Manual do usuário Dell 0TF663A00

Resumo do conteúdo contido na página número 1

Setting Up Your Powered USB Hub
CAUTION:
TM
Before you set up and operate your Dell hub, see the
safety instructions in the Product Information Guide
This placemat is only intended for quick reference.
Consult your Product Information Guide for complete details
(a)
1 2 3 4
(b)
1
Unpack your Powered USB Hub If Integrator is used, remove cover from Integrator (a)
1 2
and slide tray out (b)
1. Port LEDs (6)
2. Status LED
3. Host LED
4. Service Tag Label
1 2
(a)
4
5
3
(b)
6
If Integrator is use

Resumo do conteúdo contido na página número 2

2 Connect one AC pass-through power cord to hub and Connect USB cable to hub and Host PC Connect peripheral cables to peripherals and then 5 6 7 Host PC. Connect other AC pass-through power cord hub when hot-plugging. NOTE: This order must be to hub and monitor. observed or damage may result to peripherals NOTE: Do not connect AC pass-through connectors and/or hub to other devices without checking the Product Information Guide (b) (Windows XP) (a) (Windows 2000) Turn power switch on. Ensure