Manual do usuário JL Audio Stealthbox SB-J-UNLTD4DR/13TW5-3

Resumo do conteúdo contido na página número 1

SB-J-UNLTD4DR/13TW5 INSTR_SKU# 011276
Installat Ion

d I F F I C u l t Y :

If you choose to perform the installation yourself, it is absolutely vital that
®
out
the Stealthbox be properly mounted to the vehicle according to these
o F
instructions. Failure to mount the enclosure properly presents two problems:
I n s t a l l a t I o n G u I d e
for the 1) The sub-bass performance will suffer due to the movement of the enclosure
35
caused by the force exerted by the woofer(s).
SB-J-UN

Resumo do conteúdo contido na página número 2

SB-J-UNLTD4DR/13TW5 INSTR_SKU# 011276 s t e P 4 S T E P 7 Slide enclosure into place and press against the inner fender, Start the included hardware on the 3/8-16 Allen Head Stud. producing indentations in the wax squares where the studs There should be a 3/8x 1-1/2” Fender Washer, Split lock hit. Remove the enclosure. Washer and Hex Nut on the Allen Head Stud. (see illustration at ste P 9 for details). s t e P 5 S T E P 8 Notice the Inner Fender Liner Fasteners, all 12 of these fasten-

Resumo do conteúdo contido na página número 3

SB-J-UNLTD4DR/13TW5 INSTR_SKU# 011276 I n C l u d e d H a R d W a R e 2) 3”X 3” Wax Square 2) 3/8-16 x 2-1/4” Allen Head Stud 2) 3/8” x 1-1/4” Fender Washer 2) 3/8” Flat Washer 2) 3/8” Split Lock Washer 2) 3/8-16 Hex Nut s P e C I F I C a t I o n s Enclosure Type: Acoustic Suspension (sealed) Driver Type: 13TW5-3 Nominal Impedance: 3 Ohms Continuous Power Handling: 600 Watts RMS P o W e R R e C o m m e n d a t I o n JL Audio recommends using a high quality amplifier such as the JL Audi