Manual do usuário Genz-Benz 200

Resumo do conteúdo contido na página número 1

OWNERS MANUAL
PRODUCT DESCRIPTION – The Shenandoah Stereo Delux 200™ is a 2 channel – 4 input, 200 watt true
Each channel is equipped with both a ¼” unbalanced line input and an XLR balanced microphone input (with
phantom power). The 2 inputs on each channel are summed (mixed) together at a 1:1 ratio. Each channel then
passes through independent 4 band equalizers with 2 sweep-able midrange frequency bands. This powerful
shaping.
Each channel also contains 2 individual send controls to the dual o

Resumo do conteúdo contido na página número 2

INPUTS – The Shenandoah™ 200 is equipped with 2 types of input jacks. The ¼” input is unbalanced and “line/ instrument level” with a useable sensitivity from 50 mV to 1 volt. The input impedance is 150 k ohms. The ¼” input will also accept most active balanced line sources, automatically unbalancing them by recognizing the tip portion of interference) to eliminate unwanted noise. The XLR input jack is balanced and “microphone level”, with a useable sensitivity from –60dBv to –30 dBv. It contains

Resumo do conteúdo contido na página número 3

ACTIVE 4 BAND EQUALIZATION – Each channel of the Shenandoah 200 contains a separate 4 band (with 2 sweepable mids) active equalizer. These equalizers, similar to those found on professional sound consoles, are very useful tools when used correctly. LOW FREQUENCY EQ - The corner frequency of the low frequency section is 85 Hz, with a shelving curve type. This frequency is particularly handy when dealing with low frequency feedback from a big dreadnaught guitar, cello or upright bass. With a “boom

Resumo do conteúdo contido na página número 4

MASTER STATUS LED INDICATORS - Output status LED’s are provided to indicate Signal present and Clipping. The Green LED monitors the pre Master Volume output signal from the preamp before the power amp section. The Red LED indicates Clip/Limit and indicates that the maximum power threshold has been crossed and the internal “soft-clip” limiter is active. Driving the amp 6db beyond this point will cause gradual clipping. CHANNEL INSERTS / EFFECTS LOOP – The Shenandoah™ 200 is equipped with insert

Resumo do conteúdo contido na página número 5

SHENANDOAH™ STEREO DELUX 200 ENGINEERING SPECIFICATIONS INPUTS XLR Balanced channel input impedance: 2.2 k ohms XLR Balanced channel input sensitivity: -60 to –30 dBV ¼” Unbalanced channel input impedance: 150 k ohms ¼” Unbalanced channel input sensitivity: 30 to +4 dBV ¼” Unbalanced aux input impedance: 10 k ohms ¼” Unbalanced aux input sensitivity: -20 to +4 dBV Phantom power (XLR Inputs) +13.6V AMPLIFIER OUTPUT (each channel) Power at 8 ohm load: 70 watts RMS Power a

Resumo do conteúdo contido na página número 6

CAUTION! WARNING! • The use and operation of this device constitutes an agreement of full release of any and all liability connected with its use. Only persons familiar with the operation of high powered audio equipment should attempt to operate this device. • In addition, by use of this device, the user agrees to hold Genz Benz Enclosures, Inc. and its designers, or loss resulting from such use. normal operating conditions for a period of 3 years. WARRANTY: • Genz Benz Enclosures, Inc. warr