Resumo do conteúdo contido na página número 1
MLM 104 Faceplates Installation Guide
MLM 104 Faceplates
™
This guide provides instructions for installing the following Extron MediaLink
Mounting Options faceplates, which are designed for use with MLC 104 IP Plus
MediaLink Controllers.
The MLM 104 L, MLM 104 2GWP, or MLM 104 4GWP faceplate is shipped
with the MLC 104 IP Plus controller, depending on the controller configuration
that is ordered. The rest of the mounting options described below may be
ordered separately as replacements, or for
Resumo do conteúdo contido na página número 2
MLM 104 Faceplates Installation Guide, cont’d � MLM 104 2GWP — A two-gang (4.50" H x 4.60" W [11.43 cm H x 11.68 cm W]) faceplate that can be mounted to a mud ring (mounting bracket), an Extron Surface Mount Box, an Extron External Wall Box, or a standard electrical box Part numbers: 70-378-02 (black), 70-378-03 (white), 70-378-05 (RAL9010 white) � MLM 104 4GWP — A four-gang (4.50" H x 8.23" W [11.43 cm H x 20.9 cm W]) faceplate with an opening that accommodates four single-space AAPs.
Resumo do conteúdo contido na página número 3
Replacing the MLC 104 IP Plus Faceplate with an MLM Faceplate 1. If your MLC controller is already installed in a wall or furniture, remove the four screws that attach it to its mounting surface (marked in the diagram a below), and lift it out. 2. After the MLC has been removed from the wall or furniture, use a small Phillips screwdriver to remove the four faceplate attachment screws (marked in the diagram below), and save them for later use. b Do not remove the four faceplate screws while th
Resumo do conteúdo contido na página número 4
MLM 104 Faceplates Installation Guide, cont’d 4. Align the openings in the new MLM faceplate with the controller’s buttons, knob, and LEDs, then place the new faceplate on the MLC 104 IP Plus. 5. Replace the four screws removed in step 2, and hand tighten them. 6. Install the MLC 104 IP Plus controller in a wall or furniture as appropriate. Templates Use one of the following templates as a guide to measure and mark the hole for installing the MLM 104 faceplate with an attached MLC 104 IP Plus.
Resumo do conteúdo contido na página número 5
3.5" (8.9 cm) MLM 104 L and MLC 104 IP Plus L template 3.15" (8.0 cm) Top Panel 2.8" (7.1 cm) SURFACE CUT-OUT AREA FOR FURNITURE MOUNT 6.5" Location of (16.5 cm) MLC 104 IP Plus To install MLC 104 IP Plus and MLM 104 L directly into furniture, cut along this line. .250" (0.64 cm) .295" (0.75 cm) TEMPLATE IS NOT FULL SIZE. Cut-Out Template for Extron's MLM 104 L and MLC 104 IP Plus L MLM 104 Faceplates � Installation Guide 5
Resumo do conteúdo contido na página número 6
7.9" (20.1 cm) MLM 104 Faceplates Installation Guide, cont’d MLM 104 LAAP template 3.15" (8.0 cm) 2.8" (7.1 cm) Top Panel 10" (25.4 cm) Location of MLC 104 IP Plus SURFACE CUT-OUT AREA FOR FURNITURE MOUNT To install the MLC 104 IP Plus and the MLM 104 LAAP directly into furniture, cut along this line. .250" (0.64 cm) .295" (0.75 cm) TEMPLATE IS NOT FULL SIZE. Cut-Out Template for Extron's MLM 104 LAAP 6 MLM 104 Faceplates � Installation Guide
Resumo do conteúdo contido na página número 7
3.5" (8.9 cm) MLM 104 2GWP and MLC 104 IP Plus template 4.5" (11.4 cm) Top Panel 2.8" (7.1 cm) SURFACE CUT-OUT AREA FOR FURNITURE MOUNT 4.6" Location of MLC 104 IP Plus (11.7 cm) To install MLC 104 IP Plus and MLM 104 2GWP directly into furniture, cut along this line. TEMPLATE IS NOT FULL SIZE. Cut-Out Template for Extron's MLM 104 2GWP and MLC 104 IP Plus MLM 104 Faceplates � Installation Guide 7
Resumo do conteúdo contido na página número 8
7.1" (18.0 cm) MLM 104 Faceplates Installation Guide, cont’d MLM 104 4GWP and MLC 104 IP Plus AAP template 4.5" (11.4 cm) 2.8" (7.1 cm) Top Panel 8.23" (20.9 cm) Location of MLC 104 IP Plus SURFACE CUT-OUT AREA FOR FURNITURE MOUNT To install the MLC 104 IP Plus and the MLM 104 4GWP directly into furniture, cut along this line. TEMPLATE IS NOT FULL SIZE. Cut-Out Template for Extron's MLM 104 4GWP and MLC 104 IP Plus AAP 8 MLM 104 Faceplates � Installation Guide
Resumo do conteúdo contido na página número 9
11.0" (27.9 cm) MLM 104 6GWP template 4.5" (11.4 cm) 2.8" (7.1 cm) Top Panel Location of MLC 104 IP Plus 11.752" (29.85 cm) SURFACE CUT-OUT AREA FOR FURNITURE MOUNT To install the MLC 104 IP Plus and the MLM 104 6GWP directly into furniture, cut along this line. TEMPLATE IS NOT FULL SIZE. Cut-Out Template for Extron's MLM 104 6GWP MLM 104 Faceplates � Installation Guide 9
Resumo do conteúdo contido na página número 10
Extron Electronics, Asia Extron Electronics, USA Extron Electronics, Europe Extron Electronics, Japan 135 Joo Seng Rd. #04-01 1230 South Lewis Street Beeldschermweg 6C Kyodo Building, 16 Ichibancho PM Industrial Bldg., Singapore 368363 Anaheim, CA 92805 3821 AH Amersfoort, The Netherlands Chiyoda-ku, Tokyo 102-0082 +800.7339.8766 +65.6383.4400 800.633.9876 714.491.1500 +800.3987.6673 +31.33.453.4040 Japan FAX +65.6383.4664 FAX 714.491.1517 FAX +31.33.453.4050 +81.3.3511.7655 FAX +81.
