Resumo do conteúdo contido na página número 1
SRTZ2610/SRTZ2610F/LRTZ2610
848A3393A0 (801)
G G
B B
OWNER’S MANUAL
SHORT REACH TRIMMER
LONG REACH TRIMMER
SRTZ2610
SRTZ2610F
LRTZ2610
GB-1
Resumo do conteúdo contido na página número 2
SRTZ2610/SRTZ2610F/LRTZ2610 EC DECLARATION OF COMFORMITY We, Husqvarna Zenoah Co., Ltd. 1-9, Minamidai, Kawagoe, Saitama, Japan declare in sole responsibility that the following products referred to in this declaration conform with DIRECTIVE 98/37/EC, prEN774 of 5th April 1994. The products referred are : DESIGNATION : SHORT REACH TRIMMERS/LONG REACH TRIMMERS MODELS : SRTZ2610/SRTZ2610F /LRTZ2610 SERIAL NUMBERS : 80100101 and up The company named above will keep on file the following technical d
Resumo do conteúdo contido na página número 3
SRTZ2610/SRTZ2610F/LRTZ2610 SAFETY FIRST Contents Instructions contained in warnings within this manual marked with a symbol concern critical points which must be taken into consideration to prevent possible serious bodily injury, and 1. Parts location .................................................. 3 for this reason you are requested to read all such instructions 2. Specifications ................................................. 4 carefully and follow them without fail. G 3. Warning label
Resumo do conteúdo contido na página número 4
SRTZ2610/SRTZ2610F/LRTZ2610 2. Specification SRTZ2610 LRTZ2610 Model SRTZ2610F 1725 x 400 x 365 2300 x 400 x 365 Overall size (LxWxH) mm 1734 x 338 x 254 6.4 6.6 Dry weight * kg 6.5 Engine Type Air-cooled 2-stroke gasoline Model Zenoah GZ25N -1 Max output rpm 1.2Hp (0.9kW) at 7500min -1 Idle speed rpm 3000±200min 3 Displacement cm 25.4 Fuel Mixture (Gasoline 50 : Oil 1) (when using ZENOAH genuine oil) Carburetor Walbro Diaphragm type Spark plug NGK CMR7A Fuel tank capacity L 0.65 Transmissi
Resumo do conteúdo contido na página número 5
SRTZ2610/SRTZ2610F/LRTZ2610 5. For safe operation b. At night, at times of heavy fog, 1. Read this manual carefully until or at any other times when you completely understand and your field of vision might be follow all safety and operating limited and it would be diffi- instructions. cult to gain a clear view of the 2. Keep this manual handy so that G working area. you may refer to it later when- B c. During rain storms, during ever any questions arise. Also lightning storms, at times of note
Resumo do conteúdo contido na página número 6
SRTZ2610/SRTZ2610F/LRTZ2610 5. For safe operation BEFORE STARTING WARNING THE ENGINE 1. The area within a perimeter of Never place the throttle into the 15 m (50 ft) of the person using high-speed position when starting the product should be considered the engine. a hazardous area into which no one should enter. If necessary, 3. After starting the engine, check yellow warning rope, warning to make sure that the cutting at- signs should be placed around tachment stops moving when the the peri
Resumo do conteúdo contido na página número 7
SRTZ2610/SRTZ2610F/LRTZ2610 5. For safe operation • IF SOMEONE COMES HANDLING FUEL 1. Guard against hazardous situa- 1. The engine of the ZENOAH prod- tions at all times. Warn adults to uct is designed to run on a mixed keep pets and children away from fuel, which contains highly flam- the area. Be careful if you are ap- mable gasoline. Never store cans G proached. Injury may result from of fuel or refill the tank of the unit B flying debris. in any place where there is a 2. If someone calls o
Resumo do conteúdo contido na página número 8
SRTZ2610/SRTZ2610F/LRTZ2610 6. Set up MOUNTING ENGINE ATTACHING THE TRIMMING MECHANISM 1. Push the shaft tube toward the clutch housing and move 1. Remove the cap on the end of the main pipe. it by hand to check that the drive shaft is engaged with 2. Remove the screw screwed into the end of the trim- the gears. ming mechanism. 2. Insert the shaft tube into the clutch housing until it bot- 3. Insert the end of the trimming mechanism into the main toms, and align the positioning holes on the clut
