Manual do usuário JL Audio Stealthbox SB-T-TDCMAX/13TW5

Resumo do conteúdo contido na página número 1

SB-T-TUNDCMAX/13TW5 INSTR_SKU# 011266
Installat Ion

d I F F I C u l t Y :

If you choose to perform the installation yourself, it is absolutely vital that
®
out
the Stealthbox be properly mounted to the vehicle according to these
o F
instructions. Failure to mount the enclosure properly presents two problems:
I n s t a l l a t I o n G u I d e
for the 1) The sub-bass performance will suffer due to the movement of the enclosure
35
caused by the force exerted by the woofer(s).
SB-T-T

Resumo do conteúdo contido na página número 2

SB-T-TDCMAX/13TW5 INSTR_SKU# 011266 s t e P 4 S T E P 7 If installing two Stealthbox® enclosures, center the second Enlarge the 1/8" holes previously drilled step 3 and 4 enclosure between the first and the raised portion of the rear in the plastic trim to 3/8". panel. Repeat step 3 for the second enclosure. ***Please follow safe drilling procedures*** After the guide hole is drilled, enlarge the hole in the Stealthbox® to 3/8", this hole will eventually mount the enclosure. s

Resumo do conteúdo contido na página número 3

SB-T-TDCMAX/13TW5 INSTR_SKU# 011266 s t e P 1 1 S T E P 1 4 Reinstall rear interior metal panel, making sure the the bolt(s) Enlarge 1/8" hole drilled in step 5 through the metal panel to 3/8" as was done on the plastic panel. Repeat this step if that were installed in step 13 are facing forward. Use cau- tion so that the cable that was un-plugged in step 8 does installing second Stealthbox®. not get pinched between the removeable panel and the back of the cab. Plug the cable back in to

Resumo do conteúdo contido na página número 4

SB-T-TDCMAX/13TW5 INSTR_SKU# 011266 I n C l u d e d H a R d W a R e P e R s t e a l t H B o X ® S T E P 1 8 INTERIOR PLASTIC TRIM PANEL (1) 3/8-16 X 1 1/2" Hex Head Bolt REMOVEABLE INTERIOR This is a cross-sectional drawing showing the bolt from step REAR WALL STEALTHBOX® (3) 3/8 X 1 1/4" Fender Washer 13 also passing through the interior plastic trim panel and (2) 3/8" Split Lock Washer FENDER WASHER the Stealthbox®. The bolt then holds the Stealthbox® in place COMPLETED IN (2)