Resumo do conteúdo contido na página número 1
Cisco EnergyWise Configuration Guide
EnergyWise Phase 2
August 2010
Americas Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
http://www.cisco.com
Tel: 408 526-4000
800 553-NETS (6387)
Fax: 408 527-0883
Text Part Number: OL-19806-03
Resumo do conteúdo contido na página número 2
THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS MANUAL ARE SUBJECT TO CHANGE WITHOUT NOTICE. ALL STATEMENTS, INFORMATION, AND RECOMMENDATIONS IN THIS MANUAL ARE BELIEVED TO BE ACCURATE BUT ARE PRESENTED WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED. USERS MUST TAKE FULL RESPONSIBILITY FOR THEIR APPLICATION OF ANY PRODUCTS. THE SOFTWARE LICENSE AND LIMITED WARRANTY FOR THE ACCOMPANYING PRODUCT ARE SET FORTH IN THE INFORMATION PACKET THAT SHIPPED WITH THE PRODUCT AND ARE
Resumo do conteúdo contido na página número 3
CONTENTS Preface v Audience v Purpose v Conventions v Related Publications vii Obtaining Documentation and Support on the Cisco Developer Network viii Obtaining Documentation, Support, and Security Guidelines viii CHAPTER 1 Managing Single Entities 1-1 Overview 1-2 Creating an EnergyWise Domain 1-4 Power Levels 1-5 Attributes 1-6 Recurring Event 1-6 Secure Domain Communication 1-6 MIBs 1-7 Switch Connected to an IP Phone 1-8 Switc
Resumo do conteúdo contido na página número 4
Contents Manually Managing Power 1-26 Automatically Managing Power 1-27 CHAPTER 2 Managing Multiple Entities 2-1 Running Queries 2-1 Multiple Switches Connected to Multiple End Points 2-3 Using Queries to Manage Power in the Domain 2-4 Examples 2-5 Querying with the Name Attribute 2-6 Querying with Keywords 2-6 Querying to Set Power Levels 2-6 Setting the Time-Out Value 2-7 CHAPTER 3 EnergyWise CLI Commands 3-1 clear energywise neighbors 3-2
Resumo do conteúdo contido na página número 5
Preface Audience This guide is for the networking professional managing the Cisco network devices. The term switch refers to Catalyst switches and other Cisco network devices, such as routers and access points. Purpose This document describes how to configure Cisco EnergyWise in your network. This guide does not describe how to install your network device. For information, see the hardware installation guide for your device. For information about the Cisco IOS Release 12.2 commands, see the
Resumo do conteúdo contido na página número 6
Preface � Square brackets ([ ]) mean optional elements. � Braces ({ }) group required choices, and vertical bars ( | ) separate the alternative elements. � Braces and vertical bars within square brackets ([{ | }]) mean a required choice within an optional element. For interactive examples � Terminal sessions and system displays are in screen font. � Information that you enter is in boldface screen font. � Nonprinting characters, such as passwords or tabs, are in angle brackets (< >). No
Resumo do conteúdo contido na página número 7
Preface Related Publications For information about the Cisco network devices, see � Cisco IOS Release Notes for Cisco EnergyWise, EnergyWise Phase 2 on Cisco.com � Configuring Cisco EnergyWise Feature for Branch Routers: http://www.cisco.com/en/US/docs/routers/access/1900/software/configuration/guide/enrgyz_artg.h tml � Documentation for the software release running on your device on Cisco.com: http://www.cisco.com/cisco/web/support/index.html. Note Before installing, configuring, or upgr
Resumo do conteúdo contido na página número 8
Preface Obtaining Documentation and Support on the Cisco Developer Network Cisco EnergyWise development partners can access the EnergyWise documents, API and SDK software code, and Cisco IOS software by joining the Cisco Developer Network: http://developer.cisco.com/web/esdk/home. You need a support contract and license to access EnergyWise resources on the Cisco Developer Network and on TAC. The business development manager who registered your licence must set up your Cisco.com account w
Resumo do conteúdo contido na página número 9
CH A P T E R 1 Managing Single Entities � Overview, page 1-2 � Creating an EnergyWise Domain, page 1-4 � Power Levels, page 1-5 � Attributes, page 1-6 � Recurring Event, page 1-6 � MIBs, page 1-7 � Switch Connected to an IP Phone, page 1-8 � Switch Connected to a PC, page 1-9 � Configuration Guidelines, page 1-10 � Using the Call In-Progress Feature, page 1-12 � PoE and EnergyWise Interactions, page 1-13 � Preventing Network Access to a Non-Cisco End Point, page 1-14 � CLI Compati
Resumo do conteúdo contido na página número 10
Chapter 1 Managing Single Entities Overview Warning Voice over IP (VoIP) service and the emergency calling service do not function if power fails or is disrupted. After power is restored, you might have to reset or reconfigure equipment to regain access to VoIP and the emergency calling service. In the USA, this emergency number is 911. You need to be aware of the emergency number in your country. For information about this warning, see the “Important Notice” appendix. Overview In a Ci
