Resumo do conteúdo contido na página número 1
Model V10
Mobile Satellite TVAntenna
with FastFind Remote
Installation and
Operating Manual
MADE IN THE U.S.A.
1. INTRODUCTION ...........................................................................2
2. BACKGROUND .............................................................................3
3. COMPONENT OVERVIEW and SPECIFICATIONS......................4
4. FCC USER’S INFORMATION .......................................................5
5. INSTALLATION.........................................
Resumo do conteúdo contido na página número 2
Introduction Congratulations on your purchase of the Vu Qube V10. The Vu Qube V10 is equipped with a FastFind remote enabling you to quickly position the Vu Qube antenna from inside your vehicle. The Vu Qube V10 is compatible with any ® ® ® service provider including DIRECTV , DISH Network or Bell ExpressVu. This manual includes: The satellite broadcast market is continually changing and expanding. The information in this manual was accurate at the time of printing. If th
Resumo do conteúdo contido na página número 3
Background Satellites used for television signals are 22,300 miles (37,000 km) above the earth’s equator. The purpose of the Vu Qube is to acquire the signal traveling that great distance and transmit the signal to the digital receiver in your vehicle, so you can watch TV anywhere you park. Satellite television, like other communications relayed by satellite, starts with a transmitting antenna located at an uplink facility on Earth. The uplink dish is pointed toward a specific satellite and
Resumo do conteúdo contido na página número 4
Vu Qube V10 Component Overview Manual Quick Reference Guide Vu Qube Antenna Vu Qube FastFind Remote RG6 Coaxial Cable (20 ) Mounting Kit (Purchased Separately) Kit shown is Model Number 31100 ***You will need to supply your own fasteners to attach a Vu Qube bracket to your vehicle. Depending on the cab material, fasteners such as lag screws, well nuts, sheet metal screws, toggle bolts and T anchors may be used; fasteners should always be used in combination with compatible sealant to environ
Resumo do conteúdo contido na página número 5
FCC User Information Main Components Vu Qube V10 Antenna Vu Qube V10 Remote Part #: VQV10 Part #: VQV10R FCC ID: UUM10156V10 FCC ID: UUM10157V10 IC: 6873A -10156V10 IC: 6873A -10157V10 This device complies with Part 15 of This device complies with Part 15 of the the following two conditions: following two conditions: 1) This device 1) This device must not cause harmful must not cause harmful interference, and interference, and 2) This device must 2) This device must accept interferen
Resumo do conteúdo contido na página número 6
Installation Overview of Installation coaxial cable. of the top cover above the highest point of the cab or air shield (Figure 1) and away from interfering objects like smoke stacks. receiver. Figure 1. It is recommended to have a minimum of 4 of the VuQube above the highest point on the cab, including the air shield. It is also recommended to be as far away as possible from any object that may obstruct direct line of sight of the antenna to the southern sky. Such in
Resumo do conteúdo contido na página número 7
Installation (continued) Mounting the bracket and selecting location to run wiring using Mounting Bracket Kit part number 31100. This Mounting Bracket Kit and others were designed specifically to mount the Vu Qube to the back of a truck cab. Please contact Wallace Technologies, LLC (866-802-2228) regarding other bracket options. 1. Select and mark both area on back of cab to mount the bracket AND location to run coaxial cable from the Vu Qube to the inside of the cab. coax
Resumo do conteúdo contido na página número 8
Installation (continued) 2. Drill holes for mounting bracket with proper size depending on fasteners used. The installer is responsible for determining the most appropriate fastener to secure the bracket to the cab. Depending on the cab material, fasteners such as lag screws, well nuts, sheet metal screws, toggle bolts and T anchors may be used. Fasteners should always be used in combination with compatible sealant to environmentally seal the holes after installation. 3. Mount bracket to
Resumo do conteúdo contido na página número 9
Installation (continued) Wiring 1. Connect 20 coaxial to Vu Qube. 2. Pass 20 coaxial cable through hole previously drilled. It is an option to run the wiring down the back of the cab and up into the cab through an access bay. 3. Connect coaxial cable from Vu Qube to SATELLITE IN port on satellite receiver. 4. Make sure satellite receiver is connected to TV per manufacturer’s instructions. Vu Qube 9 V10-6/1007
Resumo do conteúdo contido na página número 10
Vu Qube V10 Operation SOUTHERN SKY REQUIRED. Physical obstruction (i.e., smoke stacks, buildings, trees, telephone poles, etc.) can block the satellite signal from reaching the antenna. If you experience difficulty contact (866) 802-2228. Finding the Satellite and Acquiring a Signal 1. Determine Dish Elevation -or- Use Quick Reference Maps to estimate Elevation 2. Position Antenna to proper 37° on Vu Qube Remote. This number indicates Elevation Choose transpon
Resumo do conteúdo contido na página número 11
Satellite Position Memory TO STORE POSITION: Hold down either the Satellite 1 or Satellite 2 button for at least 2.5 seconds. The LCD will show “P1” or “P2” when button is released. TO RECALL POSITION: Hold down either the Satellite 1 or Satellite 2 button for less than 2.5 seconds. The LCD will show “r1” or “r2”. TO CANCEL RECALL: Press any arrow button to stop moving to a stored position. Troubleshooting If you cannot lock on to the correct satellite, it is most likely that an object is
Resumo do conteúdo contido na página número 12
Maintenance The Vu Qube has been designed to be maintenance and trouble free. For optimum signal strength, keep the cover clean from dirt, bugs, and other debris. Periodic washing of the top cover with mild soap and water is recommended. If you plan on storing your vehicle for long periods of time, it is recommended that the system be put through a search procedure on a quarterly basis to keep all moving parts in good working order. If you have any comments or questions, please contact Wa
