Resumo do conteúdo contido na página número 1
ENGLISH
MODEL
( ) ( )
XL-HF201P BK / XL-HF301P T
HI FI COMPONENT SYSTEM
OPERATION MANUAL
XL-HF201P(BK) Hi Fi Component System consisting of XL-HF201P(BK) (main unit) and CP-HF200 (speaker system).
XL-HF301P(T) Hi Fi Component System consisting of XL-HF301P(T) (main unit) and CP-HF301 (speaker system).
XL-HF201 XL-HF301
“Made for iPod,” “Made for iPhone,” and “Made for iPad” mean that an electronic
accessory has been designed to connect specifi cally to iPod, iPhone, or iPad,
respectively, and
Resumo do conteúdo contido na página número 2
SPECIAL NOTES NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, residential installation. This equipment generates, uses, DO NOT REMOVE COVER (OR BACK). NO USER- and can radiate radio frequency energy and, if not installed SERVICEABLE PARTS INSIDE. REFER SERVICIN
Resumo do conteúdo contido na página número 3
IMPORTANT SAFETY INSTRUCTIONS (continued) 11) Only use attachments/accessories specifi ed by the 20) Safety Check - Upon completion of any service or manufacturer. repairs to this product, ask the service technician to 12) Use only with the cart, stand, tripod, perform safety checks to determine that the product is bracket, or table specifi ed by the in proper operating condition. manufacturer, or sold with the apparatus. 21) Wall or ceiling mounting - When mounting the product When a cart is
Resumo do conteúdo contido na página número 4
For U.S. customer only CONSUMER LIMITED WARRANTY SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand product (the "Product"), when ship in its original container, will be free from defective workmanship and materials, and agrees that it will, at its option, either repair the defect or replace the defective Product or part thereof with a new or remanufactured equivalent at no charge to the purchaser for parts or labor for the period(s) set forth below. Th
Resumo do conteúdo contido na página número 5
Audio signal System connections (continued) Make sure to unplug the AC power cord before making any connections. Installing the AM loop antenna < Attaching AM loop Right < Assembling > to the wall > antenna speaker Wall screws (not supplied) Video cable (not supplied) To video input jack Left FM antenna speaker AC outlet (AC 120 V ~ 60 Hz) Red Black Volume control Line input connection (TV, etc.) The sound level at a given volume setting depends on speaker effi ciency, Connect to the TV u
Resumo do conteúdo contido na página número 6
Auto power off function Remote control The main unit will enter the stand-by mode (when iPod or iPhone is not Battery installation docked) after 15 minutes of inactivity during: iPod: No connection. Use a “AA” size battery (UM/SUM-3, R6, HP-7 or similar). Battery CD / USB: In the stop mode. are not included. AUDIO IN / LINE IN: No detection of input signal or very low sound audibility. 1 Open the battery cover. Note: 2 Insert the battery according to the direction indicated in the battery H
Resumo do conteúdo contido na página número 7
Listening to the iPod, iPhone or iPad (continued) Adaptor for iPod and iPhone connection The message “This accessory is not made to work with Notes: iPhone” or similar, may appear on the iPhone screen when: Please use the adaptor supplied with your iPod or iPhone unit. - battery is low. You can use an audio cable to connect your iPod to the AUDIO IN - the iPhone is not properly docked (eg. slanting). jack if: If this occurs, remove and re-dock the iPhone. 1. your iPod adaptor does not fi t
Resumo do conteúdo contido na página número 8
Listening to the iPod, iPhone or iPad Main unit Remote control Function Operation (continued) Dock/USB Dock USB To disconnect iPod, iPhone or iPad Track up/ Press in the playback down or pause mode. If you Simply remove the iPod or iPhone from the docking station or iPad press the button in the connector from USB terminal. It is safe to do so even during playback. pause mode, press the button to start the Watching videos on a TV connected to iPod desired track. or iPhone Fast Press an
Resumo do conteúdo contido na página número 9
Listening to a CD or MP3/WMA disc (continued) Various disc functions Repeat play Repeat play can play one track, all tracks or a programed sequence Remote Function Main unit Operation continuously. control Play Press in the stop mode. To repeat one track: Press the REPEAT button repeatedly until “Repeat One” appears. Press the (CD/USB ) button. Stop Press in the playback mode. To repeat all tracks: Press the REPEAT button repeatedly until “Repeat All” appears. Press Pause Press in the pl
Resumo do conteúdo contido na página número 10
Procedure to playback MP3/WMA disc Listening to a CD or MP3/WMA disc with folder mode on (continued) To play back CD-R/RW. 3 Press the MEMORY button to save the track number. 1 Press the CD button, and load an MP3/WMA disc. Press the FOLDER 4 Repeat steps 2 - 3 for other tracks. Up to 32 tracks can be programed. button and disc info will be displayed. If you want to check the programed tracks, press the MEMORY button MP3 indicator repeatedly. If you make a mistake, the programed tracks ca
Resumo do conteúdo contido na página número 11
External HDD-storage cannot be played back via USB terminal. Listening to USB mass storage device/ If the data inside the USB memory is large, it may take longer time for MP3 player (continued) the data to be read. This product can play WMA and MP3 fi les. It will automatically detect the To play back USB/MP3 player with folder fi le type being played. If unplayable fi le is played on this product, “Not mode off Support” is indicated and the fi le will be automatically skipped. This will ta
Resumo do conteúdo contido na página número 12
4 Within 30 seconds, press the MEMORY button to store that station in Listening to the radio memory. If the “MEMORY” and preset number indicators disappear before the station is memorized, repeat the operation from step 2. 5 Repeat steps 1 - 4 to set other stations, or to change a preset station. When a new station is stored in the memory, the station previously memorized for that preset channel number will be erased. Note: The backup function protects the memorized stations for a few hours
Resumo do conteúdo contido na página número 13
6 To adjust the day, press the or button and then press Setting the clock (Remote control only) the ENTER button. (continued) 7 Press the ENTER button to adjust the hour. Press the or button and then press the ENTER button. 5 To adjust the hour, press the or button and then press the 8 To adjust the minutes, press the or button and then ENTER button. Press the or button once to advance the time press the ENTER button. by 1 hour. Hold it down to advance continuously. 9 Set the tim
Resumo do conteúdo contido na página número 14
Timer and sleep operation Enhancing your system (Remote control only) (continued) The connection cord is not included. Purchase a commercially available cord as shown below. Sleep operation The radio, compact disc, iPod, USB, Audio In and Line In can all be turned off automatically. 1 Play back the desired sound source. 2 Press the SLEEP button. 3 Within 5 seconds, press the Numeric button to set the time. (1 minute ~ 99 minutes) 4 “SLEEP” will appear. 5 The unit will enter the power stand-b
Resumo do conteúdo contido na página número 15
iPod, iPhone or iPad Troubleshooting chart Many potential problems can be resolved by the owner without calling a Symptom Possible cause service technician. No sound is produced. The iPod, iPhone or iPad is not If something is wrong with this product, check the following before calling your No image appears on playing. authorized SHARP dealer or service center. the TV/monitor. The iPod, iPhone or iPad is not General properly connected to the unit. Is the AC power cord of the unit Symp
Resumo do conteúdo contido na página número 16
CD player Troubleshooting chart (continued) Care of compact discs Type Single disc multi-play compact disc player Signal readout Non-contact, 3-beam Compact discs are fairly resistant to damage, however mistracking can occur semiconductor laser pickup due to an accumulation of dirt on the disc surface. Follow the guidelines below for maximum enjoyment from your CD collection and player. D/A converter Multi bit D/A converter Do not write on either side of the disc, particularly the non-label
