúdo contido na página número 4

Button Functions Button Functions, cont. Some buttons on the remote might have functions that are referred to by different names on the device you are controlling. E.G. PREV.CHAN may be called RECALL, or ENTER may be called DISPLAY. These differences depend on the brand and model of your product. Also, this CHANNEL UP/ POWER Turns VOLUME UP/ remote can only operate features that exist on your DOWN Changes product On or DOWN Changes product. E.G., your product must have PREV.CHAN the channels. O

Resumo do conteúdo contido na página número 5

Using the Advanced Functions Advanced Functions, cont. DVD Functions VCR/DVD Punch-Through Feature SCAN+ and SCAN- buttons control the speed of Fast This remote lets you Punch-through to the last VCR or Forward and Reverse Playback respectively. DVD device used. Normally other types of remotes only CHAPTER+ and CHAPTER- buttons respectively punch-through (from another Mode) on the 6 VCR locate the succeeding or preceding Chapters or Tracks buttons, to the device programmed under the VCR on a dis

Resumo do conteúdo contido na página número 6

Code Entry Code Entry, cont. Direct Code Entry Code Search 1. Press and hold the CODE SEARCH button until the If your product does not respond after you have tried all red indicator stays on, and then release the CODE the codes for your brand, or if your brand is not listed, SEARCH button. try searching for your code by following these steps. 2. Press and release the desired mode button (TV, VCR, 1. Manually turn on the device (TV, VCR, etc.) to be etc.). The red indicator blinks, and then stays

Resumo do conteúdo contido na página número 7

Code Entry, cont. Code Entry, cont. Searching Codes by Brand Brand Search Table Look up your brand in the appropriate column (TV, VCR, Lets you search for a code for a specific Brand within etc.). Look to see what digit (1, 2, 3, etc.) applies to your the Code Library for a particular manufacturer. brand, and enter it in step 4 of “Searching Codes by Brand” on the previous page. 1. Turn on the device (TV, VCR, etc.) to be controlled. 2. Press and hold the CODE SEARCH button until the red indicat

Resumo do conteúdo contido na página número 8

Code Identification Using the Sleep Timer The Sleep button accesses the sleep function of your Code Identification Feature TV if it has that feature. If it does not, you can enable the remote to turn off your TV after a period of 1 to 99 The Code Identification Feature allows you to identify minutes, as shown below. The remote must be in TV the three digit library code stored under your device key. mode to set a Sleep Timer. This feature works even if For example, if you want to find out what th

Resumo do conteúdo contido na página número 9

Product Operation Frequently Asked Questions After the batteries are installed and you have Remote does not operate your product. programmed the remote for the codes that operate your products, you can use your remote to operate a TV, VCR, • Press the mode button of the product you want to DVD Player, Cable Box, or Satellite System, etc. control. • Program the remote with a new code. • Install new batteries. (You might have to reprogram your remote after installing new batteries.) • Remote may n

Resumo do conteúdo contido na página número 10

Notes RadioShack Warranty RadioShack WARRANTS ITS PRODUCTS TO BE FREE FROM DEFECTIVE MATERIAL AND WORKMAN- SHIP FOR A PERIOD OF ONE 90 DAYS FROM THE ORIGINAL DATE OF PURCHASE AT RETAIL. RadioShack AGREES TO REPAIR OR REPLACE, AT ITS SOLE DISCRETION, A DEFECTIVE RadioShack PRODUCT IF RETURNED TO RadioShack WITHIN THE WARRANTY PERIOD AND WITH PROOF OF PURCHASE. IF SERVICE IS REQUIRED UNDER THIS W ARRANTY: RETURN THE DEFECTIVE UNIT TO THE STORE WHERE YOU PURCHASED IT. THIS WARRANTY DOES NOT EXTEND

Resumo do conteúdo contido na página número 11

15-2143 Back Cover Art