Manual do usuário JL Audio Stealthbox SB-GM-CLREXT/10W3v3/TN

Resumo do conteúdo contido na página número 1

®
Stealthbox
INSTALLATION GUIDE START
HERE
for the
2
SB-GM-CLREXT/10W3v2
3
(2004-Up Chevrolet Colorado &
GMC Canyon Extended Cab)
1
STEP 1: Remove all contents from rear of STEP 2: Remove the plastic jack cover and STEP 3: Remove the (1) tire stops and with
truck. jack from the bracket. a 10mm socket, (2&3)unbolt the jack bracket.
This Stealthbox is a product which
requires professional installation skills and
tools.
Please read this installation guide thor-
oughly before beginning the proje

Resumo do conteúdo contido na página número 2

Cont. From Previous Page STEP 7: With the hardware from STEP 4. STEP 8: With the supplied hardware, attach the STEP 9: From under the truck, remove the heat From under neath, attach the Stealthbox to the jack bracket to the front of the Stealthbox. shield. bracket. Secure tightly using an open end wrench. Tap Bolt LOCK WASHER FLAT WASHER VEHICLE SHEET METAL FENDER WASHER FLAT WASHER HEX NUT STEP10: *CAUTION* STEP 11: Attache the jack bracket to the floor, STEP 12: On the back side of the plasti

Resumo do conteúdo contido na página número 3

Cont. From Previous Page CONGRATULATIONS! INSTALL COMPLETE. ➔➔ Included Hardware: 4) 1/4” Flat Washer 4) 1/4” Split Lock Washer 2) 1/4”-20 x 1” Bolts 2) #6 x 30mm-1mm Hex Bolts STEP 13: Place a supplied 3/4”Lx3/4”ODx3/8”ID STEP 14: On the back side of the plastic jack STEP 15: Place the tire stops and jack back onto 1) 3/8” Split Lock Washer spacer onto the thumb screw. cover. the jack bracket. 2) 3/8” Flat Washer 1) 3/8” Fender Washer Insert the thumb screw through the front of the Place the r