Resumo do conteúdo contido na página número 1
UX-GN7V[US]EN-frontcover.fm Page 1 Friday, May 8, 2009 5:34 PM
MICRO COMPONENT SYSTEM
UX-GN7V
Consists of CA-UXGN7V and SP-UXGN9V
INSTRUCTIONS
LVT1990-006C
[US, UB, UW, UX, UA]
English
Resumo do conteúdo contido na página número 2
UX-GN7V[US]EN.book Page 1 Monday, January 19, 2009 11:51 AM Warnings, cautions and others CAUTION To reduce the risk of electrical shocks, fire, etc.: 1. Do not remove screws, covers or cabinet. 2. Do not expose this appliance to rain or moisture. CAUTION The F button in any position does not disconnect the mains line. Disconnect the mains plug to shut the power off completely (the STANDBY lamp goes off). The MAINS plug or an appliance coupler is used as the disconnect device, the disconne
Resumo do conteúdo contido na página número 3
UX-GN7V[US]EN.book Page 2 Monday, January 19, 2009 11:51 AM CAUTION — Proper Ventilation To avoid risk of electric shock and fire and to protect from damage, locate the apparatus as follows: Top/Front/Back/Sides: No obstructions should be placed in the areas shown by the dimensions below. Bottom: Place on the level surface. Maintain adequate air path for ventilation by placing on a stand with a height of 10 cm more. In addition, maintain the best possible air circulation. Front view of the
Resumo do conteúdo contido na página número 4
UX-GN7V[US]EN.book Page 1 Monday, January 19, 2009 11:51 AM Table of contents Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. Introduction Playing back sources from external devices Part description .............................3 Disabling the demonstration display ...............4 Playing back sources from Using the remote control .............
Resumo do conteúdo contido na página número 5
UX-GN7V[US]EN.book Page 2 Monday, January 19, 2009 11:51 AM Timer Convenient functions of disc/file playback Timer .............................................45 Using the sleep timer ....................................45 Convenient functions of disc/file Using the playback timer...............................46 playback .......................................25 Playing back a disc/file in the desired order Reference (Program playback) ....................................25 Playing back a
Resumo do conteúdo contido na página número 6
UX-GN7V[US]EN-02.fm Page 3 Thursday, February 5, 2009 10:54 AM Part description The numbers refer to the pages in which the parts are explained. Rear view Front view Refer to “Display window” shown on page 4. Remote control sensor ■Activating the buttons on the main unit ■Opening the front cover Before using the buttons on the main unit, place To use the buttons and terminals concealed under your hand over the front of the main unit. The but- the front cover, use your finger to pull open
Resumo do conteúdo contido na página número 7
UX-GN7V[US]EN-02.fm Page 4 Friday, May 8, 2009 5:37 PM Display window 1 The “USB” indicator lights up when a USB • The indicator lights up when an FM broad- device is selected as the source. cast is received in monaural. 2 Disc format indicators A The indicator lights up when the my sound • The “SVCD” indicator lights up when playing function is activated. back an SVCD. B Timer indicators • The “VCD” indicator lights up when playing • The indicator lights up when the playback ba
Resumo do conteúdo contido na página número 8
UX-GN7V[US]EN.book Page 5 Monday, January 19, 2009 11:51 AM Using the remote control The numbers refer to the pages in which the parts Inserting the batteries into are explained. the remote control Insert the batteries into the remote control by matching the polarity (+ and −) correctly. R03 (UM-4)/AAA (24F) type dry-cell batteries (supplied) • If the range or effectiveness of the remote con- trol decreases, replace both batteries. Operating the system from the remote control Point the r
Resumo do conteúdo contido na página número 9
UX-GN7V[US]EN.book Page 6 Monday, January 19, 2009 11:51 AM Preparation Do not connect the power cable until all other connections have been made. FM antenna (supplied) Connecting the antennas FM antenna Main unit (rear view) AM loop antenna (supplied) Setting up the AM loop antenna Stretch out the FM antenna to the best position for radio reception. When radio reception with the supplied FM antenna is poor, or when using a communal antenna Main unit (rear view) Antenna cable Commun
Resumo do conteúdo contido na página número 10
UX-GN7V[US]EN-03.fm Page 7 Thursday, February 5, 2009 9:53 AM Preparation (continued) Do not connect the power cable until all other connections have been made. Connecting the speakers Connect the speakers to the main unit by connecting the colored cables to the same color terminals on the rear of the main unit. Right speaker Left speaker (rear view) (rear view) Speaker cable Red Black Main unit (rear view) If insulation covers the tips of the speaker cables, twist and pull off the insula
Resumo do conteúdo contido na página número 11
