Manual do usuário Dynex DX-TVM111

Resumo do conteúdo contido na página número 1

Option 2: Installing to a concrete wall
1 Attach the TV bracket
1 Level the wall plate (A) and mark the hole locations.
NOTE: Make sure there will be enough space between the back of the TV and
2 Drill the pilot holes as illustrated.
the wall to connect all your cables.
3 Insert the concrete wall anchors into the pilot holes and make sure that
You can use the optional M4 spacers to provide additional space.
the anchors (H) are seated flush with the surface.
Without spacers: Attach th

Resumo do conteúdo contido na página número 2

3 Mount the TV to the wall 4 Lock the TV to the wall plate Place the TV bracket into the slotted flanges of the wall plate. The TV Slide the locking bar (C) through the TV bracket (B) and the wall plate (A) to can be mounted either (1) vertically or (2) with a 5-degree tilt. secure the TV. A padlock (not included) may be used for extra security. IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS HEAVY! You will need CAUTION: Do not use this product for any purpose not explicitly assistan