Resumo do conteúdo contido na página número 1
D-Link™ DES-1250G
Web Smart 48-Port 10/100Mbps+2-Port Combo 10/100/1000Mbps
Copper/SFP(Mini GBIC) Gigabit Switch
Manual
Second Edition
Building Networks for People
RECYCLABLE
Resumo do conteúdo contido na página número 2
Information in this document is subject to change without notice. © 2004 D-Link Computer Corporation. All rights reserved. Reproduction in any manner whatsoever without the written permission of D-Link Computer Corporation is strictly forbidden. Trademarks used in this text: D-Link and the D-LINK logo are trademarks of D-Link Computer Corporation; Microsoft and Windows are registered trademarks of Microsoft Corporation. Other trademarks and trade names may be used in this document to ref
Resumo do conteúdo contido na página número 3
CE Mark Warning This is a Class A product. In a domestic environment, this product may cause radio interference in which case the user may be required to take adequate measures. Warnung! Dies ist ein Produkt der Klasse A. Im Wohnbereich kann dieses Produkt Funkstoerungen verursachen. In diesem Fall kann vom Benutzer verlangt werden, angemessene Massnahmen zu ergreifen. Precaución! Este es un producto de Clase A. En un entorno doméstico, puede causar interferencias de radio, en cuyo case,
Resumo do conteúdo contido na página número 4
About This Guide...................................................................................................................................................................................... 5 Purpose ................................................................................................................................................................................................. 5 Terms/Usage .................................................................................
Resumo do conteúdo contido na página número 5
ABOUT THIS GUIDE Congratulations on your purchase of the Web Smart 48+2G-Port 10/100/1000Mbps/SFP Switch. This device integrates 1000Mbps Gigabit Ethernet, 100Mbps Fast Ethernet, and 10Mbps Ethernet network capabilities in a highly flexible package. Purpose This guide discusses how to install your Web Smart 48+2G-Port 10/100/1000Mbps/SFP Switch. Terms/Usage In this guide, the term “Switch” (first letter upper case) refers to your Web Smart 48+2G-Port 10/100/1000Mbps Switch, and “switch”
Resumo do conteúdo contido na página número 6
INTRODUCTION This chapter describes the features of the Web-Smart 48+2G-Port 10/100/1000Mbps/SFP Switch and some background information about Ethernet/Fast Ethernet/Gigabit Ethernet switching technology. Gigabit Ethernet Technology Gigabit Ethernet is an extension of IEEE 802.3 Ethernet utilizing the same packet structure, format, and support for CSMA/CD protocol, full-duplex, flow control, and management objects, but with a tenfold increase in theoretical throughput over 100-Mbps Fast Ethe
Resumo do conteúdo contido na página número 7
VLAN (Virtual Local Area Network) A VLAN is a group of end-stations that are not constrained by their physical location and can communicate as if a common broadcast domain, a LAN. The primary utility of using VLAN is to reduce latency and the need for routers, by using faster switching instead. Other VLAN utility includes: Security, Security is increased with the reduction of opportunity in eavesdropping on a broadcast network because data will be switched to only those confidential users w
Resumo do conteúdo contido na página número 8
Features 48×10/100Mbps Auto-negotiation Fast Ethernet RJ-45 ports 2×10/100/1000Mbps Auto-negotiation Gigabit RJ-45 ports 2×mini-GBIC/SFP ports, share with the 2 gigabit copper ports All RJ-45 ports support auto MDI/MDIX, so there is no need to use cross-over cables or an up-link port Half-duplex transfer mode for 10/100Mbps RJ45 ports Full-duplex transfer mode for 10/100/1000Mbps RJ45 ports Store-and-Forward switching scheme capability to support rate adaptation and ensure data i
Resumo do conteúdo contido na página número 9
UNPACKING AND INSTALLATION This chapter provides unpacking and installation information for the Switch. Unpacking Open the shipping cartons of the Switch and carefully unpacks its contents. The carton should contain the following items: One Web Smart 48+2G-Port 10/100/1000Mbps/SFP Switch One AC power cord, suitable for your area’s electrical power connections Four rubber feet to be used for shock cushioning Screws and two mounting brackets CD-Rom with Web Management Utility and User
Resumo do conteúdo contido na página número 10
AC Power The Switch uses a 100-240V AC, 50-60 Hz AC power supply. The power switch is located at the rear of the unit adjacent to the AC power connector and the system fan. The Switch’s power supply will adjust to the local power source automatically and may be turned on without having any or all LAN segment cables connected.