Resumo do conteúdo contido na página número 9
SRTZ2610/SRTZ2610F/LRTZ2610 7. Fuel ■ FUEL 3. Pour in all of the oil and agitate well. 4. Pour in the rest of gasoline and agitate again for at least one minute. As some oils may be difficult to WARNING agitate depending on oil ingredients, sufficient agi- tation is necessary for the engine to last long. Be • Gasoline is very flammable. Avoid smoking or careful that, if the agitation is insufficient, there is an bringing any flame or sparks near fuel. Make sure G increased danger of early pist
Resumo do conteúdo contido na página número 10
SRTZ2610/SRTZ2610F/LRTZ2610 8. Operation STARTING ENGINE IMPORTANT WARNING Avoid pulling the rope to its end or returning it by releas- ing the knob. Such actions can cause starter failures. The cutting head will start moving upon the engine starts. 6. Move the choke lever downward to open the choke. And restart the engine. 1. Rest the unit on a flat, firm place. Keep the cutting 7. Allow the engine to warm up for a several minutes head off the ground and clear of surrounding objects before
Resumo do conteúdo contido na página número 11
SRTZ2610/SRTZ2610F/LRTZ2610 8. Operation ADJUSTING IDLING SPEED resulting in injuries, scratches, and cuts, and for this 1. When the engine tends stop frequently at idling mode, reason you should always be sure to wear a helmet turn the adjusting screw clockwise. and face protector when using your trimmer. 2. When the cutting head keeps moving after releasing the trigger, turn the adjusting screw counter-clockwise. G NOTE B • The thickness of branches which may be cut using this trimmer is li
Resumo do conteúdo contido na página número 12
SRTZ2610/SRTZ2610F/LRTZ2610 9. Maintenance MAINTENANCE CHART Every Every Every 25 50 100 Before System/components Procedure Note hours hours hours use after after after fuel leaks, fuel spillage wipe out ✔ fuel tank, air filter, fuel filter inspect/clean ✔✔ replace, if necessary see adjusting replace carburetor idle adjusting screw ✔ idling speed if necessary clean and readjust GAP: .025 in (0.6 ~ 0.7 mm) spark plug ✔ plug gap replace, if necessary cylinder fins,
Resumo do conteúdo contido na página número 13
SRTZ2610/SRTZ2610F/LRTZ2610 9. Maintenance 9. Maintenance WARNING IMPORTANT Make sure that the engine has stopped and is cool • Note that using any spark plug other than those des- before performing any service to the machine. Con- ignated may result in the engine failing to operate tact with moving cutting head or hot muffler may re- properly or in the engine becoming overheated and G sult in a personal injury. damaged. B •To install the spark plug, first turn the plug until it is AIR FILTER
Resumo do conteúdo contido na página número 14
SRTZ2610/SRTZ2610F/LRTZ2610 9. Maintenance INTAKE AIR COOLING VENT PROCEDURES TO BE PERFORMED AFTER EV- ERY 100 HOURS OF USE WARNING 1. Remove the muffler, insert a screwdriver into the vent, •Never touch the cylinder, muffler, or spark plugs and wipe away any carbon buildup. Wipe away any with your bare hands immediately after stopping carbon buildup on the muffler exhaust vent and cylin- the engine. The engine can become very hot when der exhaust port at the same time. in operation, and doin
Resumo do conteúdo contido na página número 15
SRTZ2610/SRTZ2610F/LRTZ2610 12. Troubleshooting guide Case 1. Starting failure CHECK PROBABLE CAUSES ACTION fuel tank → incorrect fuel → drain it and use correct fuel fuel filter → fuel filter is clogged → clean carburetor adjustment screw → out of normal range → adjust to normal range G sparking (no spark) → spark plug is fouled/wet → clean/dry B → plug gap is incorrect → correct (GAP: 0.6 ~ 0.7 mm) spark plug → disconnected → retighten Case 2. Engine starts but does not keep running/hard re-st
