Resumo do conteúdo contido na página número 1
User’s manual
Part 2
Big button telephone 929
Resumo do conteúdo contido na página número 2
Congratulations on your purchase of this AT&T product. Before using this AT&T product, please read the Important product information (Part 1). Please thoroughly read this user’s manual for all the feature operations and troubleshooting information necessary to install and operate your new AT&T product. You can also visit our website at www.telephones.att.com or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268. Model #: 929 Serial #: Purchase date: Place of purchase: Both
Resumo do conteúdo contido na página número 3
Table of contents Before you begin Telephone memory Parts checklist ..........................2 Directory card ........................ 11 Store a number in Installation memory ................................. 11 Table/desk installation ........3 Store a pause in a Wall installation ......................5 memory number ............... 12 Dial a number in a Telephone operation one-touch memory .......... 12 Make a c
Resumo do conteúdo contido na página número 4
Before you begin Parts checklist Your telephone contains the following items. Save your sales receipt and original packaging in the event warranty service is necessary. Telephone line cord User's manual User’s manual Part 2 Handset coiled cord Mounting bracket Telephone base unit Handset 2
Resumo do conteúdo contido na página número 5
Installation Installation Table/desk installation 1. Install the desk/table bracket to the upper portion on the telephone base. Plug the tabs on the bracket into the slots on the telephone base until they click into place. 2. Install batteries to provide power for the AUDIO ASSIST, MUTE and lights. Press the battery cover tabs and remove the cover. Install three new alkaline AA batteries (not included). Make sure to follow the polarity guide in the battery compartment. Replace the cover.
Resumo do conteúdo contido na página número 6
Installation 3. Set the tone/pulse switch. If you have touch tone service, set the switch to TT (tone). If you have dial pulse (rotary) service, set the switch to DP (pulse). Tone/pulse switch 4. Connect the handset to the telephone. Plug the handset coiled cord into the handset jack on the left side of the telephone base. Plug the other end of the handset coiled cord into the handset, then hang up. 5. Connect the telephone line cord to the telephone. Plug the telephone line cord into the
Resumo do conteúdo contido na página número 7
Installation Wall installation 1. Install the wall bracket to the lower portion on the bottom of the telephone base. Plug the tabs on the bracket into the slots on the telephone base until they click into place. 2. Install batteries to provide power for the AUDIO ASSIST, MUTE and lights. Press the battery cover tabs and remove the cover. Install three new alkaline AA batteries (not included). Make sure to follow the polarity guide in the battery compartment. Replace the cover. NOTE: The b
Resumo do conteúdo contido na página número 8
Installation 3. Set the tone/pulse switch. If you have touch tone service, set the switch to TT (tone). If you have dial pulse (rotary) service, set the switch to DP (pulse). 4. Connect the telephone line cord to the telephone. Plug the telephone line cord into the jack labeled LINE IN and route it into the groove on the telephone base as shown below. If you subscribe to high-speed internet service (Digital Subscriber Line - DSL) through your telephone line, you must have a DSL filter bet
Resumo do conteúdo contido na página número 9
Installation 5. Reverse the handset tab. This tab holds the handset when you hang up. Hold down the switchhook and slide the tab up and out of its slot. Turn the tab so that the end with the hook is up. Then hold down the switchhook while you insert the tab back into its slot. Switchhook Handset tab 6. Connect the handset to the telephone. Plug the handset coiled cord into the handset jack on the left side of the telephone base. Plug the other end of the handset coiled cord into the hands
Resumo do conteúdo contido na página número 10
Telephone operation Telephone operation Make a call 1. Lift the handset or press . 2. When you hear a dial tone, dial the number you wish to call using the dial pad or memory buttons. Answer a call When the telephone rings and the ringing indicator flashes, lift up the handset or press to answer the incoming call. End a call Replace the handset in the cradle on the telephone base or press while in speakerphone mode. Ringing indicator The ringing indicator flashes when there is an incom
Resumo do conteúdo contido na página número 11