Resumo do conteúdo contido na página número 11
Chapter 1 Managing Single Entities Overview Figure 1-1 EnergyWise Network 4 4 1 9 7 7 5 2 10 8 8 2 7 7 3 IP 11 6 6 6 6 1 Network management stations 7 TCP 2 Domain members 8 UDP 3 End points 9 Runs queries and sets EnergyWise attributes 4 Management station 10 Runs, forwards, and responds to queries 5 Domain member 11 Responds to queries 6 End point � Management stations—Control applications and devices that use EnergyWise to monitor and manage the power usage of domain members and end
Resumo do conteúdo contido na página número 12
Chapter 1 Managing Single Entities Creating an EnergyWise Domain Power over Ethernet (PoE) domain members and end points can also receive power from PoE switches or Cisco EtherSwitch service modules. For example, IP phones and access points connected to a PoE switch receive power from the switch. Creating an EnergyWise Domain An EnergyWise domain is treated as one unit of power management and is similar to a network-management community (for example, a VLAN Trunking Protocol [VTP] dom
Resumo do conteúdo contido na página número 13
Chapter 1 Managing Single Entities Power Levels Power Levels The devices in an EnergyWise network are from different manufacturers. To manage power usage consistently, EnergyWise uses a set of power levels. If a domain member sends an end point a request to change the power level, the end point determines the appropriate action. Table 1-1 Power Levels Category Level Description Operational 10 Full 9 High 8 Reduced Standby 7 Medium 6 Frugal 5 Low 4 Ready 3 Standby Nonoperational 2 Slee
Resumo do conteúdo contido na página número 14
Chapter 1 Managing Single Entities Attributes Attributes Table 1-2 Keywords, Name, and Role Definition Defaults Keywords Device description (other than None. the name or role) for which query results are filtered Name Device identity for which query For a PoE port, the short version of the port name. For results are filtered example, Gi0.2 for Gigabit Ethernet 0/2. For a switch, the hostname. For an end point, see the documentation for the end point and the agent or client running on i
Resumo do conteúdo contido na página número 15
Chapter 1 Managing Single Entities MIBs MIBs EnergyWise switches support the CISCO-ENERGYWISE-MIB. For information, see the Release Notes for Cisco EnergyWise, EnergyWise Phase 2 on Cisco.com and go to http://www.cisco.com/public/sw-center/netmgmt/cmtk/mibs.shtml and click SNMP v2 MIBs or SNMP v3 MIBs. You can also use FTP to access the MIB files. Step 1 Make sure that your FTP client is in passive mode. Note Some FTP clients do not support passive mode. Step 2 Use FTP to access the
Resumo do conteúdo contido na página número 16
Chapter 1 Managing Single Entities Switch Connected to an IP Phone Switch Connected to an IP Phone Figure 1-2 Switch and IP Phone Scenario WAN 1 2 IP 3 1 Management station 3 End point 2 Domain member The switch sends the end point a recurring event to power on at 0700 and to power off at 1900. Cisco EnergyWise Configuration Guide 1-8 OL-19806-03 276242
Resumo do conteúdo contido na página número 17
Chapter 1 Managing Single Entities Switch Connected to a PC Switch Connected to a PC Figure 1-3 Switch and PC Scenario 1 2 3 1 Management station 3 End point 2 Domain member The switch sends the end point a recurring event to power on at 0600 and to power off at 2200. Cisco EnergyWise Configuration Guide OL-19806-03 1-9 276243
Resumo do conteúdo contido na página número 18
Chapter 1 Managing Single Entities Configuration Guidelines Configuration Guidelines By default, EnergyWise is disabled on the switch. If you enter the no energywise level command, the switch does not immediately change the power level to the default. The power level changes when the switch restarts or when you enter the energywise level level command. For a switch with PoE ports, such as a PoE-capable switch: � When you add the switch to a domain, EnergyWise is enabled on the switch
Resumo do conteúdo contido na página número 19
Chapter 1 Managing Single Entities Configuration Guidelines If you use a wildcard for the day_of_month and specify the day_of_week, the event occurs on the day_of_week. If you use wildcards for both the day_of_month and the day_of_week, the event occurs on any day. – After you upgrade the software to an EnergyWise Phase 2 release or later, a configured recurring event might occur less frequently than before the upgrade. Reconfigure the event. � If you use the energywise level level
Resumo do conteúdo contido na página número 20
Chapter 1 Managing Single Entities Using the Call In-Progress Feature Using the Call In-Progress Feature Use this feature, also referred to as activity check, to configure the switch to wait until a Cisco IP phone connected to a PoE port is not sending or receiving traffic before powering off the port. Use the energywise activitycheck interface configuration command on these Cisco devices: � Catalyst 6500 switches (see the Cisco IOS Release Notes for Cisco EnergyWise, EnergyWise Phase
