Resumo do conteúdo contido na página número 1
WORKGROUP
REMOTE ACCESS SWITCH
EXAMPLE NETWORKS
Release 7.2
Cabletron Systems
(603) 332-9400 phone
(603) 337-3075 fax
support@ctron.com
Resumo do conteúdo contido na página número 2
EXAMPLE NETWORKS Only qualified personnel should perform installation procedures. ! CAUTION NOTICE You may post this document on a network server for public use as long as no modifications are made to the document. Cabletron Systems reserves the right to make changes in specifications and other information contained in this document without prior notice. The reader should in all cases consult Cabletron Systems to determine whether any such changes have been made. The hardware, firmware, or soft
Resumo do conteúdo contido na página número 3
TRADEMARKS Cabletron Systems, CyberSWITCH, MMAC-Plus, SmartSWITCH, SPECTRUM, and SecureFast Virtual Remote Access Manager are trademarks of Cabletron Systems, Inc. All other product names mentioned in this manual are trademarks or registered trademarks of their respective companies. COPYRIGHTS All of the code for this product is copyrighted by Cabletron Systems, Inc. © Copyright 1991-1997 Cabletron Systems, Inc. All rights reserved. Printed in the United States of America. Portions of the code
Resumo do conteúdo contido na página número 4
EXAMPLE NETWORKS WARNING: Changes or modifications made to this device which are not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. DOC NOTICE This digital apparatus does not exceed the Class A limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications. Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limit
Resumo do conteúdo contido na página número 5
CONTENTS Simple Remote Bridging Network 9 Overview 9 Initial Installation Steps 9 Configuring the Simple Remote Bridge 9 Resources 10 Lines 10 Bridging and Routing Information 11 Bridging 11 IP Routing 11 Configure the CyberSWITCH 12 Save Configuration Files 15 Verify the Installation 16 Remote Bridging Network with Security 17 Overview 17 Initial Installation Steps 17 Resources 19 Lines 19 Device Information 20 Bridging and
Resumo do conteúdo contido na página número 6
EXAMPLE NETWORKS Lines 47 Device Information 48 Bridging and Routing Information 50 Bridging 50 IP Routing 50 Configure the CyberSWITCH 51 Configuring the CyberSWITCH Options 51 Configuring the Security 54 Verify the Installation 57 IP Routing Network with PPP Devices 58 Overview 58 Initial Installation Steps 58 System Details 60 Resources 60 Lines 60 Bridging and Routing Information 61 Bridging 61 IP Routing 61 Bridging and
Resumo do conteúdo contido na página número 7
AppleTalk Routing Network 93 Overview 93 Initial Installation Steps 93 Resources 95 Lines 95 AppleTalk Routing 96 Configure the CyberSWITCH 98 Configuring the Options 98 Configuring Device Information 101 Configuring an AppleTalk Static Route 104 Save Configuration Files 105 Verify the Installation 105 Index 106 Workgroup Remote Access Switch 7
Resumo do conteúdo contido na página número 8
EXAMPLE NETWORKS We provide several example networks, beginning with a simple network and progressing to more complex networks. You may find the configuration instructions provided for each example helpful when configuring your own network. We include the following chapters: • Simple Remote Bridging Network An example of a simple network using remote bridge devices to access a CyberSWITCH’s four basic rate lines. • Remote Bridging Network with Security A bridged network with Calling Line Id
Resumo do conteúdo contido na página número 9
SIMPLE REMOTE BRIDGING NETWORK OVERVIEW This chapter provides an example of a simple network using remote bridge devices to access four basic rate lines in the CyberSWITCH. Bridges are formed between each of the LANs to which the remote bridge devices are connected, and the LAN to which the CyberSWITCH is connected. The following section provides the initial installation steps that would be used with any type of network installation. INITIAL INSTALLATION STEPS The initial steps in the Cybe
Resumo do conteúdo contido na página número 10
EXAMPLE NETWORKS SYSTEM DETAILS System Name: SITE1 PAP Password:_______________ CHAP Secret:___________________ RESOURCES Type Slot Switch type Synchronization type BRI 1 5ESS Ethernet_1 2 LINES BRI Lines Name Slot Port Line type Call screen TEI SPID Directory number Line1 1 1 PPP Auto Line2 1 2 PPP Auto Line3 1 3 PPP Auto Line4 1 4 PPP Auto PRI Lines Name Slot Port Framing type Line coding Sig. method Line build-out V.35 and RS232 Lines Name Slot Port Device/Network Idle c
Resumo do conteúdo contido na página número 11
SIMPLE REMOTE BRIDGING NETWORK Bridging and Routing Information BRIDGING AND ROUTING INFORMATION BRIDGING Bridging X enabled ❒ disabled Mode of Operation ❒ restricted ❒ unrestricted Bridge Filters Bridge Dial Out/ Known Connect List IP ROUTING IP Routing X enabled ❒ disabled Mode of Operation ❒ router X IP host Network Interface Information LAN Name IP address Mask Unnumbered WAN ❒ need ❒ don’t need Remote LAN Name IP address Mask Traditional WAN Name I
Resumo do conteúdo contido na página número 12
EXAMPLE NETWORKS CONFIGURE THE CYBERSWITCH Using CFGEDIT, we will guide you through the steps to configure the CyberSWITCH for a simple remote bridge network. We will execute these steps in the same order as they appear in the configuration menus. Start the CFGEDIT configuration utility. Type the following command at the system prompt: cfgedit The following Main Menu will then be displayed: Main Menu: 1) Physical Resources 2) Options 3) Security 4) Save Changes Select fun
Resumo do conteúdo contido na página número 13
SIMPLE REMOTE BRIDGING NETWORK Bridging and Routing Information LINE TYPE = BR_ISDN 1) POINT_TO_POINT 2) POINT_MULTIPOINT Select Option [default = POINT_TO_POINT] or press for previous menu: 1 The next item that you need to configure is the Data Link for the line.
