Manual do usuário Extron electronic sLPVM-1

Resumo do conteúdo contido na página número 1

Low Profile VESA Mount Kit User Guide
Overview
® ®
Tongue Holes to Secure
The Extron Low Profile VESA Mount Kit (LPVM-1) allows
Plate 1 to Wall
monitors or Extron touch panels to be wall mounted to a two-gang
UL-certified junction box, a two-gang mud ring, or directly onto
any solid surface, such as brick, wood, masonry, or drywall. The kit
supports both the B-type (20 x 50 mm) and D-type (75 x 75 mm)
Bottom Tabs (2)
VESA mounting patterns. The monitor attaches to the wall at a fixed
angle

Resumo do conteúdo contido na página número 2

Low Profile VESA Mount Kit User Guide (Continued) Mounting the LPVM-1 to a Mud Ring or UL-Certified Junction Box in Drywall: NOTE: See the caution on previous page about weight restrictions. a. Follow the instructions provided by the manufacturer to cut the hole and install the mud ring or junction UL-certified box. 2-gang Wall Box b. Attach plate 1 to the mud ring or junction box, using the four #6-32 screws provided. Ensure the tongue is facing upwards. c. Connect conduit to the junction