Resumo do conteúdo contido na página número 1
ES4626/ES4650
Layer 3 Gigabit Switch
Management Guide
1
www.edge-core.com
Resumo do conteúdo contido na página número 2
Preface ES4626/ES4650 is a routing switch that can be deployed as the core layer device for campus and enterprise networks, or as an aggregation device for IP metropolitan area networks (MAN). The ES4626 provides 24 fixed 1000MB port (4 of which are fixed 1000MB Combo fiber cable port/copper cable ports) and 2 10GB XFP ports. The ES4650 provides 48 fixed 1000MB port (4 of which are fixed 1000MB Combo fiber cable port/copper cable ports) and 2 10GB XFP ports. ES4626/ES4650 can seamles
Resumo do conteúdo contido na página número 3
Contents Preface 2 Contents 3 Chapter 1 Switch Management _________________________________________ 12 1.1 Management Options ____________________________________________ 12 1.1.1 Out-of-band Management ____________________________________________ 12 1.1.2 In-band Management________________________________________________ 15 1.2 Management Interface____________________________________________ 21 1.2.1 CLI Interface ______________________________________________________ 21 1.2.2 WEB
Resumo do conteúdo contido na página número 4
2.2.4 traceroute _________________________________________________________ 46 2.2.5 show ______________________________________________________________ 47 2.2.6 debug _____________________________________________________________ 53 2.3 Configuring Switch IP Addresses _________________________________ 53 2.3.1 Configuring Switch IP Addresses Task Sequence _________________________ 53 2.3.2 Commands for Configuring Switch IP Addresses _________________________ 54 2.4 SNMP _________________
Resumo do conteúdo contido na página número 5
3.4.1 Monitor and Debug Commands _______________________________________115 3.4.2 Port Troubleshooting Help____________________________________________116 3.5 WEB Management ______________________________________________ 116 3.5.1 Ethenet port configuration ___________________________________________116 3.5.2 Vlan interface configuration __________________________________________118 3.5.3 Port mirroring configuration_________________________________________ 120 3.5.4 Port debug and maint
Resumo do conteúdo contido na página número 6
5.4 VLAN Troubleshooting Help _____________________________________ 160 5.4.1 Monitor and Debug Information______________________________________ 160 5.4.2 VLAN Troubleshooting Help_________________________________________ 162 5.5 WEB Management ______________________________________________ 162 5.5.1 Vlan configuration _________________________________________________ 162 5.5.2 GVRP configuration________________________________________________ 168 5.5.3 VLAN debug and maintenance ______
Resumo do conteúdo contido na página número 7
8.2 802.1X Configuration____________________________________________ 211 8.2.1 802.1X Configuration Task Sequence ___________________________________211 8.2.2 802.1X Configuration Command _____________________________________ 216 8.3 802.1X Apply Example___________________________________________ 226 8.4 802.1X Trouble Shooting ________________________________________ 227 8.4.1 802.1X Debug and Monitor Command_________________________________ 227 8.4.2 802.1X Troubleshooting ____________
Resumo do conteúdo contido na página número 8
10.3 Port Channel Example_________________________________________ 262 10.4 Port Channel Troubleshooting Help ____________________________ 264 10.4.1 Monitor and Debug Commands ______________________________________ 264 10.4.2 Port Channel Troubleshooting Help ___________________________________ 269 10.5 Web Management _____________________________________________ 270 10.5.1 LACP port group configuration ______________________________________ 270 10.5.2 LACP port configuration __________
Resumo do conteúdo contido na página número 9
12.4.3 Time difference_______________________________________________________ 308 12.4.4 Show sntp ___________________________________________________________ 308 Chapter 13 QoS Configuration _________________________________________ 309 13.1 QoS__________________________________________________________ 309 13.1.1 Introduction to QoS ________________________________________________ 309 13.1.2 QoS Configuration __________________________________________________311 13.1.3 QoS Example______
Resumo do conteúdo contido na página número 10
15.3.2 RIP Configuration _________________________________________________ 369 15.3.3 Typical RIP Scenario _______________________________________________ 385 15.3.4 RIP Troubleshooting Help ___________________________________________ 387 15.4 OSPF ________________________________________________________ 389 15.4.1 Introduction to OSPF_______________________________________________ 389 15.4.2 OSPF Configuration________________________________________________ 392 15.4.3 Typical OSPF Scena
