Resumo do conteúdo contido na página número 1
Professional Disc Jockey Products
TT-1520
Direct-Drive Turntable
USER’S MANUAL
©2000 Industries http://www.numark.com
Resumo do conteúdo contido na página número 2
TT1520 8. Power Sources - This product should be connected to a Safety Information power supply only of the type described in these operating instructions, or as marked on the unit. 9. Power Cord Protection - Power supply cords should be routed so that they are not likely to be walked upon or pinched by items placed on or against them. When removing the cord from a power outlet be sure to remove it by holding the plug attachment and not by pulling on the cord. 10. Object and Liq
Resumo do conteúdo contido na página número 3
TT1520 TT-1520 PROFESSIONAL DIRECT-DRIVE TURNTABLE CONGRATULATIONS! You have just purchased the Numark TT1520 Professional Direct Drive Turntable. This unit has been design to provide years of reliable operation in an easy to use design. Thank you for purchasing a Numark Product and enjoy the mix...... TABLE OF CONTENTS Safety Information Page 2 Contents of this package Product Registration 1. Main Unit 1 Introduction Page 3 2. Turntable platter 1 3. Turntable mat 1 4. Dust cover 1 Diagram an
Resumo do conteúdo contido na página número 4
TT1520 PARTS DESCRIPTION 1. 45-rpm Adapter 10. Headshell 2. Anti-static slip mat 11. Pitch Control Slider 3. Center Spindle 12. Tonearm 4. Stroboscope 13. Arm Rest 5. Start/Stop Button 14. Cueing Lever 6. Speed Select Button 15. Anti-skating Knob 7. Strobe Dots 16. Counterweight 8. Adjustable Feet 17. Hinge For Dust Cover 9. Power Button ASSEMBLY 1. Remove the main unit with the packing from the box and take off the packing material. DO NOT DISCARD ANY PACKING MATERIAL. The headshell, counterw
Resumo do conteúdo contido na página número 5
TT1520 4. Insert the turntable platter onto the center spindle. CENTER SPINDLE 5. Set the turntable mat on the platter. 6. Installing the cartridge: When installing a cartridge, refer to the operating instructions of that cartridge. During installation, attach the stylus protector to guard the stylus tip from damage. If you have purchased a unit with the cartridge included, then that cartridge is already installed on the headshell (You may skip to line 8). a. Connect the lead wires to the car
Resumo do conteúdo contido na página número 6
TT1520 9. Adjustment of horizontal zero (O) balance with stylus pressure and anti-skating : a. Remove the stylus protector. Do not touch the stylus tip during the adjustment. b. Set the cueing lever to the lower position so it does not effect tone arm height. c. Release the arm clamp and lift the tonearm from the armrest so it moves freely. d. Rotate the counterweight until the tonearm is approximately balanced horizontally (floats freely). e. Refasten the tonearm with the arm clamp. f. Hold th
Resumo do conteúdo contido na página número 7
TT1520 OPERATING INSTRUCTIONS 1. Push the power button to turn on the power. The speed indicator and the strobe-illuminator will light up. 2. Place a record on the turntable mat. When playing a 45rpm record with a large center hole, place the 45-rpm adapter on the center spindle. 3. Set the rotation speed (33/45) to match the record. 4. Remove the stylus protector and release the arm clamp. 5. Set the cueing lever to the up position. 6. Press the Start/Stop button. The turntable platter will st
Resumo do conteúdo contido na página número 8
Professional Disc Jockey Products LIMITED PRODUCT WARRANTY What is covered and for how long? 1. NUMARK INDUSTRIES LCC ("NUMARK") warrants to the original purchaser that NUMARK'S DJ mixers and amplifiers are free from defects in material and workmanship under normal use and service for the period commencing upon the date of purchase from an authorized NUMARK dealer and continuing for the following period of time after that date for (2) Years. The warranty is extended to (3) Years with the comple
