Resumo do conteúdo contido na página número 1
HTR-5960
HTR-5960_U_cv.fm Page 1 Friday, December 2, 2005 1:57 PM
U
HTR-5960
AV Receiver
© 2006 All rights reserved.
YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.
YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA
YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, GERMANY
YAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77
Resumo do conteúdo contido na página número 2
IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS 10 Ventilation – Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the CAUTION product and to protect it from overheating, and these RISK OF ELECTRIC SHOCK openings must not be blocked or covered. The openings DO NOT OPEN should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should not be placed in a built-in installation such as
Resumo do conteúdo contido na página número 3
IMPORTANT SAFETY INSTRUCTIONS d) If the product does not operate normally by following 24 Outdoor Antenna Grounding – If an outside antenna or the operating instructions. Adjust only those controls cable system is connected to the product, be sure the antenna that are covered by the operating instructions as an or cable system is grounded so as to provide some improper adjustment of other controls may result in protection against voltage surges and built-up static charges. damage and will of
Resumo do conteúdo contido na página número 4
CAUTION: READ THIS BEFORE OPERATING YOUR UNIT. CAUTION: READ THIS BEFORE OPERATING YOUR UNIT. 1 To assure the finest performance, please read this manual 14 Do not attempt to modify or fix this unit. Contact qualified carefully. Keep it in a safe place for future reference. YAMAHA service personnel when any service is needed. The cabinet should never be opened for any reasons. 2 Install this sound system in a well ventilated, cool, dry, clean place – away from direct sunlight, heat sources, v
Resumo do conteúdo contido na página número 5
BASIC SOUND FIELD ADDITIONAL ADVANCED OPERATION PROGRAMS INFORMATION INTRODUCTION PREPARATION OPERATION CONTENTS ENJOYING SURROUND SOUND.....................48 INTRODUCTION Enjoying multi-channel sources in surround ........... 48 Enjoying 2-channel sources in surround.................. 49 FEATURES............................................................. 2 Using Virtual CINEMA DSP .................................. 50 GETTING STARTED............................................ 3 RECORDING.
Resumo do conteúdo contido na página número 6
FEATURES FEATURES Built-in 7-channel power amplifier iPod controlling capability ◆ Minimum RMS output power ◆ DOCK terminal to connect a YAMAHA iPod universal dock (0.7% THD, 1 kHz, 8 Ω) (such as YDS-10 sold separately), which supports iPod (Click Front: 115 W + 115 W and Wheel), iPod nano, and iPod mini Center: 115 W Other features Surround: 115 W + 115 W ◆ YPAO (YAMAHA Parametric Room Acoustic Optimizer) for Surround back: 115 W + 115 W automatic speaker setup Sound field programs ◆ 192-kHz
Resumo do conteúdo contido na página número 7
INTRODUCTION GETTING STARTED GETTING STARTED Supplied accessories Check that you received all of the following parts. Remote control CODE SET TRANSMIT Batteries (2) AM loop antenna Optimizer microphone POWER POWER STANDBY POWER (AA, R6, UM-3) TV AV MD SLEEP CD CD-R XM CBL MULTI CH IN DVD DTV TUNER PHONO V-AUX DVR VCR AMP SOURCE TV VOL TV CH VOLUME TV TV MUTE TV INPUT MUTE STEREO MUSIC ENTERTAIN MOVIE 1 2 3 4 STANDARD SELECT EXTD SUR. PURE DIRECT 5 6 7 8 SPEAKERS ENHANCER NIGHT STRAIGHT Indoor FM
Resumo do conteúdo contido na página número 8
CONTROLS AND FUNCTIONS CONTROLS AND FUNCTIONS Front panel Note The XM Satellite Radio controlling functions in the following buttons (SEARCH MODE, CATEGORY, PRESET/TUNING/CH l / h, MEMORY, and DISPLAY) are only applicable to the U.S.A. model and are operational only when “XM” is selected as the input source. For details, see “XM Satellite Radio controls and functions” on page 60. 1 2 3 45 6 7 8 A 9 0 (U.S.A. model) VOLUME PURE DIRECT STANDBY /ON PRESET/TUNING FM/AM A/B/C/D/E PRESET/TUNING/CH
Resumo do conteúdo contido na página número 9
INTRODUCTION CONTROLS AND FUNCTIONS 8 PRESET/TUNING/CH l / h, LEVEL +/– F PROGRAM selector Selects one of the 8 preset station numbers (1 to 8) Selects sound field programs or adjusts the bass/treble when “TUNER” is selected as the input source. The balance in conjunction with TONE CONTROL (see colon (:) is displayed in the front panel display (see page 39). page 52). G TONE CONTROL Selects the tuning frequency when “TUNER” is Adjusts the bass/treble balance of the front left and right,
Resumo do conteúdo contido na página número 10
CONTROLS AND FUNCTIONS Remote control This section describes the function of each control on the remote control used to control this unit. To operate other components, see “REMOTE CONTROL FEATURES” on page 99. Notes The XM Satellite Radio controlling functions in the following buttons (XM, XM MEMORY, SRCH MODE, DISPLAY, cursor buttons u / d / j / i, numeric buttons and ENT.) are only applicable to the U.S.A. model and are operational only when “XM” is selected as the input source. For detai
Resumo do conteúdo contido na página número 11
