Resumo do conteúdo contido na página número 1
4-238-377-12(2)
FM Stereo
FM-AM Receiver
GB
Operating Instructions
Owner’s Record
The model and serial numbers are located on the rear panel. Record the serial number
in the space provided below. Refer to them whenever you call upon your Sony dealer
regarding this product.
Model No. HT-DDW840/DDW740 Serial No.
HT-DDW840
HT-DDW740
© 2002 Sony Corporation
Resumo do conteúdo contido na página número 2
– Reorient or relocate the receiving antenna. WARNING – Increase the separation between the equipment and receiver. To prevent fire or shock hazard, do not – Connect the equipment into an outlet on a circuit expose the unit to rain or moisture. different from that to which the receiver is connected. To prevent fire, do not cover the ventilation of the – Consult the dealer or an experienced radio/TV apparatus with newspapers, table-cloths, curtains, etc. technician for help. And don’t place light
Resumo do conteúdo contido na página número 3
Table of Contents List of Button Locations and Other Operations Reference Pages Naming preset stations and program sources ........................................... 36 Main unit ............................................... 5 Recording ............................................ 36 Hooking Up the Components Using the Sleep Timer ......................... 37 Adjustments using the SET UP Required cords ....................................... 6 button ..........................................
Resumo do conteúdo contido na página número 4
About This Manual Note for the supplied remote The instructions in this manual are for models For RM-PP411 (HT-DDW840 only) HT-DDW840 and HT-DDW740. Check your model The VIDEO 3, TV/SAT, PHONO, AUX, number by looking at the lower right corner of the front panel. In this manual, the HT-DDW840 is used SOURCE, MPX/DUAL, ANALOG DIRECT, for illustration purpose unless stated otherwise. Any 12 and ON SCREEN buttons on the remote are difference in operation is clearly indicated in the text, not availab
Resumo do conteúdo contido na página número 5
List of Button Locations and Reference Pages List of Button Locations and Reference Pages Illustration number r How to use this page NAME 8 (36) Use this page to find the location of buttons that RR are mentioned in the text. Name of button/part Reference page Main unit FM MODE (Models of area code PRESET TUNING +/– (Except ALPHABETICAL ORDER CEL, CEK only) ed, (Except for for models of area code CEL, models of area code CEL, CEK) CEK) 3 (33, 54) 0 – 9 ef (32) PTY (models of area
Resumo do conteúdo contido na página número 6
Hooking Up the Components Required cords A Audio cord (not supplied) White (L) White (L) Red (R) Red (R) B Audio/video cord (not supplied) Yellow (video) Yellow (video) White (L/audio) White (L/audio) Red (R/audio) Red (R/audio) C Video cord (not supplied) Yellow (video) Yellow (video) D Optical digital cord (not supplied) Black Black E Coaxial digital cord (supplied) Orange Orange F Monaural audio cord (not supplied) Black Black Before you get started • Turn off the power to all components befo
Resumo do conteúdo contido na página número 7
Hooking Up the Components Antenna hookups AM loop antenna (supplied) FM wire antenna* (supplied) DIGITAL ANTENNA OPTICAL VIDEO 2 IN MONITOR AM VIDEO OUT VIDEO IN VIDEO IN VIDEO OUT VIDEO IN FM 75Ω COAXIAL DVD/LD IN COAXIAL L AUDIO OUT L CENTER R R SUB IN OUT IN AUDIO IN AUDIO IN AUDIO OUT AUDIO IN SUB FRONT SURROUND WOOFER CD MD/TAPE DVD/LD VIDEO 2 VIDEO 1 WOOFER MULTI CH IN * The shape of the connector varies depending on the area code. Notes on antenna hookups • To prevent noise pickup, k
Resumo do conteúdo contido na página número 8
ç Audio component hookups MD or Tape deck INPUT OUTPUT LINE LINE L R A A OUT IN DIGITAL ANTENNA OPTICAL VIDEO 2 IN MONITOR AM VIDEO OUT VIDEO IN VIDEO IN VIDEO OUT VIDEO IN FM 75Ω COAXIAL DVD/LD IN COAXIAL L AUDIO OUT L CENTER R R SUB IN OUT IN AUDIO IN AUDIO IN AUDIO OUT AUDIO IN SUB FRONT SURROUND WOOFER CD MD/TAPE DVD/LD VIDEO 2 VIDEO 1 WOOFER MULTI CH IN A OUTPUT LINE L R CD player GB 8 ç
Resumo do conteúdo contido na página número 9
Hooking Up the Components Ç Ç Video component hookups DVD or LD player OUTPUT AUDIO OUT VIDEO R L OUT B DIGITAL ANTENNA OPTICAL VIDEO 2 IN MONITOR AM VIDEO IN VIDEO IN VIDEO OUT VIDEO IN VIDEO OUT FM 75Ω COAXIAL DVD/LD IN COAXIAL L AUDIO OUT L CENTER R R SUB IN OUT IN AUDIO IN AUDIO IN AUDIO OUT AUDIO IN SUB FRONT SURROUND WOOFER CD MD/TAPE DVD/LD VIDEO 2 VIDEO 1 WOOFER MULTI CH IN OUT IN IN B BB C INPUT OUTPUT OUTPUT INPUT VIDEO VIDEO VIDEO VIDEO OUT IN OUT IN TV tuner, AUDIO AUDIO AUDIO O
Resumo do conteúdo contido na página número 10
Digital component hookups Connect the digital output jacks of your DVD player and satellite tuner (etc.) to the receiver’s digital input jacks to bring the multi channel surround sound of a movie theater into your home. To fully enjoy multi channel surround sound, five speakers (two front speakers, two surround speakers, and a center speaker) and a sub woofer are required. You can also connect an LD player with an RF OUT jack via an RF demodulator, like the Sony MOD-RF1 (not supplied). Notes • Y
Resumo do conteúdo contido na página número 11