UX-GN7V[US]EN.book Page 8 Monday, January 19, 2009 11:51 AM ■ IMPORTANT Connecting a TV • Connect the main unit directly to a TV (or a mon- itor) without routing through a video cassette After connecting a TV, follow the instructions on recorder (VCR). Otherwise picture distortion page 10. may occur during playback. (Routing the con- nection through a VCR, however, does not affect Connecting a TV with the the audio quality.) [COMPONENT] terminals Main unit TV Main unit (rear view) TV (
Resumo do conteúdo contido na página número 12
UX-GN7V[US]EN.book Page 9 Monday, January 19, 2009 11:51 AM Preparation (continued) Do not connect the power cable until all other connections have been made. Connecting an external Connecting a subwoofer digital audio device When you connect this system with an amplifier- built-in subwoofer (not supplied), you can enjoy a more dynamic bass sound. Refer to the manual of Main unit the subwoofer for details. (rear view) Audio cable (not supplied) Output (Use the audio cable supplied with t
Resumo do conteúdo contido na página número 13
UX-GN7V[US]EN.book Page 10 Monday, January 19, 2009 11:51 AM 1 Turn on the main unit. Selecting the video signal • Refer to “Turning on/off the main unit” on page 11. type 2 Press [SCAN MODE] repeatedly to To view an image on the TV screen, select the video signal type correctly according to the TV select the video signal type suit- after connecting the main unit to the TV. able for the TV. • Select “PAL” for a TV only compatible with a PAL interlaced video signal. • Select “PAL PRG”
Resumo do conteúdo contido na página número 14
UX-GN7V[US]EN.book Page 11 Monday, January 19, 2009 11:51 AM Basic operations Turning on/off the main unit Press [AUDIO/TV F] (or F on the main unit). Number • The power of the main unit turns on and the buttons [STANDBY] lamp on the main unit turns off. • Press [AUDIO/TVF] (or F on the main unit) again to turn off the power of the main unit. (The main unit enters the standby mode.) • With the power off, pressing [DVD/CD 6], [USB 6], [TUNER], [AUDIO IN] or 0 also turns on the main un
Resumo do conteúdo contido na página número 15
UX-GN7V[US]EN.book Page 12 Monday, January 19, 2009 11:51 AM NOTE Customizing the equalization • You can cancel the setting by pressing [MY pattern SOUND]. Audible sound frequencies vary according to the Selecting the preset equalization individual. This function creates the appropriate pattern equalization pattern according to your hearing preferences. This function is called “My Sound”. Press [MY SOUND]. ■When a disc/file is stopped • Each time you press [MY SOUND], the preset 1 Hol
Resumo do conteúdo contido na página número 16
UX-GN7V[US]EN-04.fm Page 13 Wednesday, April 8, 2009 10:26 AM Basic operations (continued) Sharpening the voice sound Setting the clock This function allows you to easily understand dia- You can set the clock when the main unit is on or log recorded on the disc/file even with the volume off. down low. This function is useful when you are 1 Press [CLOCK/TIMER] repeatedly watching a movie. to select the clock in the display Press [C.VOICE] while holding down window. [SHIFT]. • Each tim
Resumo do conteúdo contido na página número 17
UX-GN7V[US]EN-04.fm Page 14 Friday, February 13, 2009 9:54 AM For the locations of the remote control buttons, refer to page 11. Changing the brightness of Auto standby function the display window If no sound is produced for 3 minutes, the main unit automatically turns off. ■When the main unit is turned on This function is available when a loaded disc or a connected USB device is selected as the source. Press [ECO/DIMMER] repeatedly. • Each time you press [ECO/DIMMER], the setting Act
Resumo do conteúdo contido na página número 18
UX-GN7V[US]EN-05.fm Page 15 Tuesday, February 10, 2009 6:03 PM Listening to radio broadcasts Setting the AM tuner spacing AM stations are spaced 9 kHz apart in some coun- tries and 10 kHz in other countries. Main unit (front view) Number buttons * 1 Press [TUNER] repeatedly to select “TUNER AM” in the display win- dow. 2 Press [AUDIO/TV F] (or F on For the number button usage, refer to “Using the * the main unit) to turn off the number buttons” on page 11. power. 3 Hold down [CD 3 USB R
Resumo do conteúdo contido na página número 19
UX-GN7V[US]EN-05.fm Page 16 Thursday, February 5, 2009 10:05 AM Selecting a radio station Tuning in to a preset radio station 1 Press [TUNER] to select “TUNER Presetting radio stations in the main unit allows FM” or “TUNER AM” in the display you to easily tune in to a radio station. You can window. store up to 30 FM radio stations and up to 15 AM • Pressing [TUNER] selects a radio broadcast radio station. as the sound source. Presetting radio stations 2 Hold down 4 or ¢. 1 Select a ra
Resumo do conteúdo contido na página número 20
UX-GN7V[US]EN.book Page 17 Monday, January 19, 2009 11:51 AM Playing back sources from external devices Playing back sources from external devices 1 Press [AUDIO IN]. • “AUDIO IN” is selected as the source in the display window. 2 Start playback on the connected device. 3 Adjust the volume or the sound settings for your preference. • Refer to page 11. NOTE • Before connecting or disconnecting an external device, press [VOLUME ] repeatedly to set the volume of this system to the minimum
