Resumo do conteúdo contido na página número 1
Model ST7001 User Guide
FM / AM Tuner
Resumo do conteúdo contido na página número 2
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within
Resumo do conteúdo contido na página número 3
IMPORTANT SAFETY INSTRUCTIONS READ BEFORE OPERATING EQUIPMENT This product was designed and manufactured to meet strict quality and 12. Grounding or Polarization – This product may be equipped with a safety standards. There are, however, some installation and operation polarized alternating-current line plug (a plug having one blade precautions which you should be particularly aware of. wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you
Resumo do conteúdo contido na página número 4
20. Servicing – Do not attempt to service this product yourself as 22. Replacement Parts – When replacement parts are required, be opening or removing covers may expose you to dangerous sure the service technician has used replacement parts specified voltage or other hazards. Refer all servicing to qualified service by the manufacturer or have the same characteristics as the personnel. original part. Unauthorized substitutions may result in fire, electric shock, or other hazards. 21. Damage Requ
Resumo do conteúdo contido na página número 5
CONTENTS FEATURES .............................................................................................................................................1 BEFORE USE .........................................................................................................................................2 PART NAMES AND FUNCTIONS ..........................................................................................................4 FRONT PANEL ............................................
Resumo do conteúdo contido na página número 6
ENGLISH BEFORE USE This section must be read before any connection is made to • Noise or disturbance tends to occur particularly when using indoor antennas or 300 Ω /ohms feeder wires. We the mains supply. recommend using outdoor antennas and 75 Ω /ohms coaxial cables. 7 EQUIPMENT MAINS WORKING Note SETTING For heat dispersal, do not install this equipment in a Your Marantz product has been prepared to comply with the confined space such as a book case or similar unit. household power and safety
Resumo do conteúdo contido na página número 7
BEFORE USE 7 7 Loading batteries Operating range of the remote Before using the supplied remote control unit for the first control unit time, load the batteries in the remote control unit. The • Point the remote control unit at the remote sensor on the batteries provided are used to verify the operations of the main unit as shown on the diagram. remote control unit only. • The remote control unit can be used from a straight distance of approximately 5 meters from the main unit, but 1. Take hold
Resumo do conteúdo contido na página número 8
ENGLISH PART NAMES AND FUNCTIONS FRONT PANEL For details on the functions of these parts, refer to the pages given in parenthesis. TUNING/PRESET FM/AM TUNER ST7001 STANDBY STANDBY SLEEP TIMER TUNED TUNED STEREO POWER POWER ON/STANDBY ON/STANDBY CATEGORY CATEGORY DISPLAY MENU MENU A—PRESET BAND SELECT PUSH ENTER PUSH ENTER e y o !1 !3 q w r t u i !0 !2 !4 q Power ON/STANDBY switch !1 TIMER indicator This is used to turn the unit’s power ON and STANDBY. This indicator illuminates while the timer p
Resumo do conteúdo contido na página número 9
PART NAMES AND FUNCTIONS REAR PANEL ANTENNA AC IN AC OUTLET ANALOG OUT REMOTE CONTROL 1 2 MODEL NO. ST7001 L L IN FM(75Ω ) GND AM RS-232C FLASHER IN XM R R OUT EXTERNAL SWITCHED INTERNAL 100W MAX ag b c d e f h i j a FM antenna terminal (75 ohms) h EXTERNAL/INTERNAL switch Connect an external FM antenna with a coaxial cable, or Before the unit was shipped from the factory, this switch was set to INTERNAL to enable the remote sensor built the supplied FM indoor antenna. into the unit to be used.
Resumo do conteúdo contido na página número 10
ENGLISH R E PART NAMES AND FUNCTIONS n MEMORY GROUP buttons (A/B, C/D, E/F, REMOTE CONTROL UNIT G/H, I/J) For details on the functions of these parts, refer to the pages Use these buttons to switch the preset channel’s shift given in parenthesis ( page 10 ~ 22). ☞ mode directly. m SLEEP button This button is used for setting the sleep timer. ( page ☞ STANDBY ON 22) z , , ON button 1 2 3 Press this button to switch from the standby mode to the operating mode. 456 . DISPLAY button x 7 8 9 This b
Resumo do conteúdo contido na página número 11
R E PART NAMES AND FUNCTIONS 7 Remote control code setting The remote control unit contains 3 sets of remote control STANDBY ON codes, and it can be used to control up to 3 tuners in one location. To control a second or third tuner, select the remote control code as explained below. The selected tuner 1 2 3 x can be operated from the remote control. • When the unit is shipped from the factory, the main unit 456 and remote control are set to TUNER1. 7 8 9 1. TUNER2 DIMMER DISPLAY To set the remot
