Manual do usuário Winegard RP80RTS

Resumo do conteúdo contido na página número 1

Stationary Electronics Replacement Kit
Model RP80RTS
For help, email help@winegard.com or call 1-800-788-4417.
For receivers and programming, call 1-866-609-9374.
For up-to-date information on receiver compatibility and
programming, visit www.winegard.com/receivers.
2452280

Resumo do conteúdo contido na página número 2

Parts of the Antenna Removing the Existing Installing the Replacement Overhead View (Dome Removed) Stationary Electronics Box Stationary Electronics Box Reflector Cable harness 1 1. 1. Before starting, turn off the power to the unit, Insert the second (larger) motor connection and unplug the unit from the receiver. into the port underneath “P4 ELEVATION” on Cable harness 2 the replacement stationary electronics box. 2. Using a #2 Phillips screwdriver, remove the LNB Cable harness 3 screws ho

Resumo do conteúdo contido na página número 3

Routing Cables through Re-Installing the Dome the Four Cable Harnesses 1. Replace the dome. 1. Route the two coaxial cables underneath 2. Align the holes in the base with the holes in “LNBF” and “RECEIVER” through cable the dome. If installing a handle, align the holes harness 1. in the handle with the holes in the base. To protect the cable connections from accidental 2. Route the cable running from “RECEIVER” damage, install the handle using the two holes and the cable running from th