Resumo do conteúdo contido na página número 1
Resumo do conteúdo contido na página número 2
Trademarks Copyright PLANET Technology Corp. 2003. Contents subject to revision without prior notice. PLANET is a registered trademark of PLANET Technology Corp. All other trademarks belong to their respective owners. Disclaimer PLANET Technology does not warrant that the hardware will work properly in all environments and applications, and makes no warranty and representa- tion, either implied or expressed, with respect to the quality, performance, merchantability, or fitness for a particu
Resumo do conteúdo contido na página número 3
Table of Contents About This Guide 1 Chapter 1 Introduction 3 Chapter 2 Unpacking and Setup 7 Chapter 3 Identifying External Components 9 Chapter 4 Connecting the Switch 11 Chapter 5 Technical Specifications 13 Appendix A RJ-45 PIN Specification 15 Appendix B Switch Operation 17 1
Resumo do conteúdo contido na página número 4
ABOUT THIS GUIDE Congratulations on your purchasing of FSD-503/FSD-803/FSD-1603 5/8/16-port 10/ 100Mbps Fast Ethernet Switch. This device integrates 100Mbps Fast Ethernet and 10Mbps Ethernet network capabilities in a highly flexible desktop package. Purpose This manual discusses how to install your FSD-503/FSD-803/FSD-1603. 5/8/16-port 10/100Mbps Fast Ethernet Switch. Terms/Usage In this manual, the term “Switch” (first letter upper case) refers to your 5/8/16-port 10/ 100Mbps Ethernet Switch
Resumo do conteúdo contido na página número 5
2 3
Resumo do conteúdo contido na página número 6
Chapter 1 INTRODUCTION This chapter describes the features of the Switch and some background information about Fast Ethernet switching technology. Fast Ethernet Technology The growing importance of LANs and the increasing complexity of desktop computing applications are fueling the need for high performance networks. A number of high-speed LAN technologies have been proposed to provide greater bandwidth and improve client/server response times. Among them, 100BASE-TX (Fast Ethernet) provi
Resumo do conteúdo contido na página número 7
required make routers relatively impractical. Today switches are an ideal solution to most kinds of local area network congestion problems. Features · The Switches were designed for easy installation and high Performance in an environment where traffic on the network and the number of user increase continuously. · The Switches with their small, compact size were specifically designed for small to middle workgroups. These Switches can be installed where space is limited; moreover, they prov
Resumo do conteúdo contido na página número 8
Other key Features are: · Auto MDI/MDI-X on each port for Uplink to another switch, hub or repeater. · Store and forward switching scheme capability. As the result of complete frame checking and error frame filtering, this scheme prevents error packages from transmitting among segments. · NWay Auto-negotiation for any port. This allows for auto-sensing of speed (10/ 100Mbps) thereby providing you with automatic and flexible solutions in your network connections. · Flow control for any port. T
Resumo do conteúdo contido na página número 9
6 7
Resumo do conteúdo contido na página número 10
Chapter 2 UNPACKING AND SETUP This chapter provides unpacking and setup information for the Switches. Unpacking Open the shipping cartons of the Switch and carefully unpacks its contents. The carton should contain the following items: · One 5/8/16-port 10/100Mbps Ethernet Switch · One external power adapter · This User’s manual If any item is found missing or damaged, please contact your local reseller for replacement. Setup The setup of the Switch can be performed using the following steps:
Resumo do conteúdo contido na página número 11
8 9
Resumo do conteúdo contido na página número 12
Chapter 3 IDENTIFYING EXTERNAL COMPONENTS This section identifies all the major external components of the hub. Both the front and rear panels are shown, followed by a description of each panel’s feature. The indicator panel is described in detail in the next chapter. Front Panel The figure below shows the front panels of the switches. Front Panel of FSD-503 Front Panel of FSD-803 Front Panel of FSD-1603 Please refer to the LED panel section for detailed information about each of the switch’