Resumo do conteúdo contido na página número 14
EXAMPLE NETWORKS CSX1200 "A" ISDN POWER SERVICE TX LAN B-CHANNELS RX 10BASE - T B1 B3 B5 B7 B9 B11 B13 B15 B17 B19 E1 ONLY B21 B23 B25 B27 B29 B31 E1 T1 B2 B4 B6 B8 B10 B12 B14 B16 D B18 B20 B22 B24 D B26 B28 B30 L1 IP Host Interface 192.42.1.0 192.42.1.6 CSX1200 "B" LAN
Resumo do conteúdo contido na página número 15
SIMPLE REMOTE BRIDGING NETWORK Bridging and Routing Information To configure the IP host interface: 1. Select IP Interfaces from the IP configuration menu. 2. Select to add an interface. 3. Enter the IP address assigned to this interface. For SITE1, this is 192.42.1.6; for SITE2, this is 192.42.1.7. 4. Enter the subnet mask. 5. Enter the MTU size. 6. Select the transmit broadcast address. If IP RIP is enabled, enter the following additional information: 7. IP RIP receive control. 8. IP RIP resp
Resumo do conteúdo contido na página número 16
EXAMPLE NETWORKS VERIFY THE INSTALLATION Steps on how to verify the installation are detailed in the System Verification chapter of the User’s Guide. This section gives an outline of which steps should be executed. On the CyberSWITCH: Verify resources are operational Issue dr command Look for BRI line messages Look for LAN initialized messages Look for Bridge initialized messages Verify WAN Lines Available Connect WAN lines Issue dr command Look for “Data Link up 1,1” in reports On each Combi
Resumo do conteúdo contido na página número 17
REMOTE BRIDGING NETWORK WITH SECURITY OVERVIEW This example network is a bridged network with Calling Line Id security and Bridge MAC Address security enabled. The network is configured with two devices. One device will be configured to require a Bridge MAC Address security password, and one device will not. This network uses BRI lines. Worksheets for this network are included on the following pages. Note that a Hunt Group is used for the BRI lines pictured in the Network Topology Worksheet.
Resumo do conteúdo contido na página número 18
EXAMPLE NETWORKS NETWORK TOPOLOGY File Server PC Hunt Group Number: 13135551111 LAN B-CHANNELS E1 ONLY POWER B1 B3 B5 B7 B9 B11 B13 B15 B17 B19 B21 B23 B25 B27 B29 B31 SERVICE TX RX 10BASE - T E1 T1 D D B2 B4 B6 B8 B10 B12 B14 B16 B18 B20 B22 B24 B26 B28 B30 L1 BRI 13135551111 13135551113 13135551112 13135551114 ISDN BRI BRI 13135551212 13
Resumo do conteúdo contido na página número 19
REMOTE BRIDGING NETWORK WITH SECURITY Initial Installation Steps SYSTEM DETAILS System Name: Remote Bridge PAP Password:_______________ CHAP Secret:___________________ RESOURCES Type Slot Switch type Synchronization type BRI 1 NI-1 Ethernet_1 2 LINES BRI Lines Name Slot Port Line type Call TEI SPID Directory screen number Line1 1 1 PPP Auto 3135551111 13135551111* 3135551112 13135551112* Line2 1 2 PPP Auto 3135551113 13135551113* 3135551114 13135551114* * Hunt Group Number: 131
Resumo do conteúdo contido na página número 20
EXAMPLE NETWORKS DEVICE INFORMATION Device Name: Mike Mann Calling (ISDN, FR, etc.) Information X.25 Information Line Protocol HDLC bridge PVC Base Data Rate SVC Initial Data Rate Max Data Rate Dial-Out Number(s) Authentication Information: Frame Relay Information PAP Password DLCI CHAP Secret IP Host ID Bridge Ethernet Address* 000123456789 Bridge Password* JXF30 CLID(s) 13135551212 13135552121 * HDLC Bridge only Protocol for this particular device? Bridge
