Manual do usuário JL Audio Stealthbox SB-N-370/10W3v3

Resumo do conteúdo contido na página número 1

SB-N-370/10W3v3 INSTR_SKU# 011306
Insa t llat Ion

d I F F I C u l t Y :

If you choose to perform the installation yourself, it is absolutely vital that
®
out
the Stealthbox be properly mounted to the vehicle according to these
o F
instructions. Failure to mount the enclosure properly presents two problems:
I n s t a l l a t I o n G u I d e
for the 1) The sub-bass performance will suffer due to the movement of the enclosure
15
caused by the force exerted by the woofer(s).
SB-N-370/

Resumo do conteúdo contido na página número 2

SB-N-370/10W3v3 INSTR_SKU# 011306 s t e P 4 S T E P 8 With both Allen Head Studs installed, put the carpet for the The “hooked end” of each of the Custom Brackets hooks rear area back into the car. onto the bottom edge of the plastic trim along the front of the hatch area of the car as shown. s t e P 5 S T E P 9 Locate the two studs by pressing down on the carpet while Once the brackets are installed, align them with the factory making sure that carpet remains centered. installed threaded b

Resumo do conteúdo contido na página número 3

SB-N-370/10W3v3 INSTR_SKU# 011306 I n C l u d e d H a R d W a R e s t e P 1 2 2) Custom Brackets 2) 5/16- x 3/4” Hex Head Bolt Secure the Stealthbox® to the vehicle using the supplied Hex 2) 5/16” Split Lock Washer 2) 5/16 Flat Washer Nut, Split Lock Washer, Flat Washer and Fender Washer on 2) 3/8-16 x 2-14” Allen Head Stud 2) 3/8-16 Speed Nut each Allen Head Stud as shown. Re-install the woofers in the 2) 3/8-16 Hex Nut 2) 3/8 Split Lock Washer Stealthbox® 2) 3/8 Flat Washer 2) 3