Telephone operation Redial The last number dialed is stored in the redial memory. To dial that number, lift the handset or press to listen for a dial tone, then press REDIAL/PAUSE. The number is dialed automatically. NOTE: Redial memory can store up to 32 digits. If the last number dialed is longer than 32 digits, it will not be stored. Erase a redial You can erase the redial memory for privacy. Lift the handset, then press PROG. Press REDIAL/PAUSE and then hang up. -OR- Lift the hands
Resumo do conteúdo contido na página número 12
Telephone operation Handset volume Slide HS VOL (handset volume) on the telephone base to adjust the volume of what you hear through the handset. Slide the control downward to decrease or upward to increase the volume. Ringer volume Slide RINGER on the right side of the telephone to adjust the ringer volume to a comfortable level. Slide the button to OFF to silence the ringer. Slide the button to increase or decrease the ringer volume. Speakerphone volume Slide SPK VOL (speakerphone volu
Resumo do conteúdo contido na página número 13
Telephone operation Telephone memory This telephone can store 13 telephone numbers, each up to 16 digits. You can dial numbers stored in memory by pressing one or two buttons. Directory card Lift the plastic cover off the directory card to write down the numbers and names which are stored in the telephone memory on the card. Then replace the cover. Store a number in memory 1. Lift the handset or press . 2. Press PROG. 3. Dial the telephone number (up to 16 digits). 4. Press PROG. 5. Pres
Resumo do conteúdo contido na página número 14
Telephone operation Store a pause in a memory number Press REDIAL/PAUSE once to store a three to four second pause in the dialing sequence. Each additional press will add another three to four second pause. NOTE: Each three to four second pause is counted as one digit when storing numbers in the telephone memory. Dial a number in a one-touch memory To dial a number stored in memory locations , or : 1. Lift the handset or press and wait for a dial tone. 2. Press the memory button ( , o
Resumo do conteúdo contido na página número 15
Appendix General product care To keep your telephone working and looking good, follow these guidelines: • Avoid putting it near heating appliances and devices that generate electrical noise (for example, motors or fluorescent lamps). • DO NOT expose it to direct sunlight or moisture. • Avoid dropping the telephone and/or other rough treatment. • Clean with a soft cloth. • Never use a strong cleaning agent or abrasive powder because this will damage the finish. • Retain the original packaging
Resumo do conteúdo contido na página número 16
Appendix Troubleshooting If you have difficulty with your telephone, please try the suggestions below. For Customer Service, visit our website at www.telephones.att.com, or call 1 (800) 222-3111. In Canada, call 1 (866)288-4268. • Make sure all plugs are connected No dial tone properly. Inspect the line cord connections at the modular jack and at the telephone. Also inspect the telephone handset cord connections at both ends. • Unplug the telephone and connect it to another modular jack.
Resumo do conteúdo contido na página número 17
Appendix Troubleshooting • Make sure you have installed three fully Backlight of charged AA batteries (not included) AUDIO ASSIST, following the polarity guide in the battery MUTE or compartment. See Installation on page 3 of is dim or not this user's manual. functioning • The backlight may not be noticeable unless the room is dark. Cannot store • Make sure you are pressing the correct telephone sequence of buttons when storing numbers numbers in (see pages 11 and 12). memory Memory
Resumo do conteúdo contido na página número 18
Appendix Technical specifications REN 1.5B Three AA batteries are required for Power backlighting of the AUDIO ASSIST, MUTE and lights. The telephone must also be connected to a telephone line for all features to work. + Line feed voltage 48V /- 2V Line loop current 18mA to 100mA Ringer levels Off = 0dB HI = 85dB Compliance FCC and UL approved Memory One-touch memory: 3 memory locations, 16 digits per location Two-touch memory: 10 memory locations, 16 digits per location 16
Resumo do conteúdo contido na página número 19
Appendix Index A O Answer a call 8 One-touch memory 12 Audio assist 10 P B Pause 12 Batteries 3, 5 R D Redial 9 Directory card 11 Ringing indicator 8 Ringer volume 10 E End a call 8 S Erase redial 9 Speakerphone 8 F T Flash 9 Temporary tone dialing 9 Tone/pulse switch 4, 6 Troubleshooting 14 H Two-touch memory 12 Handset tab 7 Handset volume 10 V Volume 10 M Make a call 8 Memory 11 Mute 8 N No dial tone 14 17
Resumo do conteúdo contido na página número 20
www.telephones.att.com © 2007 Advanced American Telephones. All rights reserved. AT&T and the AT&T logo are trademarks of AT&T Intellectual Property II, L.P. d/b/a AT&T Intellectual Property licensed to Advanced American Telephones. Printed in China. Issue 2 AT&T 12/07.