Resumo do conteúdo contido na página número 13
DC Power Power is supplied through an external AC power adapter. Jack: Check the technical specification section for information about the AC power input voltage. Since the switch does not include a power switch, plugging its power adapter into a power outlet will immediately power it on. Numbered Use these jacks to connect stations to the switch. These are MDI/MDI-X numbered MDI/MDI-X jacks, which mean, you can use ordi- Jacks: nary straight or crossover twisted-pair cables to connect use
Resumo do conteúdo contido na página número 14
Chapter 4 CONNECTING THE SWITCH This chapter describes how to connect the Switch to your Fast Ethernet network. PC to Switch A PC can be connected to the Switch via a two-pair Category 3, 4, 5 UTP/STP straight cable. The PC (equipped with a RJ-45 10/100Mbps phone jack) should be connected to any of the 5/8 numbered port. The LED indicators for PC connection depend on the LAN card capabilities. If LED indicators are not light after making a proper connection, check the PC LAN card, the cable
Resumo do conteúdo contido na página número 15
Switch to Switches (other devices) The Switch can be connected to another switch or other devices (routers, bridges, etc.) via a two-pair Category 3, 4, 5 UTP/STP straight or crossover cable. When using straight or crossover cable, this is done from the any (MDI/MDIX) port of the Switch (Switch A) to any of the 10Mbps or 100Mbps (MDI-X) port of the other switch (switch B) or other devices. The LNK/ACT, 100 LED indicators light green for hookup to 100Mbps speed or only LNK/ ACT light green fo
Resumo do conteúdo contido na página número 16
Chapter 5 TECHNICAL SPECIFICATIONS Standards IEEE802.3 10Base-T Ethernet IEEE802.3u 100 Base-TX Fast Ethernet Protocol CSMA/CD Data Transfer Rate Ethernet: 10Mbps (half duplex), 20Mbps (full duplex)Fast Ethernet: 100Mbps (half duplex), 200Mbps (full duplex) Topology Star Network Cables 10BASET: 2-pair UTP Cat. 3,4,5 (100 m), EIA/TIA- 568 100-ohm STP (100 m) 100BASE-TX: 2-pair UTP Cat. 5 (100 m), EIA/TIA- 568 100-ohm STP (100 m) Number of Ports 5/8/16 x 10/100Mbps ports DC inputs FSD-503
Resumo do conteúdo contido na página número 17
Performance Transmit Method: Store-and-forward RAM Buffer: FSD-503/803: 1-Mbit packet buffer FSD-1603: 4-Mbit packet buffer Filtering Address Table: FSD-503/803: Up to 2K entries per device FSD-1603: Up to 8K entries per device Packet Filtering/ 10Mbps Ethernet: 14,880/pps Forwarding Rate: 100Mbps Fast Ethernet: 148,800/pps MAC Address Learning: Automatic update 14 15
Resumo do conteúdo contido na página número 18
APPENDIX A RJ-45 PIN SPECIFICATION When connecting your FSD-series 10/100Mbps Ethernet Switch to another switch, a bridge or a hub, a straight or crossover cable is necessary. Each port of the Switch supports auto-MDI/MDI-X detection. That means you can directly connect the Switch to any Ethernet devices without making a crossover cable. The following table and diagram show the standard RJ-45 receptacle/ connector and their pin assignments: RJ-45 Connector pin assignment Contact MDI Media
Resumo do conteúdo contido na página número 19
There are 8 wires on a standard UTP/STP cable and each wire is color-coded. The following shows the pin allocation and color of straight cable and crossover cable connection: Figure A-1: Straight-Through and Crossover Cable Please make sure your connected cable are with same pin assignment and color as above picture before deploying the cables into your network. 16 17
Resumo do conteúdo contido na página número 20
APPENDIX B SWITCH OPERATION Address Table The Switch is implemented with an address table. This address table composed of many entries. Each entry is used to store the address information of some node in network, including MAC address, port no, etc. The information comes from the learning process of Ethernet Switch. Learning When one packet comes in from any port, the Ethernet Switch will record the source address, port no. and the other related information in address table. These informa
