Resumo do conteúdo contido na página número 1
English
CWM7
Resumo do conteúdo contido na página número 2
Welcome to Bowers and Wilkins and the CWM7 Series Thank you for choosing Bowers & Wilkins. When John Bowers first established our company he did so in the belief that imaginative design, innovative engineering and advanced technology were keys that could unlock the enjoyment of audio in the home. His belief is one that we continue to share and it inspires every product we design. The CWM7 Series of in-wall speakers is designed to offer easy installation and very high quality audio reproduct
Resumo do conteúdo contido na página número 3
1. CWM7 Carton Contents 2. CWM7 Series Basics CWM7.3 CWM7.4 1 1 1 CWM7.3 1 • CWM7 Series speaker assembly (baffle, frame/back CWM7 Series in-wall speakers comprise a baffle box, grille) carrying the speaker drivers and crossover, an • Reservoir box integrated back-box and front flange, and a • Cut-out template magnetically secured grille. The back box is connected • Paint mask via external terminals to the speaker cables with the • Port plug baffle connecting automatically as it is inserte
Resumo do conteúdo contido na página número 4
3. Positioning CWM7 Series Speakers CWM7.5 All CWM7 Series speakers require a clear depth of The appropriate position for CWM7 Series speakers Multi-channel Audio Applications 102mm (4.02 in) from the front of the ceiling surface. within the listening environment will depend on their For applications where multiple CWM7 Series speakers specific application: are to be used for multi-channel audio visual systems Note: The CWM7.3 can also be used in landscape the left and right front speakers sho
Resumo do conteúdo contido na página número 5
4. Installing CWM7 Series Speakers To install a CWM7 Series speaker proceed as 4.2 The reservoir box enhances the low frequency 4.3 If speaker cable is already present in the wall described in the following paragraphs: performance of CWM7 Series speakers. It connects space, pull the cable through the aperture. If speaker to the top or bottom of the back box via a hinge and cables are not already installed this should be done at 4.1 Using the supplied cut-out template, mark a cut clamp that en
Resumo do conteúdo contido na página número 6
4.4 Now connect the speaker cable to the spring 4.5 With the back box connected to the cable and its 4.6 If the back box flange is to be painted it should be terminals on the side back box, first looping the reservoir box attached it may be inserted into the wall done at this stage. Any conventional, domestic paint cable around the strain relief bar. The diagram above aperture and cavity. Correct back box orientation must may be applied by brushing, rolling or spraying. Use illustrates cable
Resumo do conteúdo contido na página número 7
4.7 The baffle can now be inserted into the back box. CWM7.3 Baffle Insertion With the MF/HF baffle in the correct orientation the The baffle insertion and attachment technique is slightly If the CWM7.3 is to be used in landscape orientation baffle assembly can be lifted and inserted in the back different in the case of the CWM7.3 and CWM7.4/5. the MF/HF baffle must be removed and rotated 90° box till it is just sub-flush of the back-box flange. Take In both cases however you should first ens
Resumo do conteúdo contido na página número 8
CWM7.4 and CWM7.5 Baffle Insertion 4.8 A port plug accessory is included with CWM7 The CWM7.4/5 baffle assembly is held in the back Series speakers. The plug can be used if desired to box by a combination of hinge features and push-lock reduce bass output by obstructing the speaker’s reflex fasteners. To secure the baffle assembly in the back port. Simply push the plug into the reflex port. The box, lift the baffle up to the back box and engage the diagram above illustrates insertion of the
Resumo do conteúdo contido na página número 9
4.9 The grille can now be fitted to the baffle. It is held in place magnetically so simply needs to be aligned with the groove in the back box flange where it will click into place. The diagram above illustrates fitting the grille. The CWM7 Series speaker is now installed and ready for use. 9
Resumo do conteúdo contido na página número 10
Issue1 B&W Group Ltd B&W Group (UK Sales) Copyright © B&W Group Ltd. E&OE Dale Road T +44 (0) 1903 221 500 Worthing West Sussex E uksales@bwgroup.com BN11 2BH England B&W Group North America T +44 (0) 1903 221 800 T +1 978 664 2870 F +44 (0) 1903 221 801 E marketing@bwgroupusa.com info@bwgroup.com www.bowers-wilkins.com B&W Group Asia Ltd T +852 3 472 9300 E info@bwgroup.hk
