Resumo do conteúdo contido na página número 1
®
Crown Power Amplifiers
Resumo do conteúdo contido na página número 2
Resumo do conteúdo contido na página número 3
INSTALLED SOUND CTs 2-Channel Series CTs Multi-Channel Series TM CTs Multi-Channel with CobraNet CDi Series DSi Series
Resumo do conteúdo contido na página número 4
AMPLIFIERS INSTALLED SOUND CTs Series: The New Standard CTs 600, CTs 1200, CTs 2000, CTs 3000 Foundation FEATURES • High power density. All two channel models in a 2U chassis. • New Crown Switching Power Supply for lighter weight. • Selectable “Constant-Voltage” or low-impedance operation per channel. • 100V direct outputs on all models. • Fully PIP2-compatible. POWER OUTPUT* 2-ohm D
Resumo do conteúdo contido na página número 5
SPECIFICATIONS Ready Indicator: Green LED, one per channel, Highpass Filter: One 3-position switch per Frequency Response (at 1 watt, 20 Hz - 20 illuminates when the channel is initialized and channel selects between OFF, 35Hz and 70Hz kHz): ±0.25 dB. ready to produce audio output. Indicator is off 3rd-order filters. Signal to Noise Ratio below rated power (20 when PIP puts the amplifier in standby mode via Hz to 20 kHz): 105 dB A-weighted. “Y” Input Switch: When set to ON, this switch
Resumo do conteúdo contido na página número 6
AMPLIFIERS INSTALLED SOUND CTs Multi-Channel Series: The New Standard CTs 4200, CTs 8200 Flexibility FEATURES • High power density: Four-channel model in a 2U chassis, eight-channel model in a 3U chassis. • New Crown Switching Power Supply for lighter weight. • Selectable “Constant-Voltage” or low-impedance (4/8 ohm) operation per channel-pair. • 100V direct outputs. • New “FIT” (Fault Isolation Topology) circuitry isolates fault conditions without affecting neighboring channels. • Ac
Resumo do conteúdo contido na página número 7
SPECIFICATIONS Signal Indicator: Green LED, one per channel, Protection Systems Frequency Response (at 1 watt, 20 Hz - 20 kHz): illuminates to indicate the presence of analog input Thermal Level Control (TLC): If an amplifier chan- ±0.5 dB. signals above –40 dBu. nel starts to overheat, the TLC circuit will engage Phase Response (at 1 watt, 10 Hz - 20 kHz): ±35°. that channel’s input compressor. By compress- Clip Indicator: Red LED, one per channel, illumi- Signal to Noise Ratio below rate
Resumo do conteúdo contido na página número 8
AMPLIFIERS INSTALLED SOUND CTs Multi-Channel Series: With CobraNet CTs 4200USP/CN, CTs 8200USP/CN TM CobraNet Capable FEATURES (input module) • 100 Mbps Ethernet single-plug solution for CobraNet audio, and HiQnet™ control and monitoring. • Analog audio inputs allow CobraNet network audio input, CobraNet audio backup, or a hardwire emergency override of CobraNet audio. • 24 bit digital to analog conversion with 32 bit, floating point DSP processing. • Firmware upgrades via the networ
Resumo do conteúdo contido na página número 9
SPECIFICATIONS D/A and A/D Conversion: 24 bit. IQ Data Indicator USP/CN CobraNet Module Specifications Flashes when the module receives a valid (for amplifier specifications, see the CTs Multi- Latency: Channel Series pages) command that is addressed to the CTs 4200 DSP processing: 1 ms or 1000 µs. USP/CN and CTs 8200USP/CN. Digital-to-analog conversion: 250 µs. Connectors: Analog-to-digital conversion: 250 µs. Switches: AUX Connector Amplifier: 100 µs. Reset/Preset Switch Configurable
Resumo do conteúdo contido na página número 10
AMPLIFIERS INSTALLED SOUND CDi Series: 2/4/8 Ohm, 70V/100V per channel CDi 1000, CDi 2000, CDi 4000, CDi 6000 Versatility FEATURES • Onboard digital signal processing includes crossovers, EQ filters, delay, and output limiting. • Computer connectivity via USB allows fast setup and configuration with HiQnet™. • Barrier strip outputs, removable Phoenix-style input. • Extremely versatile, handling a wide range of speaker impedances and outputs. • Switch-mode universal power supply. • Speaker
Resumo do conteúdo contido na página número 11
