Manual do usuário JBL P650c

Resumo do conteúdo contido na página número 1

component
systems
owner’s
manual
THANK YOU
®
for purchasing a JBL Power Series
automotive loudspeaker component
system. We’ve organized this manual
to make your installation as simple and
trouble-free as possible. Please read it
thoroughly before proceeding. Remember
to keep your sales receipt and this manual in a
safe place so both are available for future reference.

Resumo do conteúdo contido na página número 2

INSTALLATION WARNINGS AND TIPS INSTALLATION ABOUT THESE REAR DECK •At the installation sites, locate Figure 1. Mounting the P550c woofer Figure 3. Mounting the P650c in a INSTRUCTIONS PRECAUTION and make a note of all fuel lines, with the grille. standard 6" opening. Installation of automotive stereo com- In some cars, fuel tanks may be hydraulic brake lines, vacuum lines NOTE: The P650c uses an adapter to ponents can require extensive experi- located directly beneath the rear and electrical wir

Resumo do conteúdo contido na página número 3

INSTALLATION CONNECTIONS Figure 5. Mounting the tweeter using Open the crossover housing by firmly squeezing the sides The Power Series component crossover features a 4) the I-Mount flush-mounting kit. of the top half and lifting it away from the bottom. Using tweeter-level adjustment. The tweeter level may be set to screws or a wire tie, mount the crossover using the holes 0dB (flat response), or it may be attenuated by approxi- – provided. Observing proper polarity, connect the speakers mate

Resumo do conteúdo contido na página número 4

SPECIFICATIONS P550c P650c Type: 5-1/4" two-way component system 6-1/2" two-way component system Speaker Impedance: 4 ohms 4 ohms Power Handling: 70W RMS, 210W Peak 90W RMS, 270W Peak Sensitivity (2.83V, 1m): 89dB 90dB Frequency Response: 55Hz – 23kHz 45Hz – 23kHz Mounting Depth: 2-3 ⁄16" (56mm) 2-1/4" (58mm) Cut-Out Diameter: 4-11/16" (120mm) 5-1/16" (129mm) GENERAL CARE The loudspeaker grilles may be cleaned with a damp cloth. Do not use any cleaners or solvents on the grilles or the speaker