INTRODUCTION CONTROLS AND FUNCTIONS 8 Cursor buttons u / d / j / i, ENTER I NIGHT Select and adjust the sound field program parameters or Turns on or off the night listening modes (see page 40). the “SET MENU” parameters. J SET MENU 9 RETURN Enters “SET MENU” (see page 85). Returns to the previous menu level when adjusting the K ON SCREEN “SET MENU” parameters. Selects the on-screen display (OSD) mode for your video 0 TRANSMIT indicator monitor (see page 47). Flashes while the remote control i
Resumo do conteúdo contido na página número 12
CONTROLS AND FUNCTIONS ■ Controlling the TUNER functions ■ Using the remote control Set the component selector switch to SOURCE and then The remote control transmits a directional infrared ray. press TUNER to select “TUNER” as the input source. Be sure to aim the remote control directly at the remote control sensor on this unit during operation. 4 Numeric buttons Use numbers 1 through 8 to select preset stations. (U.S.A. model) 7 BAND Switches the reception band between FM and AM VOLUME PURE D
Resumo do conteúdo contido na página número 13
INTRODUCTION CONTROLS AND FUNCTIONS Front panel display Note The XM indicator is only applicable to the U.S.A. model and the cursor on the left of the XM indicator lights up only when “XM” is selected as the input source. For details, see “Basic XM Satellite Radio operations” on page 62. 13 24568 7 9C 0AB D 96 pVCR pDVR pV-AUX pDTV/CBL pDVD pMD/CD-R pTUNER pCD pXM pPHONO t 24 VOLUME DOCK YPAO AUTO TUNED STEREO MEMORY MATRIX DISCRETE VIRTUAL SILENT CINEMA SP ENHANCER STANDARD A B NIGHT HiFi DSP
Resumo do conteúdo contido na página número 14
CONTROLS AND FUNCTIONS C MEMORY indicator O Input channel and speaker indicators Flashes to show that a station can be stored (see page 54). Presence speaker indicator D VOLUME level indicator L L C R Input channel indicator Indicates the current volume level. SL SB SR Surround back speaker indicator E PCM indicator Lights up when this unit is reproducing PCM (Pulse Code Input channel indicators Modulation) digital audio signals. Indicate the channel components of the current digital input sig
Resumo do conteúdo contido na página número 15
INTRODUCTION CONTROLS AND FUNCTIONS Rear panel 1 2 3 4 5 6 7 8 TUNER 75Ω UNBAL. AM FM GND ANT ANT AUDIO AUDIO DOCK COMPONENT VIDEO PHONO Y PB PR GND XM DVD SPEAKERS VIDEO PRESENCE DTV/ DIGITAL OUTPUT CBL MD/CD-R DVD PRE OUT CD FRONT SURROUND CENTER SURROUND BACK SINGLE DVR IN DTV/ OPTICAL (PLAY) CBL MD/ CD-R OUT IN MD/CD-R (REC) DVR MONITOR OUT SUBWOOFER DVD FRONT OUT A SURROUND DTV/CBL IN SURROUND VCR SURROUND BACK OUT CD B MONITOR OUT DVD FRONT CENTER SURROUND BACK COAXIAL SUB S VIDEO VIDEO W
Resumo do conteúdo contido na página número 16
CONNECTIONS CONNECTIONS Placing speakers * The speaker layout below shows the standard ITU-R Front left and right speakers (FL and FR) speaker setting. You can use it to enjoy CINEMA DSP and The front speakers are used for the main source sound plus multi-channel audio sources. effect sounds. Place these speakers at an equal distance from the ideal listening position. The distance of each * ITU-R is the radio communication sector of the ITU speaker from each side of the video monitor should
Resumo do conteúdo contido na página número 17
PREPARATION CONNECTIONS Connecting speakers Be sure to connect the left channel (L), right channel (R), “+” (red) and “–” (black) properly. If the connections are faulty, no sound will be heard from the speakers, and if the polarity of the speaker connections is incorrect, the sound will be unnatural and lack bass. CAUTION Before connecting the speakers, make sure that this unit is set to the standby mode (see page 31). Do not let the bare speaker wires touch each other or do not let them
Resumo do conteúdo contido na página número 18
CONNECTIONS FRONT terminals Speaker layout Connect one or two front speaker systems (6, 7) to these 2 terminals. If you use only one front speaker system, connect it to the FRONT A or B terminal. 3 6 1 CENTER terminals 4 7 Connect a center speaker (8) to these terminals. 8 SURROUND terminals 9 Connect surround speakers (4, 5) to these terminals. 5 10 SURROUND BACK terminals Connect a surround back speakers (9, 10) to these terminals. PRESENCE terminals Connect presence speakers (2, 3) to thes
Resumo do conteúdo contido na página número 19
PREPARATION CONNECTIONS ■ Connecting the speaker cable ■ Connecting to the PRESENCE speaker terminals Connect presence speakers to these terminals. 1 Remove approximately 10 mm (0.4 in) of insulation from the end of each speaker 1 Open the tab. cable and then twist the exposed wires of the cable together to prevent short circuits. 10 mm (0.4 in) 2 Loosen the knob. 2 Insert one bare wire into the hole on the side of each terminal. Red: positive (+) Black: negative (–) 3 Close the tab to secu
Resumo do conteúdo contido na página número 20
CONNECTIONS ■ Connecting the banana plug The banana plug is a single-pole electrical connector widely used to terminate speaker cables. Banana plug y You can also use the banana plug with the PRESENCE speaker terminals. Open the tab and then insert one banana plug into the hole on the side of each terminal. Do not close the tab after connecting the banana plug. 1 Tighten the knob. 2 Insert the banana plug connector into the end of the corresponding terminal. 16