Resumo do conteúdo contido na página número 11
16.6 IGMP_________________________________________________________ 485 16.6.1 Introduction to IGMP ______________________________________________ 485 16.6.2 IGMP configuration ________________________________________________ 486 16.6.3 Typical IGMP Scenario _____________________________________________ 492 16.6.4 IGMP Troubleshooting Help _________________________________________ 492 16.7 web Management _____________________________________________ 495 16.7.1 Multicast common configurati
Resumo do conteúdo contido na página número 12
Chapter 1 Switch Management 1.1 Management Options After purchasing the switch, the user needs to configure the switch for network management. ES4626/ES4650 provides two management options: in-band management and out-of-band management. 1.1.1 Out-of-band Management Out-of-band management is the management through Console interface. Generally, the user will use out-of-band management for the initial switch configuration, or when in-band management is not available. For instance, the
Resumo do conteúdo contido na página número 13
Serial port cable One end attach to the RS-232 serial port, the other end to the Console port. ES4626/ES4650 Functional Console port required. Step 2 Entering the HyperTerminal Open the HyperTerminal included in Windows after the connection established. The example below is based on the HyperTerminal included in Windows XP. 1) Click Start menu - All Programs – Accessories – Communication - HyperTerminal. Fig 1-2 Opening HyperTerminal (1) 2) Type a name for opening HyperTerminal, s
Resumo do conteúdo contido na página número 14
Fig 1-4 Opening HyperTerminal (3) 4) COM1 property appears, select “9600” for “Baud rate”, “8” for “Data bits”, “none” for “Parity checksum”, “1” for stop bit and “none” for traffic control; or, you can also click “Revert to default” and click “OK”. Fig 1-5 Opening HyperTerminal (4) Step 3 Entering switch CLI interface: 14
Resumo do conteúdo contido na página número 15
Power on the switch. The following appears in the HyperTerminal windows, that is the CLI configuration mode for ES4626. ES4626 Management Switch Copyright (c) 2001-2004 by Accton Technology Corporation. All rights reserved.
Resumo do conteúdo contido na página número 16
the switch. In the case when in-band management fails due to switch configuration changes, out-of-band management can be used for configuring and managing the switch. 1.1.2.1 Management via Telnet To manage the switch with Telnet, the following conditions should be met: 1) Switch has an IP address configured 2) The host IP address (Telnet client) and the switch’s VLAN interface IP address is in the same network segment. 3) If not 2), Telnet client can connect to an IP address of the
Resumo do conteúdo contido na página número 17
management (i.e. Console mode), The configuration commands are as follows (All switch configuration prompts are assumed to be “switch” hereafter if not otherwise specified): Switch> Switch>en Switch#config Switch(Config)#interface vlan 1 Switch(Config-If-Vlan1)#ip address 10.1.128.251 255.255.255.0 Switch(Config-If-Vlan1)#no shutdown Step 2: Run Telnet Client program. Run Telnet client program included in Windows with the specified Telnet target. Fig 1-7 Run telnet client p
Resumo do conteúdo contido na página número 18
will be able to enter the switch’s CLI configuration interface. The commands used in the Telnet CLI interface after login is the same as in that in the Console interface. Fig 1-8 Telnet Configuration Interface 1.1.2.2 Management via HTTP To manage the switch via HTTP, the following conditions should be met: 1) Switch has an IP address configured 2) The host IP address (HTTP client) and the switch’s VLAN interface IP address are in the same network segment; 3) If 2) is not met, HTTP
Resumo do conteúdo contido na página número 19
Switch(Config)#ip http server Step 2: Run HTTP protocol on the host. Open the Web browser on the host and type the IP address of the switch. Or run directly the HTTP protocol on the Windows. For example, the IP address of the switch is “10.1.128.251”. Fig 1-9 Run HTTP Protocol Step 3: Logon to the switch To logon to the HTTP configuration interface, valid login user name and password are required; otherwise the switch will reject HTTP access. This is a method to protect the
Resumo do conteúdo contido na página número 20
Fig 1-10 Web Login Interface Input the right username and password, and then the main Web configuration interface is shown as below. 20
