Resumo do conteúdo contido na página número 1
O W NER’S MANUAL
GEQ 215
Graphic Equalizer
EQUALIZERS
Resumo do conteúdo contido na página número 2
Resumo do conteúdo contido na página número 3
GEQ 215 Graphic Equ alizer Congratulations on your choice of the GEQ 215 graphic equalizer — you have purchased one of the finest graphic equalizers on the market today. This unit was developed using the expertise of professional sound engineers and working musicians. You will find that your new NADY AUDIO Equalizers has superior performance and greater flexibility than any other equalizers in its price range. Please read this manual carefully to get the most out of your new unit. Thanks for
Resumo do conteúdo contido na página número 4
WARNING An equilateral triangle enclosing a lightning flash/arrowhead symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure which may be of sufficient magnitude to constitute a risk of electric shock. ATTENTION: RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR An equilateral triangle enclosing an exclamation point is intended to alert the user to the presence of important operating and service instructions in the literature enclosed w
Resumo do conteúdo contido na página número 5
INSTALLATION To ensure years of enjoyment from your NADY AUDIO graphic Check to see that the unit is set to the voltage for your area by equalizer, please read and understand this manual thoroughly referring to the table below: before using the unit. Europe (except UK): 230V, 50Hz The GEQ-215 is designed for mounting in a standard 19” equip- UK and Australia: 240V, 50Hz ment rack or one of the many rack type portable cases available USA and Canada: 115V, 60 Hz on the market. The unit is 1u sin
Resumo do conteúdo contido na página número 6
OpERATING INSTRUCTIONS Before starting to equalize your sound system there is some information you should know and procedures you should follow: 1. Set channel levels to the center detent (0dB-unity gain) on the front panel. 2. Enable the BYPASS switch (Note: The amber LED is ON). 3. Set all slide controls to the center detent or 0dB (unity gain) position. 4. Select the 6dB range switch (green LED ON). 5. Apply signal to the system. 6. Disable the BYPASS switch, amber LED OFF. 7. If the C
Resumo do conteúdo contido na página número 7
FRONT pANEL CONTROLS & CONNECTIONS 2 5 4 3 6 1 1. power Switch To turn the equalizer ON or OFF, press the upper or lower portion of this button. CAUTION: Always turn on your equalizer BEFORE your power amplifiers are turned on, and always turn off your equalizer AFTER your power amplifiers have been turned off. 2. Level Control This controls the level of signal to the equalizer. It is capable of +/- 6dB of gain.This control is used to adjust for variation in input level to the equal
Resumo do conteúdo contido na página número 8
REAR pANEL CONTROLS & CONNECTIONS 7 8 9 10 11 7. IEC power Cord Receptacle This is used to connect the AC power source to your equalizer. Power requirements: 115/230VAC, 50/60Hz 8. AC Voltage Selector Set this slide switch to match your line voltage supply. CAUTION: For new installations and portable sound systems, or in any situation in which the AC power is suspect, it is wise to confirm appropriate voltage and line polarity BEFORE connecting the instrument to the power source. 9. Fuse Ho
Resumo do conteúdo contido na página número 9
TYpICAL SET-Up The GEQ-215 graphic equalizer may be used wherever modification of the frequency contour of a sound system is needed. A graphic equalizer is a solution to any number of sound problems or creative urges. SOUND REINFORCEmENT AppLICATIONS By routing the signal from the mixer to the main power amplifiers (or crossover), the overall frequency of the mix may be altered to do a number of things. A. Through the use of a real-time audio spectrum analyzer, a calibrated microphone, and a p
Resumo do conteúdo contido na página número 10
SpECIFICATIONS EqUALIzER: Line Voltage Equalizer Control Bands 100-130V AC, 50/60Hz 2X15, 2/3 Octave ISO Spacing From 25Hz to 16KHz 200-240V AC, 50Hz Filter Type power Consumption Constant Q Maximum: 15 watts Slider Travel SIzE: 20mm (Center Detent) 19”W X 1.75”H X 8.66”D (1U) (48.2cm X 4.4cm X 12.7cm) Level Control Range +/-6dB or +/-12dB (Selectable) WEIGHT: 6.16lbs. (2.8Kg.) INpUTS: Type The specifications above are correct at the time of printing of
Resumo do conteúdo contido na página número 11
ONE YEAR LImITED WARRANTY Nady Systems, Inc. warrants to the original consumer purchaser that the unit is free from any defects in material or workmanship for a period of one year from the date of original retail purchase. If any such defect is discovered within the warranty period, Nady Systems, Inc. will repair or replace the unit free of charge, subject to verification of the defect or malfunction upon return to Nady Systems. Please do not return your Nady product to the store where it was
Resumo do conteúdo contido na página número 12
SERVICE FOR YOUR NADY AUDIO PRODUCT In the U.S. If you are experiencing operational problems with your system, please refer to the Support page at www. nady.com for assistance. Should your wireless system require service, please contact the Nady Service Department at (510) 652-2411 for a Return Authorization (R/A) Number and service quote (if out of warranty). Make sure the R/A Number is clearly marked on the outside of the package that you are returning. If your unit is out of warranty, plea