SPECIFICATIONS Output EQ: 8 parametric filters per channel with Output Connectors: 4-position barrier strip with Performance adjustable Q, ±15 dB boost/cut. This 8-filter EQ connectors for dual louspeakers or bridge-mono Output Power: See power charts below. section can NOT be bypassed. Filters are enabled loudspeaker. Dual connectors work with 2-8 Voltage Gain at 1kHz: individually. ohm or 70V/100V loads. Bridge-mono connec- CDi 1000: 30.5 dB tors work with 4-8 ohm or 140V loads. Delay: U
Resumo do conteúdo contido na página número 12
AMPLIFIERS INSTALLED SOUND DSi Series: 2, 4, 8 ohm DSi 1000, DSi 2000, DSi 4000, DSi 6000 One-touch Performance FEATURES • Intuitive front-panel LCD screen, automatic presets for popular JBL speaker systems for quick, easy configuration. • Onboard digital signal processing includes crossovers, EQ filters, delay, and output limiting. • Computer connectivity via USB allows fast setup and configura- tion with HiQnet™. • Barrier strip outputs, removable Phoenix-style input. ® • All models are
Resumo do conteúdo contido na página número 13
SPECIFICATIONS Performance DSP Section Rear Panel Controls and Connectors Voltage Gain at 1kHz: Input EQ: 6 parametric filters per channel AC Line Connector: with adjustable Q, ±15 dB boost/cut. Also DSi 1000: 30.5 dB DSi 1K, 2K, 4K: NEMA 5-15P (15A). adjustable high and low shelving filters. This DSi 2000: 32.9 dB DSi 6000: NEMA 6-10P (20A) 8-filter EQ section can be bypassed. DSi 4000: 34.2 dB IEC C20 (20A). Crossover Filters: Highpass and lowpass DSi 6000: 37.1 dB Input Connector: Tw
Resumo do conteúdo contido na página número 14
Resumo do conteúdo contido na página número 15
COMMERCIAL AUDIO Preamplifier-Mixers Amplifiers Mixer-Amplifiers XM Business Music Systems
Resumo do conteúdo contido na página número 16
COMMERCIAL AUDIO PREAMPLIFIER-MIXERS 14M, 28M Adaptable FEATURES • 4 or 8 inputs, 1 or 2 output channels. • Ideal for commercial and industrial use. • Balanced Phoenix-type mic/line inputs; RCA inputs. • Balanced Phoenix-type line outputs. • Any input can be sent to any output. • Priority muting. • Independent bass and treble controls for each input. Model Inputs System Zones 14M 4 Single-zone 28M 8 Two-zone
Resumo do conteúdo contido na página número 17
SPECIFICATIONS Performance Tone Controls: Bass and Treble non-detented Line Out Connector: One 3-pin balanced Phoe- Frequency Response (at line out): 20 Hz to 20 potentiometers on each input channel. Bass nix-type connector per output channel. Level kHz +/- 1 dB. ±10 dB at 100 Hz, Treble ±10 dB at 10 kHz. controlled by master volume control. Signal to Noise Ratio (master volume at Power Indicator: Blue LED indicates power on. Input Connectors: minimum): 100 dB. Mic/Line Connector: 3-pin Ph
Resumo do conteúdo contido na página número 18
COMMERCIAL AUDIO AMPLIFIERS 180A, 280A, 1160A Power Zone FEATURES • Ideal for commercial and industrial use. • Balanced Phoenix-type line inputs; touch-proofed screw-terminal speaker outputs. • Advanced protection system includes output current limiting, DC protection, circuit breaker/fuse, and thermal protection. • 1 or 2 inputs; 1 to 2 amplifier output channels. POWER OUTPUT* Models 4-ohm 70V/100V Inputs System Zones 180A 80W 80W 1 Single-zone 280A 80W 80W 2 Two-zon
Resumo do conteúdo contido na página número 19
SPECIFICATIONS Performance Output Signal Presence Indicator: Green LED, Protection Frequency Reponse (at 1 watt from 4-ohm one for each output channel, illuminates when Current Limit Protection: Included. tap): 70 Hz to 19 kHz +/- 1 dB. output signal level exceeds 100 mV (45 dB Thermal Limit Protection: Over-temperature Frequency Response (at line out): 20 Hz to 20 below full power) from the 4-ohm tap. thermal cutout. kHz +/- 1 dB. Clip Indicators: Red LED, one per output DC-Fault Load
Resumo do conteúdo contido na página número 20
COMMERCIAL AUDIO AMPLIFIERS 660A 6-Channel FEATURES • 6 inputs; 6 amplifier output channels. • Balanced Phoenix-type line inputs; touch-proof screw-terminal speaker outputs. • Advanced protection system includes output current limiting, DC protection, circuit breaker/fuse, and thermal protection. • Ideal for commercial and industrial use. POWER OUTPUT* Model 4-ohm 70V/100V Inputs System Zones 660A 60W 60W 6 Six-zone *Minimum guaranteed power in watts at 1 kHz with 0.5% THD
