Manual do usuário Eureka! Tents Pine Lodge

Resumo do conteúdo contido na página número 1

3. Continue with the remaining three roof poles
5. Raise the tent. Start on one side and insert
and main pole on the opposite side to
gray wall poles into the elbows. Locate the web
complete the roof assembly.
Assembly Instructions for
ring/pins attached to the floor of the tent. Insert
See fig 5.
a pin into the base of each pole. See fig 9 & 10.
the Pine Lodge Tent
Repeat on the other side until the tent is at full
fig 5
height and freestanding.
Component List:
fig 10
1 Tent Body wit

Resumo do conteúdo contido na página número 2

Make sure that all corners are square. It is important that you don’t It is important to vent the vestibule. Unvented, it can inhibit airflow into the ALTERATIONS OR MODIFICATIONS: stake the tent out too tightly. You will know it’s too tight, if the door tent. Our tent vestibules profit from the ability to “short sheet” by means of DO NOT misuse, modify or alter this product in any way from its condition at the zippers can not be easily operated. Drive stakes through the web loops, zippers & togg