Resumo do conteúdo contido na página número 11
IDENTIFYING EXTERNAL COMPONENTS This chapter describes the front panel, rear panel, and LED indicators of the Switch. Front Panel The figure below shows the front panels of the Switch. Figure 3. Front panel of 48+2G-port Gigabit Ethernet Switch LED Indicator: Comprehensive LED indicators display the status of the Switch and the network (see the LED Indicators chapter below). Fast Ethernet Ports (Port 1~48): These p
Resumo do conteúdo contido na página número 12
UNDERSTANDING LED INDICATORS The front panel LEDs provide instant status feedback, and help monitor and troubleshoot when needed. Figure 5. LED indicators of the Switch Power and System LEDs POWER: Power Indicator On : When the Power LED lights on, the Switch is receiving power. Off : When the Power turns off or the power cord has improper connection. CPU: Management Indicator Blinking : When the CPU is working, the System LED is blinking. On/Off : The CPU is not working. Por
Resumo do conteúdo contido na página número 13
On When the Amber light is on, the respective port is connected to a (Amber) 100Mbps Fast Ethernet network. Off : When the respective port is connected to a 10Mbps Ethernet or No link. Ports 49~ 50 mini-GBIC Status LEDs Link/ACT: Link/Activity On : When the mini-GBIC transceiver is installed and connected to a network, the Link/ACT LED lights on. Blinking : When the LED is blinking, the mini-GBIC module is receiving data on a network. Off : No link.
Resumo do conteúdo contido na página número 14
CONFIGURATION Through the Web Browser you can configure Switch settings such as VLAN, Trunking, QoS… etc. With the attached Web Management Utility, you can easily discover all Web Management Switches, assign the IP Address, change the password, and upgrade new firmware. Installing the Web Management Utility "If your utility is old version, please remove it and install v.1.01 or higher" The following provides instructions guiding you through the installation of the Web Management utility.
Resumo do conteúdo contido na página número 15
Trap IP: Shows the IP where the Trap is to be sent. Subnet Mask: Shows the Subnet Mask set of the device. Gateway: Shows the Gateway set of the device. Monitor List All the Web Smart Devices in the Monitor List can be monitored; you can also receive traps and show the status of the device. System word definitions in the Monitor List: S: Shows the system symbol of the Web-Smart device, represents a device system that is not alive. IP Address: Shows the current IP address of the d
Resumo do conteúdo contido na página número 16
The factory default password is "admin." Figure 9. Configuration Setting Password Change: You can use this Password Change when you need to change the password, fill in the required passwords in the dialog box and press the “Set” button to process the password change immediately. Figure 10. Password Change Firmware Upgrade: When the device has a new function, there will be a new firmware to update the device; use this function to upgrade the firmware. Figure 11. Web Access: Double c
Resumo do conteúdo contido na página número 17
In the “Option TAB”, there is the Refresh Time function; this function helps you to refresh the time for monitoring the device. Choose 15 secs, 30 secs, 1 min, 2 min, and 5 min to select the time for monitoring. In the “Help TAB”, there is About function, it will show out the version of the Web Management Utility. Configuring the Switch The 48+2G-Port 10/100/1000Mbps Gigabit Ethernet Web Smart Switch has a Web GUI interface for smart switch configuration. The Switch can be configured throug
Resumo do conteúdo contido na página número 18
Figure 14. Device Status Setup Menu When the main page appears, find the Setup menu on the left side of the screen (Figure 15). Click on the setup item that you want to configure. There are eleven options: Port Settings, VLAN Settings, Trunk Setting, Device Status, Statistic, System Settings, Trap Setting, Password Setting, Backup Setting, and Reset Setting as shown in the Main Menu screen. Figure 15. Setup menu Configuring Setup Setting There are four items, including Port Settings,
Resumo do conteúdo contido na página número 19
Figure 16. Port Configuration To change the port setting, click on the ID parameter to enter the selected port to configure its Speed/Disable, Flow control, and QoS setting. Figure 17. Speed: This setting has six modes—1000M Full, 100M Full, 100M Half, 10M Full, 10M Half, Auto, and Disable—for speed or port disable selections. Note: If the speed set to 100M full mode or 10M full mode, flow control should have the fixed setting set to disable. Flow Control: This setting determines whet
Resumo do conteúdo contido na página número 20
VID group and press the “Remove the VID” button. To modify the VID group setting, select the VID group and change the setting, and press the “Apply” button to save the settings. Figure 18. When you select Port VLAN setting, fill in each port’s PVID value between 1 and 4094. Figure 19. Trunk Setting The Trunk function enables the Switch to cascade two devices with a double times bandwidth (up to 4000Mbps in full-duplex mode). There are seven groups for trunk setting, each group has a f
