Manual do usuário JL Audio SB-T-4RNR2/10W3v3/GA

Resumo do conteúdo contido na página número 1

®
Stealthbox
INSTALLATION GUIDE START
HERE
B
3.5”
for the
2.5”
X
➔ ➔ ➔
SB-T-4RNR2/10W3v2
(‘02-Up Toyota 4-Runner SR-5, Sport
Edition & Limited)
A
STEP 1: Clean out all contents. Remove the STEP 2: Remove the rear sill plate(A) and side STEP 3: Place the supplied wax square into
cargo cover and carpet mat. storage door(B). position.
With the sill plate removed, pull and fold over the car- The middle of wax square (X marks the
pet out of the corner(circled). spot) needs to be 3.5” back from the w

Resumo do conteúdo contido na página número 2

Cont. From Previous Page B ➔ ➔ ➔ A STEP 7: Place the carpet that was pulled out of STEP 8: Remove the access door(A) and cargo STEP 8A: This is how the cleat looks when the corner in STEP 2, back into position. net cleat(B). installed into the side panel. (side panel not seen) Cut out an access hole in the carpet, that is lined up Follow STEPS 8A and 8B to properly remove Grab a hold of the exposed knob’s edge with your and position above the black metal plate’s hole, from the cargo net cleat. f

Resumo do conteúdo contido na página número 3

Cont. From Previous Page CONGRATULATIONS! INSTALL COMPLETE. ➔ ➔➔ ➔ STEP 11: Take the other supplied black metal STEP 12: Place the other black metal support STEP 13: Replace the carpet and any other con- plate, lock washer, flat washer and nut to the under plate, flat washer, lock washer and thread the nut tents back into cargo area. side of vehicle. onto the threaded rod. Use a 9/16” socket and long For cosmetics, we folded the corner of the carpet extension to fully secure the mounting assembl