Hooking Up the Components Multi channel input hookups HT-DDW840 only Although this receiver incorporates a multi channel decoder, it is also equipped with multi channel input jacks. These connections allow you to enjoy multi channel software encoded in formats other than Dolby Digital and DTS. If your DVD player is equipped with multi channel output jacks, you can connect them directly to the receiver to enjoy the sound of the DVD player’s multi channel decoder. Alternatively, the multi channel
Resumo do conteúdo contido na página número 12
Other hookups SPEAKERS SPEAKERS IMPEDANCE USE 8 IMPEDANCE USE 8 – – 16 16ΩΩ SURROUND CENTER FRONT RL RL RL RL b To a wall outlet AC power cord Setting the voltage selector Connecting the AC power cord If your receiver has a voltage selector on the rear panel, check that the voltage selector is set Before connecting the AC power cord of this to the local power supply voltage. If not, use a receiver to a wall outlet, connect the speaker screwdriver to set the selector to the correct system to the
Resumo do conteúdo contido na página número 13
Hooking Up and Setting Up the Speaker System Hooking Up and Setting Up the Speaker System Speaker system hookups Required cords A Speaker cords (supplied) (+) (+) (–)(–) B Monaural audio cord (supplied) Black Black Active sub woofer Front speaker (R) Front speaker (L) INPUT AUDIO IN B A A MONITOR VIDEO OUT SPEAKERS SPEAKERS IMPEDANCE USE 8 IMPEDANCE USE 8 – – 16 16ΩΩ SURROUND CENTER FRONT RL RL AUDIO OUT RL RL SUB WOOFER A AA E Surround speaker Surround speaker Center speaker (R) (L) continued G
Resumo do conteúdo contido na página número 14
Speaker system hookup (continued) Examples of poor conditions of the speaker cord Tip To prevent speaker vibration or movement while listening, attach the supplied foot pads at the bottom of the speakers. Stripped speaker cord is touching another speaker terminal. Notes • Connect the long speaker connecting cords to the surround speaker terminals and the short speaker connecting cords to the front and center speaker terminals. • Twist the stripped ends of the speaker cords about 10 mm (2/3 inch)
Resumo do conteúdo contido na página número 15
Hooking Up and Setting Up the Speaker System Performing initial setup Performing initial setup operations operations Before using your receiver for the first time, adjust SET UP parameters so that the receiver Once you have hooked up the speakers and correspond to your system. For the adjustable turned on the power, clear the receiver’s parameters, see the table on page 57. See pages memory. Then specify the speaker parameters 15–20 for speaker settings and pages 37–38 for (size, position, etc.)
Resumo do conteúdo contido na página número 16
If you change the speaker system, select Multi channel surround setup (continued) NORM. SP. You can adjust the speaker size and subwoofer selection when you select NORM. SP. (page 18). To select NORM. SP., turn off the power, then When placing surround speakers behind you turn on again while pressing LEVEL. (To reset to MICRO SP., do the same procedure.) B Tip A A The setting for Micro Satellite Speaker (MICRO SP.) 45° has been programmed to optimize the sound balance. If you use Sony’s Micro Sa
Resumo do conteúdo contido na página número 17
Hooking Up and Setting Up the Speaker System For example, setting the center speaker distance L x Front speaker distance ( R DIST. 1~2 m (3~6 feet) closer than the actual speaker XX.X m (ft.)) position will create a fairly realistic sensation of being “inside” the screen. If you cannot obtain a satisfactory Set the distance from your listening position to surround effect because the surround speakers are too the front speakers (A on page 15). close, setting the surround speaker distance closer (
Resumo do conteúdo contido na página número 18
Therefore, although it may result in a setting contrary Multi channel surround setup to the “Surround speaker position” explanation, we (continued) recommend that you playback multi channel surround encoded software and listen to the effect each setting SL SR x Surround speaker height ( has on your listening environment. Choose the setting that provides a good sense of spaciousness and that HGT. XXX)* best succeeds in forming a cohesive space between This parameter lets you specify the height o
Resumo do conteúdo contido na página número 19
Hooking Up and Setting Up the Speaker System Tip C x Center speaker size ( ) Internally, the LARGE and SMALL settings for each • If you connect a large speaker that will speaker determine whether or not the internal sound processor will cut the bass signal from that channel. effectively reproduce bass frequencies, select When the bass is cut from a channel, the bass “LARGE”. Normally, select “LARGE”. redirection circuitry sends the corresponding bass However, if the front speakers are set to fre
Resumo do conteúdo contido na página número 20
Multi channel surround setup Listening to the subwoofer (continued) Adjusting the speaker level Use the remote while seated in your listening position to adjust the level of each speaker. POWER indicator Note The receiver incorporates a new test tone with a frequency centered at 800 Hz for easier speaker level First, turn down the volume on the receiver. adjustment. The volume should be set to minimum before you begin playing the programme source. 1 Press ?/1 to turn on the receiver. 2 Press TES