Resumo do conteúdo contido na página número 12
ENGLISH CONNECTIONS CONNECTING THE ANTENNA TERMINALS FM outdoor antenna FM indoor antenna (Supplied) Use tape or a pin to fasten the tip of Direction of the antenna to the wall, a rack, etc. AM loop antenna broadcasting (Supplied) 75Ω /ohms station COAXIAL cable Ground AM outdoor antenna ANTENNA ANTENNA AC IN AC IN ANALOG OUT REMOTE CONTROL 1 2 MODEL MODEL NO. NO. ST7001 L L IN FM(75 FM(75Ω ) GND GND AM RS-232C FLASHER IN XM R OUT R EXTERNAL EXTERNAL INTERNAL 7 7 AM loop antenna assembly Conne
Resumo do conteúdo contido na página número 13
CONNECTIONS CONNECTING THE AMPLIFIER Note • Do not plug in the mains cord until all connections have been completed. • When making connections, also refer to the operating instructions of the other components. • Be sure to connect the left and right channels properly (left with left, right with right). • Note that binding pin-plug cords together with mains cords or placing them near a power transformer will result in generating hum or other noise. 7 Connecting the analog output connector Use the
Resumo do conteúdo contido na página número 14
ENGLISH OPERATION LISTENING TO FM/AM 7 Auto tuning (FM/AM) 1. Press the POWER ON/STANDBY switch q or ON 7 FM Auto preset memory button, to turn on the power. 1. Press the POWER ON/STANDBY switch q or ON 2. Watching the display, press the BAND SELECT button button, to turn on the power. !0 or BAND button c to select the desired band (AM or FM). 2. Watching the display, press the BAND SELECT button !0 or BAND buttonc to select the FM band. 3. Press the MENU buttonu or⁄2 to select menu. 3. Press th
Resumo do conteúdo contido na página número 15
R E OPERATION 7 Manual tuning (FM/AM) TUNING/PRESET TUNING/PRESET FM/AM TUNER ST7001 FM/AM TUNER ST7001 STANDBY STANDBY SLEEP SLEEP TIMER TIMER TUNED TUNED STEREO STEREO 1. Press the POWER ON/STANDBY switch q or ON POWER POWER ON/STANDBY ON/STANDBY CATEGORY CATEGORY DISPLAY DISPLAY MENU MENU A—PRESET PRESET BAND SELECT BAND SELECT button, to turn on the power. PUSH ENTER PUSH ENTER 2. Watching the display, press the BAND SELECT button !0 or BAND button c to select the desired band (AM or q u !0
Resumo do conteúdo contido na página número 16
ENGLISH OPERATION 7 7 Preset stations (FM/AM) Recalling preset stations (FM/AM) 1. Use the “Auto tuning” or “Manual tuning” operation to 1. Press the POWER ON/STANDBY switch q or ON tune in the station to be preset in the memory. button, to turn on the power. 2. Press the MENU buttonu or⁄2 to select menu. 2. Watching the display, press the BAND SELECT button !0 or BAND button c to select the desired band (AM or 3. Either turn the TUNING/PRESET knob !4 or press the FM). CHANNEL/CONTROL button⁄4 t
Resumo do conteúdo contido na página número 17
R E OPERATION 7 Registering station names TUNING/PRESET TUNING/PRESET FM/AM TUNER ST7001 FM/AM TUNER ST7001 STANDBY STANDBY SLEEP SLEEP TIMER TIMER TUNED TUNED STEREO STEREO (FM/AM only) POWER POWER ON/STANDBY ON/STANDBY CATEGORY CATEGORY DISPLAY DISPLAY MENU MENU A—PRESET PRESET BAND SELECT BAND SELECT PUSH ENTER PUSH ENTER 1. Use the procedure described at “Auto tuning”, “Manual tuning” or “Recalling preset stations” to tune in the desired frequency. q u i !0 !4 Example: To register “MARANTZ”
Resumo do conteúdo contido na página número 18
ENGLISH OPERATION LISTENING TO XM SATELLITE RADIO 7 XM Radio Overview Introducing XM Satellite Radio There’s a world of audio listening pleasure beyond AM and FM. XM Satellite Radio. Select from over 150 channels of music, news, sports, comedy, talk, and entertainment. Coast-to-coast coverage. Digital quality sound. With all music channels 100% commercial free. Questions?: Visit www.xmradio.com. How to Subscribe Listeners can subscribe by visiting XM on the Web at www.xmradio.com or by calling X
Resumo do conteúdo contido na página número 19
R E OPERATION 7 Checking the XM signal strength TUNING/PRESET TUNING/PRESET FM/AM TUNER ST7001 FM/AM TUNER ST7001 STANDBY STANDBY SLEEP SLEEP TIMER TIMER TUNED TUNED STEREO STEREO and Radio ID POWER POWER ON/STANDBY ON/STANDBY CATEGORY CATEGORY DISPLAY DISPLAY MENU MENU A—PRESET PRESET BAND SELECT BAND SELECT PUSH ENTER PUSH ENTER 1. Press the POWER ON/STANDBY switch q or ON button, to turn on the power. 2. Watching the display, press the BAND SELECT button q t i !0 !0 or BAND buttonc to select
Resumo do conteúdo contido na página número 20
ENGLISH R E OPERATION 7 Switching XM information in the TUNING/PRESET TUNING/PRESET FM/AM TUNER ST7001 FM/AM TUNER ST7001 STANDBY STANDBY SLEEP SLEEP TIMER TIMER TUNED TUNED STEREO STEREO front panel display POWER POWER ON/STANDBY ON/STANDBY CATEGORY CATEGORY DISPLAY DISPLAY MENU MENU A—PRESET PRESET BAND SELECT BAND SELECT PUSH ENTER PUSH ENTER You can display XM information (such as artist name, song title, category or signal status) for the channel currently selected in the front panel displa